Planex GN-1200TW Bedienungsanleitung
10/100/1000 Mbps Gigabit Ethernet
PCI adapter
GN-1200TW
PLANEX COMMUNICATIONS INC
2
CONTENTS
1. INTRODUCTION ..............................................................................................................................3
2. FEATURES & SPECIFICATIONS ..................................................................................................4
(1)
F
EATURES
.......................................................................................................................................4
(2)
P
ACKAGE
C
ONTENTS
.......................................................................................................................4
(3)
T
ECHNICAL
S
PECIFICATION
.............................................................................................................5
3. INSTALLATION ................................................................................................................................6
(1)
H
ARDWARE
I
NSTALLATION
..............................................................................................................6
(2)
D
RIVER
I
NSTALLATION
....................................................................................................................6
Windows 98SE Driver Installation .................................................................................................6
Windows ME Driver Installation..................................................................................................10
Windows 2000 Driver Installation................................................................................................13
Windows XP Driver Installation...................................................................................................18
4. TROUBLESHOOTING...................................................................................................................21
TRADE MARKS ..................................................................................................................................22
3
1. Introduction
This guide is to provide the installation and usage of this adapter for network
installers and users. The Gigabit network adapter complies to 64-bit or 32-bit PCI
specification and supports half/full duplex feature which can double network speed.
This adapter supports 1000Mbps, 100Mbps and 10Mbps network speed, 1000BaseT
operates on all four pairs of category 5 UTP cable, 100BaseTX operates on two pairs
of category 5 UTP cable and 10BaseT operates on Category 3, 4 or 5 UTP cable.
With the Auto-Negotiation technology, network speed is auto detected. When you
connect the adapter to Gigabit Switch or another Gigabit NIC, the speed will be
doubled to 2000Mbps (1000Mbps Transmit and 1000Mbps Receive). If you connect
the adapter to 100BaseTX hub, the network speed is 100Mbps. Similarly, if the hub
is a switching hub which supports full duplex function, then the speed will be doubled
to 200Mbps.
This adapter supplies many drivers including Microsoft Windows 98SE, Me, 2000,
XP, Netware Server 4.x/5.x/6.x, Netware ODI for DOS, Linux, Unix and MAC OS
10.2.x/10.3. Whatever your requirements are ease of installation, superior
performance or responsive support backed up by unlimited technical support, this
adapter is the superior choice.
4
2. Features & Specifications
(1) Features
Supports 64-bit or 32-bit, 66/33MHz PCI Local Bus Master Version 2.2/2.1.
Comply with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x.
Supports IEEE 802.3x full duplex flow control.
Supports IEEE 802.1Q VLAN tagging.
Supports Wake On LAN power management function.
Supports Jumbo Frame.
Plug and Play installation, auto-setup IRQ and I/O address.
Auto-Negotiation, half/full duplex.
(2) Package Contents
GN-1200TW
CD-ROM (User’s Manual & Driver)
Warranty Card
Low Profile Bracket
5
(3) Technical Specification
Topology Star
Connector RJ-45
Standard IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
Transmission 10Mbps/20Mbps
100Mbps/200Mbps
1000Mbps/2000Mbps
Hardware Required IBM compatible PC with available PCI slot
(PCI 2.2/2.1), 64-/32-bits, 66/33MHz
IRQ Line Assigned by system
I/O Address Assigned by system
Drivers Windows 98SE/Me/2000/XP
Netware Server 4.x/5.x/6.x
Netware ODI voor DOS
Linux, Unix
MAC OS 10.2.x/10.3
LEDs Speed, Link/Activity (for 64-bit Model)
Link/Activity (for 32-bit Model)
Dimension 163 x 45 mm (for 64-bit Model)
120 x 40 mm (for 32-bit Model)
Temperature 32 ~ 131° F ( 0 ~ 55° C)
Humidity 10% to 95%(Non-condensing)
Weight 47g
6
3. Installation
(1) Hardware Installation
1. Turn off the computer and remove its cover.
2. Insert the adapter into a PCI slot.
3. Secure this adapter to the rear of the computer chassis and put back the computer
cover.
4. Connect the adapter to the network using twisted-pair cable.
(2) Driver Installation
Windows 98SE Driver Installation
1. In Add New Hardware Wizard, click Next.
7
2. Select Search for the best driver for your device (Recommended). Click Next.
3. Insert the device driver CD-ROM into the CD-ROM drive. Select CD-ROM and Specify a location:
and click Browse to provide the appropriate path (e.g. E:\Win98).Click Next.
8
4. Click Next, Windows will copy all the necessary files to your system
5. Insert Windows 98SE CD-ROM, and then click OK.
6. Click Finish to complete the installation.
7. When Windows prompts you to restart your computer, click Yes.
9
Verifying Successful Installation
To verify successful NIC installation:
1. Right-click My Computer and select Properties.
2. Click the Device Manager tab.
The Device Manager window appears.
3. Scroll down the list of hardware devices to Network Adapters. Click the plus sign (+) to the
left of the icon to d isplay the list of NICs currently configured.
4. Make sure the PCI GN-1200TW is installed and that there is not a red Xor a yellow
exclamation point (!) next to the device.
Uninstalling the Driver
Windows 98SE automatically detects the installation of new hardware. However, Windows 98SE does
not automatically detect removal of driver software. You must first uninstall the NIC driver software
before physically removing the NIC.
To remove the NIC driver and associated software:
1. Start Windows 98SE and log in.
2. Right-click My Computer, and then select Properties.
3. Click the Device Manager tab.
The Device Manager window appears.
4. Scroll down the list of hardware devices to Network Adapters. Click the plus sign (+) to the
left of the icon to d isplay the list of NICs currently configured.
5. Click the NIC you want to uninstall (PCI GN-1200TW), and then click Remove.
6. Click OK to confirm th e removal of the NIC.
Windows prompts for a restart.
7. Turn off the power to the PC.
The driver and associated software are removed from the system. You can now physically
remove the NIC.
10
Windows ME Driver Installation
1. Select Specify the location of the driver (Advanced), click Next.
2. Insert the device driver CD-ROM into the CD-ROM drive. Select Search for the best driver for
your device (Recommended) and click Browse to provide the appropriate path (e.g. E:\Winme).
Click Next.
Inhaltsverzeichnis
Andere Planex PCI-Karte Handbücher
Beliebte PCI-Karte Handbücher anderer Marken
Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung
Micro Innovations
Micro Innovations USB650A Bedienungsanleitung
KTI Networks
KTI Networks KF-310 Bedienungsanleitung
Asus
Asus SpaceLink WL230 Bedienungsanleitung
SIIG
SIIG SC2475 Bedienungsanleitung
TRENDnet
TRENDnet TEW-703PI Bedienungsanleitung
Belkin
Belkin F5D7000F Bedienungsanleitung
Pericom
Pericom PI7C7100 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung
Digium
Digium TE200 Series Bedienungsanleitung
Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung
Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung