Planet FT-712 Bedienungsanleitung

Fast Ethernet Converter

100Base-FX

Multi-mode to Single-mode

Trademarks

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

The information in this manual is subject to change without notice.

All other trademarks belong to their respective owners.

FCC Warning

This equipment has been tested and found to comply with the

regulations for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with this user’s guide, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at his own

expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product

may cause radio interference, in which case the user may be

required to take adequate measures.

Revision

User's manual for PLANET Fast Ethernet Converter

Model: FT-712, FT-722, FT-733, FT-744

Rev 1.0 (Feb. 2000)

Part No. EMFT722V1

1. Overview

Thank you for purchasing PLANET FT-7XX family Fast Ethernet

Fiber-optic Converter. This converter is used to convert one type

media signal to other type equivalent that allows two type segments

connect easily, efficiently and inexpensively. This converter can be

used as a standalone unit or as a slide-in module to the 19”media

chassis (up to 10 units) for a multi-mode and single-mode Fiber

combined networks at a central wiring closet. Please contact with

your sales representative for more about the 19”media chassis.

2. Model List

Your Fast Ethernet Converter comes with one of the following

models.

ðFT-712 : one onboard ST and SC fiber connector

ðFT-722 : two on board SC fiber connectors

ðFT-733 : two on board MT-RJ fiber connectors

ðFT-744 : two on board VF-45 fiber connectors

In the following sections, the term “FT-7XX”indicates the product

family above, the term “MM”and “SM”represent Multi-Mode and

Single Mode fiber-optic mode.

3. Checklist

Your FT-7XX carton should contain the following items:

ðThe Fast Ethernet Converter

ðAC-DC Power Adapter (Output: 5VDC, 1 A max.)

ðThis user’s guide

If any item is missing or damaged, please consult the dealer from

whom you purchased your Fast Ethernet Converter.

4. Product Outlook

Right View (FT-712/FT-722)

Multi Mode

Single Mode

Two fiber-optic connectors, multi-mode on the left, single-mode

on the right and five LED indicators.

For FT-733, FT-744, the outlook of fiber port is accordant to its

related port, i.e. MT-RJ or VF-45.

Rear View (FT-7XX)

One DC jack for DC power input.

5. Installing the Converter

Please follow these steps to install the converter:

•Turn off the power of the device/station in a network to which

the FT-7XX will be attached

•Ensure that there is no activity in the network

•Attach MM fiber cables from the FT-7XX to the MM fiber

network. TX, RX must be paired at both ends

•Attach SM fiber cables from the FT-7XX to the SM fiber

network. TX, RX must be paired at both ends.

•Connect the 5VDC power adapter to the FT-7XX and verify

that the Power LED lights up.

•Turn on the power of the device/station, the Link and LEDs

should light when all cables are attached

FT-7XX

100Base-FX

Multi-Mode

Fiber Network

100Base-FX

Single-Mode

Fiber Network

Note:

nTo prevent from optic acceptor malfunction, check the both

wires before power on the converter.

6. Duplex Mode setting

The FT-7XX is a transparent device between the two fiber

networks, please make sure the both networks are set to the same

duplex environment, or you may get a worse performance in both

networks. Connect with full-duplex Fast Ethernet networks are

strongly recommended.

7.LED indication

LED COLOR DESCRIPTION

FX ACT Green Blinks when any FX packet is present

FX Link Green Lit when Fiber connection is good

PWR Green Lit when +5VDC power detected

8. Cable Connection Parameter

Fast Ethernet 100Base-X networks allows 512bit time delay

between any two node stations in a collision domain.

The overall bit time of Fiber wires and devices must be within 512

bit time in a segment.

To extend the distance, you may use switch to break up a collision

domain and extend the distance.

The limitations are as below:

Duplex Connection Limitation (max.)

Multi-Mode

MM Half Node to Node

Node to Switch 412 meters

MM Full Node to Node

Node to Switch 2 kilometers

Single-Mode

SM Half Node to Node

Node to Switch 412 meters

SM Full Node to Node

Node to Switch 20 kilometers

9. FT-7XX Technical Specifications

The FT-7XX comes with the following standard features:

•Standard : IEEE802.3u, 100Base-FX, IEEE802.3x Flow-

Control

•Connectors :

ðOne Fiber-optic, 1300nm wavelength, MM

ðOne Fiber-optic, 1300nm wavelength, SM

Connector-type different with models

•Data Transfer Rate :100Mbps

•Duplex mode support :Full or half-duplex mode

•LED indicators :PWR, FX Link, FX ACT, FC

•Power Requirement :5V ,1A

•Ambient Temperature :0°to 70°C

•Humidity :5% to 90%

•Dimension : 26 x 70 x 97mm (HxWxD)

•Cable :

ðMM: 50/125 µm or 62.5/125 µm optic fiber

ðSM: 8.3/125, 8.7/125, 9/125 µm optic fiber

Connecting to Router, Bridge, or Switch, Hub, please refer to the

device’s Technical Manual.

10. Power information

The power jack of FT-7XX is with 2.5mm in the central post and

required +5VDC power input. It will conform to the bundled AC-

DC adapter and Planet’s Media Chassis. Should you have the

problem to make the power connection, please contact your local

sales representative.

Please keep the AC-DC adapter as spare parts when your FT-7XX

is installed to a Media Chassis.

Part No.:EMFT722V1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Planet Medienkonverter Handbücher

Planet

Planet WFT-201 Bedienungsanleitung

Planet

Planet ICS-2100 Bedienungsanleitung

Planet

Planet GT-702 Bedienungsanleitung

Planet

Planet IGTP-802T Bedienungsanleitung

Planet

Planet ICS-100 Bedienungsanleitung

Planet

Planet IXT-900-1X1T Bedienungsanleitung

Planet

Planet WFT-801 Bedienungsanleitung

Planet

Planet ICS-2100 Bedienungsanleitung

Planet

Planet FT-1105A Bedienungsanleitung

Planet

Planet VC-101M Bedienungsanleitung

Planet

Planet GT-915A Bedienungsanleitung

Planet

Planet ICS-100 Bedienungsanleitung

Planet

Planet VC-201A Bedienungsanleitung

Planet

Planet GT-805A Bedienungsanleitung

Planet

Planet ET-508 Bedienungsanleitung

Planet

Planet VC-201A Bedienungsanleitung

Planet

Planet FT-801 Bedienungsanleitung

Planet

Planet GT-922 Bedienungsanleitung

Planet

Planet VF-101-T Bedienungsanleitung

Planet

Planet IGT-900 Series Bedienungsanleitung

Planet

Planet VC-232G Bedienungsanleitung

Planet

Planet WGT-705A Bedienungsanleitung

Planet

Planet FT-701B Bedienungsanleitung

Planet

Planet GTP-805A Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung