PNI IP920W Bedienungsanleitung
PNI IP920W
User manual
»Make sure the camera is securely xed and cannot fall.
»Security cameras should be positioned out of reach of children and pets.
»The camera is designed for indoor use and should not be used outdoor.
»Install your camera away from ovens, stoves and electrical equipment.
»Never immerse the camera in water, only use a soft damp cloth for cleaning.
»To protect your privacy, replace default password with a custom one.
»Don’t try to open the camera and repair it yourself, otherwise warranty is void.
SAFETY WARNINGS
1
Light sensor
Lens
IR LED
Mic
Full HD Two Way Audio Night Vision WiFi
Mobile View Pan & Tilt Video MicroSD slot
Reset
Network interface
microSD card slot
microUSB 5V
power input
Antenna
Features
2
Download App
Download CamHi app from Google Play or App Store
Camera Install
CamHi
3
Add Camera
1. Connect the power adapter to the camera.
2. Wait about 45 seconds. The camera will do a complete pan and tilt
rotation for calibration. After the camera return’s to default position you
can proceed to the next step.
Note: If the camera doesn’t start calibration, press and hold the reset
button for about 10 seconds. You will hear a startup sound.
3. Open the App Click
“Add Camera“
4. Click “Wireless Installation“
4
WiFi Connect
1Enter the wi password of the shown SSID.
3
Your phone will make a sound after you click “Yes“. Hold the phone near to the
camera’s microphone so it will recognize it. When it reaches about 50%, the
camera will make a sound, which means setup was successful.
Wait untill it reaches 100%, the UID of the camera will be shown. (image 1)
2Click “Yes“
(image 1)
5
Add Camera
5
4Enter the camera default password. (default password is: admin)
Click the camera and you will see the video feed. (image 2)
(image 2)
6
App Functions
Preset position:
Insert a number from 1 to 255. There are up to 255 preset
positions. The camera will rotate to the position you set when
inserting the correspondent number.
7
Camera Settings
1Change camera’s default password. The default password is “admin“.
Create a new password for your safety.
(image 3)
8
Camera Settings
3
4
2Recording Schedule:
File duration limit.
Enable or disable recording.
Schedule the recording.
Audio Setting:
Adjust camera’s microphone
input volume.
Adjust camera’s speaker
output volume.
SD card settings:
Check SD card status.
Format SD card.
Note: Power o the camera
when inserting or removing
memory card.
9
Camera Settings
65System settings
Time Setting
Click “Sync with Phone time“
and the camera will set same
date and time as your phone,
or set it manually by clicking
“Device Time Zone“
Note:
If the camera won’t start calibration
after powering on, press and hold the
reset button for about 10 seconds.
You should hear a startup sound.
(image 4)
(image 4)
Inhaltsverzeichnis
Andere PNI Sicherheitskamera Handbücher
PNI
PNI House AHD25 Bedienungsanleitung
PNI
PNI PT942I Bedienungsanleitung
PNI
PNI IP65 live Bedienungsanleitung
PNI
PNI IP240 Bedienungsanleitung
PNI
PNI IP720LR Bedienungsanleitung
PNI
PNI House IP31 Bedienungsanleitung
PNI
PNI IP10MP Bedienungsanleitung
PNI
PNI IP55 Bedienungsanleitung
PNI
PNI 1002CM Bedienungsanleitung
PNI
PNI SafeHome PTZ953W Bedienungsanleitung
PNI
PNI IP930W Bedienungsanleitung
PNI
PNI IP440 Bedienungsanleitung
PNI
PNI IP649 Bedienungsanleitung
PNI
PNI IP550MP Bedienungsanleitung
PNI
PNI PT949S Bedienungsanleitung
PNI
PNI House PTZ1200 Bedienungsanleitung
PNI
PNI IP5MP Bedienungsanleitung
PNI
PNI PTZ943I Bedienungsanleitung
PNI
PNI PT950S Bedienungsanleitung
PNI
PNI IP125 Bedienungsanleitung
