Porter-Cable DBSI325 Bedienungsanleitung

Part No. D24368-024-1

Generator

Instruction

manual

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

The Model and Serial No. plate is located on the frame. Record these

numbers in the spaces below and retain for future reference.

Model No.

Type

Serial No.

ESPAÑOL: PÁGINA 21

FRANÇAIS: PAGE 41

IMPORTANT

Please make certain that the person who is to use this equipment

carefully reads and understands these instructions before starting

operations.

Model

DBSI325

PROFESSIONAL POWER TOOLS

2 — ENG

This product is equipped with a spark arresting muffler. If the product will be used around

flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or

other similar items, then an approved spark arrester must be installed and is legally required in the state of

California. It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the Cal-

ifornia Public Resources Code, unless the engine is equipped with a spark arrestor, as defined in section

4442, and maintained in effective working order. Spark arresters are also required on some U. S. Forest

service land and may also be legally required under other statutes and ordinances.

This product may contain chemicals known to the state of California to cause cancer, birth defects, or other

reproductive harm. This warning is given in compliance with California Proposition 65, as detectable

amounts of chemicals subject to proposition 65 may be contained in this product.

•

SPECIFICATION

MODEL DBSI325

HORSE POWER 6.0

RATED/SURGE WATTS 3250/8500

VOLTAGE 120

AMPERAGE 27.1A

PHASE SINGLE

FREQUENCY 60 Hz

ENGINE SPEED 3600 RPM

MAX. AMBIENT TEMP. 104° F

FUEL CAPACITY .75 GALLON

RUN TIME @ 50%/100% 2.3/1.5 HRS

3 — ENG

WARRANTY

Porter-Cable Corporation

4825 Highway 45 North

P.O. Box 2468

Jackson, TN 38302-2468

1-888-559-8550

PORTER-CABLE CORPORATION warrants to the original purchaser that each new electric generator and service part is

free from defects in material and workmanship, and agrees to repair or replace under this warranty any defective product or

part as follows from the original date of purchase.

2 YEARS – Limited warranty on electric generator alternators and 1 year limited warranty on all other parts.

90 Days – Service parts

Engine warranties are the responsibility of the engine manufacturer. Warranties of merchandise sold by Porter-Cable which

has been manufactured by and identified as the product of another company are the responsibility of the manufacturer of

that product.

THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER

Products sold damaged or incomplete, sold “as is,” sold reconditioned, or used as rental equipment.

Delivery, installation, or normal adjustments explained in the owner’s manual.

Damage or liability caused by shipping, improper handling, improper installation, improper maintenance, improper mod-

ification, or the use of accessories and/or attachments not specifically recommended by PORTER-CABLE for the prod-

uct.

Repairs necessary because of operator abuse or negligence, or the failure to install, operate, maintain, and store the

product according to the instructions in the owner’s manual.

Damage caused by cold, heat, rain, excessive humidity, corrosive environments and materials, or other contaminants.

Expendable items that become worn during normal use such as fuel filters, air cleaners, spark plugs, and engine oil.

Cosmetic defects that do not interfere with product functionality.

Freight costs from customer to Porter-Cable.

Repair and transportation costs of products or parts determined not to be defective.

ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM

ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. Some states do not allow limita-

tions on how long an implied warranty lasts, so the above limitations may not apply to you.

WARRANTY SERVICE is available by delivering or shipping the defective product or part to any Porter-Cable authorized

warranty service location. To determine the nearest authorized warranty service location, call the toll free number, 1-888-

559-8550, 24 hours a day, 7 days a week. Specific instructions regarding servicing arrangements and scheduling may vary

depending on the type and size of the product and the availability of repair parts.

DO NOT return the defective product to the retailer.

Retain the original cash register sales receipt as proof of purchase for warranty work.

Purchasers should contact Porter-Cable directly if they do not receive satisfactory results from the authorized warranty

service center.

4 — ENG

Attempting to connect generator

directly to the electrical system of

any building structure.

Back feeding electricity through a

building’s electrical system to the

outside utility feed lines could endan-

ger repair persons attempting to re-

store service.

Attempting to connect to the incom-

ing utility service could result in elec-

trocution.

Restoration of electrical service while

the generator is connected to the

incoming utility could result in a fire

or serious damage if an isolator

switch is not installed.

Failure to use a double throw transfer

switch when connecting to a struc-

ture's electrical system can damage

appliances and WILL VOID the man-

ufacturer's warranty.

Never backfeed electricity through

a structure's electrical system.

To connect to a structure's electri-

cal system in a safe manner,

always have a Double-Throw

Transfer Switch installed by a quali-

fied electrician and in compliance

with local ordinances. (When in-

stalling a Double-Throw Transfer

Switch, a minimum of 10 gauge

wiring must be used.)

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

RISK OF ELECTROCUTION AND FIRE

When using this product basic precautions should always be fol-

lowed including the following:

• SAVE THESE INSTRUCTIONS •

IMPORTANT SAFETY INSTRUCTIONS

SAFETY GUIDELINES - DEFINITIONS

URGENT SAFETY INFORMATION - A HAZARD

THAT WILL CAUSE SERIOUS INJURY OR

LOSS OF LIFE.

IMPORTANT SAFETY INFORMATION - A HAZ-

ARD THAT MIGHT CAUSE SERIOUS INJURY

OR LOSS OF LIFE.

Information for preventing damage to

equipment.

Information that you should pay special

attention to.

This manual contains information that

is important for you to know and un-

derstand. This information relates to

protecting YOUR SAFETY and PRE-

VENTING EQUIPMENT PROB-

LEMS. To help you recognize this

information, we use symbols to the

right. Please read the manual and pay

attention to these sections.

Improper storage of extension

cord

Extension cord can come into contact

with hot engine parts resulting in

damage. Using a damaged extension

cord can result in electrocution or

death.

Never fold handle over hot engine

with extension cord wrapped on

storage bracket.

5 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

Use of worn, damaged, under-

sized or ungrounded extension

cords.

Placing generator on or against

highly conductive surface, such as

a steel walkway or metal roof.

Improper connection of items to

generator.

Operation of unit when damaged,

or with guards or panels removed.

Contact with worn or damaged ex-

tension cords could result in electro-

cution.

Use of undersize extension cords

could result in overheating of the

wires or attached items, resulting in

fire.

Use of ungrounded cordsets could

prevent operation of circuit breakers

and result in electrical shock.

Accidental leakage of electrical cur-

rent could charge conductive sur-

faces in contact with the generator.

Exceeding the load capacity of the

generator by attaching too many

items, or items with very high load

ratings to it could result in overheat-

ing of some items or their attachment

wiring resulting in fire or electrical

shock.

Attempting to use the unit when it

has been damaged, or when it is not

functioning normally could result in

fire or electrocution.

Removal of guarding could expose

electrically charged components and

result in electrocution.

Inspect extension cords before

use and replace with new cord if

required.

Use proper size (wire gauge) cord-

set for application see chart in the

Assembly section of this manual.

Always use a cordset having a

grounding wire with an appropri-

ate grounding plug. DO NOT use

an ungrounded plug.

Place generator on low conductiv-

ity surface such as a concrete

slab.

ALWAYS operate generator a min-

imum of six feet from any conduc-

tive surface.

Read the load rating chart and in-

structions in the Wattage Calcula-

tion section. Make sure that the

summation of electrical loads for

all attachments does not exceed

the load rating of the generator.

Do not operate generator with me-

chanical or electrical problem.

Have unit repaired by an Autho-

rized Service Center.

Do not operate generator with

protective guarding removed.

RISK OF ELECTROCUTION AND FIRE (cont’d)

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

Operation of generator in rain,

wet, icy, or flooded conditions.

Water is an excellent conductor of

electricity! Water which comes in con-

tact with electrically charged compo-

nents can transmit electricity to the

frame and other surfaces, resulting in

electrical shock to anyone contacting

them.

Operate generator in a clean, dry,

well ventilated area. Make sure

hands are dry before touching unit.

6 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF FIRE

Inadequate ventilation for generator

Use care in filling the tank to avoid

spilling fuel. Make sure fuel cap is

secured tightly and check engine

for fuel leaks before starting

engine. Move generator away

from refueling area or any spillage

before starting engine. Allow for

fuel expansion. Keep maximum

fuel level 1/2 inch below the tip of

the fuel tank. Never refuel with

the engine running.

Spilled fuel and its vapors can

become ignited from hot surfaces or

sparks.

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

Attempting to fill the fuel tank while

the engine is running.

Sparks, fire, hot objects

Improper storage of fuel

Tampering with factory set engine

speed settings.

Overfilling the fuel tank –

fuel spillage.

Gasoline and gasoline vapors can

become ignited by coming in contact

with hot components such as the

muffler, engine exhaust gases, or from

an electrical spark.

Cigarettes, sparks, fires, or other hot

objects can cause gasoline or gaso-

line vapors to ignite.

Improperly stored fuel could lead to

accidental ignition. Fuel improperly se-

cured could get into the hands of chil-

dren or other unqualified persons.

Materials placed against or near the

generator or operating the generator in

areas where the temperature exceeds

104° F. ambient (such as storage

rooms or garages) can interfere with its

proper ventilation features causing

overheating and possible ignition of the

materials or buildings.

Engine speed has been factory set to

provide safe operation. Tampering with

the engine speed adjustment could re-

sult in overheating of attachments and

could cause a fire.

Turn engine off and allow it to cool

before adding fuel to the tank.

Equip area of operation with a fire

extinguisher certified to handle

gasoline or fuel fires.

Add fuel to tank in well ventilated

area. Make sure there are no sourc-

es of ignition near the generator.

Store fuel in a OSHA approved

container designed to hold gaso-

line. Store container in secure loca-

tion to prevent use by others.

Operate generator in a clean, dry,

well ventilated area a minimum of

four feet from any building, object

or wall. DO NOT OPERATE UNIT

INDOORS OR IN ANY CONFINED

AREA.

Never attempt to “speed-up” the

engine to obtain more perfor-

mance. Both the output voltage

and frequency will be thrown out of

standard by this practice, endan-

gering attachments and the user.

7 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF BREATHING - INHALATION HAZARD

Operate generator in clean, dry,

well ventilated area. Never operate

unit in enclosed areas such as

garages, basements, storage,

sheds, or in any location occupied

by humans or animals. Keep chil-

dren, pets and others away from

area of operating unit.

Breathing exhaust fumes will cause

serious injury or death.

Gasoline engines produce toxic car-

bon monoxide exhaust fumes.

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

Risk of Injury and Property Damage When

Transporting Generator

If generator is equipped with a fuel

shut-off valve, turn the valve to the

off position before transporting to

avoid fuel leaks. If generator is not

equipped with a fuel shut-off valve,

drain the fuel from tank before

transporting. Transport fuel only in

an OSHA approved container.

Always place generator on a pro-

tective mat when transporting to

protect against damage to vehicle

from leaks. Remove generator from

vehicle immediately upon arrival at

your destination.

Fuel or oil can leak or spill and could

result in fire or breathing hazard, seri-

ous injury or death can result. Fuel or

oil leaks will damage carpet, paint or

other surfaces in vehicles or trailers.

Fire, Inhalation, Damage to Vehicle

Surfaces

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

8 — ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

• Review and understand all of

the operating instructions and

warnings in this manual.

• Become familiar with the oper-

ation and controls of the gen-

erator. Know how to shut it off

quickly.

• Equip area of operation with a

fire extinguisher certified to

handle gasoline or fuel fires.

• Keep children or others away

from the generator at all times.

All sources of energy include the po-

tential for injury. Unsafe operation or

maintenance of your generator could

lead to serious injury or death to you

or others.

Operation of generator in careless

manner.

RISK OF UNSAFE OPERATION

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

Generator will not operate properly and

will cause damage to the generator

and could cause serious injury or death

to you or others.

Operating generator while suspend-

Never operate generator while sus-

pended or in an unlevel position.

Always operate generate on a flat,

level surface.

Operation of voltage sensitive ap-

pliances without a voltage surge

protector.

Any gasoline operated household gen-

erator will incur voltage variations

causing damage to voltage sensitive

appliances or could result in fire.

Always use a U.L. listed voltage

sensitive surge protector to con-

nect voltage sensitive appliances

(TV, computer, stereo, etc.). Failure

to use a U.L. listed voltage surge

protector will void the warranty

on your generator.

Notice: A multiple outlet strip is

not a surge protector. Make sure

you use a U.L. listed voltage surge

protector.

9 — ENG

RISK FROM LIFTING

HAZARD HOW TO PREVENT ITWHAT COULD HAPPEN

The generator is too heavy to be

lifted by one person. Obtain assis-

tance from others before you try

to move it.

Serious injury can result from attempt-

ing to lift too heavy an object.

Lifting a very heavy object.

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTING TO OPERATE GENERATOR.

RISK OF MOVING PARTS

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

Never operate generator with

guarding or cover plates removed.

Avoid wearing loose fitting clothing

or jewelry which could be caught

by moving parts.

The generator contains parts which

rotate at high speed during operation.

These parts are covered by guarding

to prevent injury.

Contact with moving parts can re-

sult in serious injury.

HAZARD HOW TO PREVENT IT

WHAT COULD HAPPEN

During operation, touch only the

control surfaces of the generator.

Keep children away from the gen-

erator at all times. They may not be

able to recognize the hazards of

this product.

Contact with hot surfaces, such as en-

gines exhaust components, could re-

sult in serious burns.

Contact with hot engine and gener-

ator components.

RISK OF HOT SURFACES

10 — ENG

Extension Cord Wire Gauge Chart

Amperage

*Up to 20 amp draw

Up to 30 amp draw

Cord

Length

0 to 100 ft.

Wire Gauge

Size

12 ga.

10 ga.

*NOTE: When amperage exceeds 20 amps; a 12

gauge extension cord should not be used for long dis-

tances.

Extension Cords

When using an appliance or tool at a considerable dis-

tance from the generator, a 3-wire extension cord that

has a 3-blade grounding plug and a 3-slot receptacle

that accepts the tool's plug MUST be used in order to

reduce the risk of electrical shock. A cord of adequate

size must be used. Using the following chart to deter-

mine the minimum wire size required.

An extension cord that is hot to the touch is

overloaded. Repair or replace damaged exten-

sion cords immediately.

Double Throw Transfer Switch

Potential hazards exist when a portable electric genera-

tor is connected to the main electrical supply coming

into the house. It is at that point that the electrical gen-

erator could feed back into the utility company's sys-

tem causing possible electrocution of workers who are

repairing the electrical lines.

To avoid back feeding of electricity into utility systems,

a double-throw transfer switch must be installed

between the generator and utility power. The Double-

Throw Transfer Switch should be installed by a licensed

electrician and in compliance with all state and local

electrical codes. (When installing a Double-Throw

Transfer Switch, a minimum of 10 gauge wiring

must be used.)

The electrician should also install a sub-panel to isolate

the circuits you would want to use during an emergen-

cy or electrical power outage. Your generator will not

be large enough to handle the load of all the lights, ap-

pliances, TV, etc. at one time. To select which items to

run during the electrical power outage, see Wattage

Calculation section in this manual.

ASSEMBLY

Read this manual. Do not attempt to operate

equipment until you have read this Manual for

Safety, Operation, and Maintenance Instruc-

tions.

Grounding Lug

OBTAINING ELECTRICITY FROM THE

GENERATOR

There are basically 2 ways to obtain electricity from a

generator:

1. Use of extension cords directly from the generator

to the appliance, lights, tools, etc.

2. Use of a double-throw transfer switch installed

directly to the main electrical supply outside of

house.

NOTE: This manual is a general manual. Informa-

tion in this manual may or may not pertain to your

model. Please read carefully.

NOTE: Left and right describes the location of a

part with the operator facing the outlet panel.

REMOVE GENERATOR FROM CARTON

• Open carton from top.

• Cut carton along dotted lines.

• Remove all carton inserts.

• Remove generator through opening in carton.

Fold handles up into operating position and tighten

knobs securely.

Never operate the unit with handles in the fold-

ed position.

IMPORTANT: Before any attempt to start your genera-

tor be sure to check engine oil (See Engine Operator's

manual)

GROUNDING THE GENERATOR

A grounding lug is supplied with the generator for use

when required by local electrical ordinances. Refer to

article 250 of the National Electrical Code to clarify any

needed grounding information. Your local electric com-

pany or a certified electrician should be able to help

you with this information.

NOTE: Your engine is already grounded to the frame by

a grounding strap.

Andere Handbücher für DBSI325

Inhaltsverzeichnis

Andere Porter-Cable Tragbarer Generator Handbücher

Porter-Cable

Porter-Cable PH350IS Bedienungsanleitung

Porter-Cable

Porter-Cable CH350IS Bedienungsanleitung

Porter-Cable

Porter-Cable H450CS, CH350CS, H650CS Bedienungsanleitung

Porter-Cable

Porter-Cable D26779-028-0 Bedienungsanleitung

Porter-Cable

Porter-Cable BS600 Bedienungsanleitung

Porter-Cable

Porter-Cable BSI550-W Bedienungsanleitung

Porter-Cable

Porter-Cable D28362-031-0 Bedienungsanleitung

Porter-Cable

Porter-Cable H451CS Bedienungsanleitung

Porter-Cable

Porter-Cable BSV750-W Bedienungsanleitung

Porter-Cable

Porter-Cable T525 Bedienungsanleitung

Porter-Cable

Porter-Cable N030679 Bedienungsanleitung

Porter-Cable

Porter-Cable D27243-028-0 Bedienungsanleitung

Porter-Cable

Porter-Cable BSI525-W Bedienungsanleitung

Porter-Cable

Porter-Cable generator H650IS-W Bedienungsanleitung

Porter-Cable

Porter-Cable DTE325 Bedienungsanleitung

Porter-Cable

Porter-Cable DBSI325-1 Bedienungsanleitung

Porter-Cable

Porter-Cable BSI550 Bedienungsanleitung

Porter-Cable

Porter-Cable DTE325 Bedienungsanleitung

Porter-Cable

Porter-Cable D26860 Bedienungsanleitung

Porter-Cable

Porter-Cable H1000IS-W Bedienungsanleitung

Porter-Cable

Porter-Cable BSV550-W Bedienungsanleitung

Porter-Cable

Porter-Cable BSV750 Bedienungsanleitung

Porter-Cable

Porter-Cable CH250 Bedienungsanleitung

Porter-Cable

Porter-Cable PCG2200 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung