Pioneer AVIC-F60BT Bedienungsanleitung

Black plate (1,1)

Installation Manual

NAVIGATION AV PLAYER

AVIC-F60BT

English

<CRB4352-A>1

Black plate (2,1)

Precautions

Your new product and this manual 3

Important safeguards 3

Connection

Precautions before connecting the

system 5

Before installing this product 5

To prevent damage 6

–Notice for the blue/white lead 6

Parts supplied 7

Connecting the power cord (1) 8

Connecting the power cord (2) 10

Connecting the system 12

Connecting to separately sold power

amp 13

Connecting an iPhone with Lightning

connector 14

–Connecting via the USB port 14

Connecting an iPhone with 30-pin

connector 14

–Connecting via the AUX input 14

–Connecting via the RGB input 15

Connecting the MirrorLink™device 15

Connecting a rear view camera 16

Connecting the external video

component 17

–Using AV input 17

–Using an AUX input 18

Connecting the rear display 19

–When using a rear display connected to

rear video output 19

Installation

Precautions before installation 20

To avoid electromagnetic interference 20

Before installing 20

Installing this product 21

–Installation notes 21

–Parts supplied 22

–Installation using the screw holes on

the side of this product 22

Installing the GPS aerial 23

–Installation notes 23

–Parts supplied 23

–When installing the aerial inside the

vehicle (on the dashboard or rear

shelf) 24

Installing the microphone 25

–Parts supplied 25

–Mounting on the sun visor 25

–Installation on the steering column 26

–Adjusting the microphone angle 26

After installation

After installing this product 27

<CRB4352-A>2

Contents

Engb

Black plate (3,1)

Your new product and this

manual

!The navigation features of this product

(and the rear view camera option if pur-

chased) are intended solely to aid you in

the operation of your vehicle. It is not a sub-

stitute for your attentiveness, judgement

and care when driving.

!Never use this product to route to hospi-

tals, police stations, or similar facilities in

an emergency. Please call the appropriate

emergency number.

!Do not operate this product, any applica-

tions, or the rear view camera option (if pur-

chased) if doing so will divert your attention

in any way from the safe operation of your

vehicle. Always observe safe driving rules

and follow all existing traffic regulations. If

you experience difficulty in operating this

product or reading the display, park your

vehicle in a safe location and apply the

handbrake before making the necessary

adjustments.

!This manual explains how to install this

product in your vehicle. Operation of this

product is explained in the separate man-

uals.

!Do not install this product where it may (i)

obstruct the driver’s vision, (ii) impair the

performance of any of the vehicle’s operat-

ing systems of safety features, including

airbags, hazard lamp buttons, or (iii) impair

the driver’s ability to safely operate the vehi-

cle. In some cases, it may not be possible

to install this product because of the vehi-

cle type or the shape of the vehicle inter-

ior.

Important safeguards

WARNING

Pioneer does not recommend that you install

this product yourself. This product is de-

signed for professional installation only. We

recommend that only authorised Pioneer ser-

vice personnel, who have special training

and experience in mobile electronics, set up

and install this product. NEVER SERVICE

THIS PRODUCT YOURSELF. Installing or

servicing this product and its connecting

cables may expose you to the risk of electric

shock or other hazards, and can cause da-

mage to this product that is not covered by

warranty.

!Read this manual fully and carefully before

installing this product.

!Keep this manual handy for future refer-

ence.

!Pay close attention to all warnings in this

manual and follow the instructions care-

fully.

!This product may in certain circumstances

display inaccurate position of your vehicle,

the distance of objects shown on the

screen, and compass directions. In addi-

tion, the system has certain limitations, in-

cluding the inability to identify one-way

streets, temporary traffic restrictions and

potentially unsafe driving areas. Please ex-

ercise your own judgement in the light of

actual driving conditions.

!As with any accessory in your vehicle’s in-

terior, this product should not divert your

attention from the safe operation of your

vehicle as it may result in serious injury or

death. If you experience difficulty in operat-

ing the system or reading the display,

please make adjustments while safely

parked.

!Please remember to wear your seat belt at

all times while operating your vehicle. If

you are in an accident, your injuries can be

considerably more severe if your seat belt

is not properly fastened.

<CRB4352-A>3

Engb 3

Section

Precautions

Black plate (4,1)

!Certain country and government laws may

prohibit or restrict the placement and use

of this product in your vehicle. Please com-

ply with all applicable laws and regulations

regarding the use, installation and opera-

tion of this product.

<CRB4352-A>4

Engb

Section

01 Precautions

Black plate (5,1)

Precautions before

connecting the system

WARNING

Do not take any steps to tamper with or dis-

able the handbrake interlock system which

is in place for your protection. Tampering

with or disabling the handbrake interlock

system could result in serious injury or

death.

CAUTION

!If you decide to perform the installation

yourself, and have special training and ex-

perience in the mobile electronics instal-

lations, please carefully follow all of the

steps in the installation manual.

!Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wir-

ing to remain exposed.

!Do not directly connect the yellow lead of

this product to the vehicle battery. If the

lead is directly connected to the battery,

engine vibration may eventually cause

the insulation to fail at the point where

the wire passes from the passenger com-

partment into the engine compartment. If

the yellow lead’s insulation tears as a re-

sult of contact with metal parts, short-cir-

cuiting can occur, resulting in

considerable danger.

!It is extremely dangerous to allow cables

to become wound around the steering col-

umn or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or hin-

der driving.

!Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts, espe-

cially the steering wheel, gearstick, hand-

brake, sliding seat tracks, doors, or any of

the vehicle’s controls.

!Do not route wires where they will be ex-

posed to high temperatures. If the insula-

tion heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

!Do not cut the GPS aerial cable to shorten

it or use an extension to make it longer.

Altering the aerial cable could result in a

short circuit or malfunction.

!Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse resis-

tor or filter, etc.) may fail to work properly.

!Never feed power to other electronic pro-

ducts by cutting the insulation of the

power supply lead of this product and tap-

ping into the lead. The current capacity of

the lead will be exceeded, causing over-

heating.

Before installing this product

!Use this unit with a 12-volt battery and ne-

gative earthing only. Failure to do so may

result in a fire or malfunction.

!To avoid shorts in the electrical system, be

sure to disconnect the (–) battery cable be-

fore installation.

<CRB4352-A>5

Engb 5

Section

Connection

Black plate (6,1)

To prevent damage

WARNING

!Use speakers over 50 W (output value)

and between 4 Wto 8 W(impedance value).

Do not use 1 Wto 3 Wspeakers for this

unit.

!The black cable is earth. When installing

this unit or power amp (sold separately),

make sure to connect the earth wire first.

Ensure that the earth wire is properly con-

nected to metal parts of the car’s body.

The earth wire of the power amp and the

one of this unit or any other device must

be connected to the car separately with

different screws. If the screw for the earth

wire loosens or falls out, it could result in

fire generation of smoke or malfunction.

Earth wire

Metal parts of car’s bod

Power amp

Other devices

(Another electronic

device in the car)

*1Not supplied for this unit.

!When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

!When disconnecting a connector, pull the

connector itself. Do not pull the lead, as

you may pull it out of the connector.

!This product cannot be installed in a vehi-

cle without ACC (accessory) position on

the ignition switch.

ACC position No ACC position

!To avoid short-circuiting, cover the discon-

nected lead with insulating tape. It is espe-

cially important to insulate all unused

speaker leads, which if left uncovered may

cause a short circuit.

!Attach the connectors of the same colour

to the corresponding coloured port, i.e.,

blue connector to the blue port, black to

black, etc.

!Refer to the owner’s manual for details on

connecting the power amp and other units,

then make connections accordingly.

!Since a unique BPTL circuit is employed,

do not directly earth the *side of the

speaker lead or connect the *side of an-

other side of the speaker lead together. Be

sure to connect the *side of the speaker

lead to the *side of the speaker lead on

this product.

Notice for the blue/white lead

!When the ignition switch is turned on (ACC

ON), a control signal is output through the

blue/white lead. Connect to an external

power amp’s system remote control term-

inal, the auto-aerial relay control terminal,

or the aerial booster power control terminal

(max. 300 mA 12 V DC). The control signal

is output through the blue/white lead, even

if the audio source is switched off.

!Be sure not to use this lead as the power

supply lead for the external power amps.

Such connection could cause excessive

current drain and malfunction.

!Be sure not to use this lead as the power

supply lead for the auto-aerial or aerial

booster. Such connection could cause ex-

cessive current drain and malfunction.

<CRB4352-A>6

Engb

Section

02 Connection

Black plate (7,1)

Parts supplied

This product Power cord

GPS aerial Microphone

USB cable

<CRB4352-A>7

Engb 7

Section

Connection

Black plate (8,1)

Connecting the power cord (1)

















Yellow

To terminal supplied with power regardless of

ignition switch position.

Red

To electric terminal controlled by ignition

switch (12 V DC) ON/OFF.

Orange/white

To lighting switch terminal.

Black (earth)

To vehicle (metal) body.

With a two-speaker system, do not connect anything

to the speaker leads that are not connected to

speakers.

When a subwoofer is connected to this product

instead of a rear speaker, change the rear output

setting in the initial setting. (Refer to Operation

Manual.) The subwoofer output of this product is

monaural.

Note

White Grey

Front speakerFront speaker

White/black Grey/black

Left Right

Rear speaker or

subwoofer (4

Ω

)

Rear speaker or

subwoofer (4

Ω

)

Green Violet

Green/black Violet/black





Green Violet

When using a subwoofer of 70 W (2

Ω

), be sure to connect with violet and violet/black leads of this

product. Do not connect anything with green and green/black leads.

Green/black Violet/black

Not used. Subwoofer (4

Ω

)



<CRB4352-A>8

Engb

Section

02 Connection

Black plate (9,1)

Audio source will be set to mute or attenuate, while

the following sounds will not be muted or

attenuated. For details, refer to Operation Manual.

—

Voice guidance of the navigation

—

Incoming ring tone and incoming voice of the

mobile phone that is connected to this product

via Bluetooth wireless technology

Note

Yellow/black (MUTE)

If you use equipment with a mute

function, connect that equipment to

the Audio Mute lead. If not, keep the

Audio Mute lead free of any

connections.

Blue/white (SYSTEM REMOTE CONTROL)

To auto-aerial relay control terminal or aerial booster

power control terminal (max. 300 mA 12 V DC).

If the vehicle has a glass aerial, connect to the aerial

booster power control terminal (max. 300 mA 12 V DC).

This product

Fuse (10 A)

14 cm

Power supply

Power cord

<CRB4352-A>9

Engb 9

Section

Connection

Black plate (10,1)

Connecting the power cord (2)

Pink (CAR SPEED SIGNAL INPUT)

This product is connected here to detect the distance the vehicle travels. Always connect the

vehicle’s speed detection circuit. Failure to make this connection will increase errors in the

vehicle’s location display.

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND MUST

BE CONNECTED TO THE POWER SUPPLY SIDE OF THE

HANDBRAKE SWITCH. IMPROPER CONNECTION OR

USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW

AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the handbrake. This lead must be connected to the power supply side

of the handbrake switch.

If this connection is made incorrectly or omitted, certain functions of this product will be unusable.

Power supply side

Earth side

Handbrake switch

The position of the speed detection circuit and the position of the handbrake switch vary

depending on the vehicle model. For details, consult your authorised Pioneer dealer or an

installation professional.

Note

WARNING

CAUTION

It is strongly suggested that the speed pulse wire be connected for accuracy of navigation

and better performance.

IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING

ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLE´S ANTILOCK

BRAKING SYSTEM, AUTOMATIC GEARBOX AND SPEEDOMETER INDICATION.

WARNING

<CRB4352-A>10

Engb

Section

02 Connection

Andere Handbücher für AVIC-F60BT

Inhaltsverzeichnis

Andere Pioneer Auto-Navigationssystem Handbücher

Pioneer

Pioneer AVIC-F7200 Bedienungsanleitung

Pioneer

Pioneer AVIC-80DVD Bedienungsanleitung

Pioneer

Pioneer AVIC-F70BT Bedienungsanleitung

Pioneer

Pioneer AVIC-D1 Bedienungsanleitung

Pioneer

Pioneer AVIC-Z110BT Bedienungsanleitung

Pioneer

Pioneer AVIC-F900BT/XS/RE Bedienungsanleitung

Pioneer

Pioneer AVIC-Z930DAB Bedienungsanleitung

Pioneer

Pioneer AVIC-N3 Bedienungsanleitung

Pioneer

Pioneer AVIC-F9880BT Bedienungsanleitung

Pioneer

Pioneer AVIC-X950BH Bedienungsanleitung

Pioneer

Pioneer AVIC N2 - Navigation System With DVD player Bedienungsanleitung

Pioneer

Pioneer AVIC-F88DAB Betriebsanleitung

Pioneer

Pioneer AVIC-D3 - Navigation System With DVD Player Bedienungsanleitung

Pioneer

Pioneer AVIC-X9115BT Bedienungsanleitung

Pioneer

Pioneer AVIC-F77DAB Bedienungsanleitung

Pioneer

Pioneer AVIC-EVO1-PL2-VAL Bedienungsanleitung

Pioneer

Pioneer AVIC-HD3 Bedienungsanleitung

Pioneer

Pioneer AVIC-8100NEX Bedienungsanleitung

Pioneer

Pioneer AVIC-Z1000DAB Bedienungsanleitung

Pioneer

Pioneer AVIC-80DVD Bedienungsanleitung

Pioneer

Pioneer AVIC-Z1000DAB Bedienungsanleitung

Pioneer

Pioneer AVIC-F20BT Betriebsanleitung

Pioneer

Pioneer AVIC-HD3 Bedienungsanleitung

Pioneer

Pioneer AVIC-Z820DAB Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Garmin

Garmin StreetPilot c510 Bedienungsanleitung

Garmin

Garmin nüvi 2200 Bedienungsanleitung

Garmin

Garmin 2610/2650 Bedienungsanleitung

Mazda

Mazda 107006AN Bedienungsanleitung

Toyota

Toyota TNS600 Bedienungsanleitung

Toyota

Toyota TNS 200 Bedienungsanleitung