ProLights SOLAR27Q Bedienungsanleitung

USER MANUAL

MANUALE UTENTE

SOLAR27Q

OUTDOOR COMPACT WASHLIGHT

EN - IT

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteris-

tics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’section on site www.musiclights.it

REV.002-12/18

SOLAR27Q

Packing content • SOLAR27Q

• S27QFILTER60

• Power cable

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX addressing conguration

3. 6 DMX mode conguration

3. 7 DMX addressing

3. 8 Wireless

3. 9 Screen

3. 10 Dimmer mode

3. 11 White balance

3. 12 LED Frequency

3. 13 Factory reload

3. 14 Information

3. 15 Master/Slave

3. 16 Eect

3. 17 Static

3. 18 Manual

3. 19 Connection of the DMX line

3. 20 Construction of the DMX termination

3. 21 DMX control

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting

SOLAR27Q

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 50°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

SOLAR27Q

- 1 - INTRODUCTION

1.1 DESCRIPTION

SOLAR27Q is a compact fan-free outdoor wash light featuring an outstanding brightness of 10,832

lumens. Equipped with 27x10W RGBW full colour LEDs, delivering superior colour mixing. Featuring a

slim size as well as the multiple interchangeable optics through magnets, including asymmetrical lters

which, all together, make the SOLAR27Q an incredibly exible device for indoor use and outdoor. Whilst

highly-powerful, the SOLAR27Q also benets from being silent.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source:27x10 W CREE RGBW

• CT:5960 K

• CRI:71,8

• Luminous Flux:@FULL 10832 lm - With included lter 6987 lm

• Lux:@FULL (25°) 6133 lux - With included lter 1027 lux @3m Full

• Lux:@FULL (25°) 2208 lux - With included lter 370 lux @5m Full

• Source Life Expectancy: >50.000 h

• Other:Magnetic lter included to achieve 45° (60° lter), barndoor not included

OPTICS

• Beam angle:25° - With included lter 45 °

• Field angle:39° - With included lter 69 °

• Lens diameter:36 mm

• Lens type: honeycomb gapless plano-convex optics

• Additional optics:10° / 15° / 45° / 40° lter / 10X60° lter / 30X60° lter

COLOR SYSTEM

• Color Mixing: RGBW/FC

• CTC: CTC control through independent DMX channel

• Color Wheel: Virtual color wheel with presets

DYNAMIC EFFECTS

• Static Color Mode: Selection of static color

• Manual Color Mode: Manual adjustment of color

• Auto Mode: Built-in programs with execution speed adjustment

BODY

• Hardware On-board:Magnetic lter frame with 45° lter

• Tilt Angle:+/- 90 ° Manual

• Body: Sturdy die-cast aluminium body conceived for long-time durability

• Body Color: Black

CONTROL

• Protocols: DMX512, RDM, W-DMX

• DMX channels:5 / 7 / 10 / 13 / 17 channel

• Pixel control:3 horizontal individually select and control sections

• W-DMX: included, wireless solution receiver

• RDM: RDM ready for xture remote monitor and settings

SOLAR27Q

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0~100% electronic dimmer

• Dimmer curves: dierent dimming curves available

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -20° ~ +50°

• Flicker: icker free frequency with adjustable PWM

• Selectable PWM: 600~25K Hz

ELECTRICAL

• Power supply: 100-240V – 50/60Hz

• Power consumption (at 230V):268 W

• Power consumption (at 120V):275 W

• Output (at 230V):9 units on a single power line

• Output (at 120V):5 units on a single power line

• Power factor:0,994

PHYSICAL

• Cooling: natural cooling of the peculiar chassis and to absence of fans

• Sospension and xing: hanging bracket for oor positioning with“Quick-Lock” system

• Signal connection: Seetronic XLR 5p IN/OUT connectors

• Data connection: W-DMX OEM TRX

• Power connection: Seetronic powerCON waterproof IN/OUT connectors

• IP rating:65 for temporary outdoor application, not for xed installation

• Dimensions (WxHxD):454x153x268.5 mm

• Weight:9 kg

Technical drawing Fig.1

454mm/17,87in 83mm/

3,26in

268.5mm/11,24in

SOLAR27Q

1 32

89 9 8

4 5 6 7 1

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. KNOB

2. W-DMX receiver

3. POWER IN (PowerCON TRUE IN): for connection

to a socket (100-240V/50-60Hz) via the supplied

mains cable,

4. DMX IN (5-pole XLR): 1 = massa, 2 = DMX -, 3 =

DMX +, 4 N/C, 5 N/C.

5. CONTROL PANEL with display and 4 touch but-

tons used to access the control panel functions

and manage them.

6. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-, 3

= DMX+, 4 N/C, 5 N/C.

7. POWER OUT: connect to supply power to the

next unit.

8. HOLE for safety cable passage

9. HOLE for quick-lock omega bracket Fig.2

SOLAR27Q

- 2 - INSTALLATION

2.1 MOUNTING

The SOLAR27Q may be set up on a solid and even surface. By means of the xing facilities of the baseplate,

the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

OMEGA

QUICK-LOCK

SAFETY

CABLE

SAFETY

CABLE

CLAMP

SOLAR27Q

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the SOLAR27Q is ready for operation. To switch

o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to

connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The control panel of SOLAR27Q has a display and 4 buttons for the complete programming and manage-

ment of the projector menu (g.4).

MENU UP DOWN ENTER

Used to access the menu or to

return a previous menu option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in a

function

Used to select and store the

current menu or conrm the

current function value or option

within a menu

Fig.4 - Functions of the buttons and display icons

Up Down

Mode Enter

SOLAR27Q

3.3 MENU STRUCTURE

1CONNECT ðDMX Address ð1-512

DMX Mode ð5CH

7CH

10CH

13CH

17CH

Wireless ðReceive On/O

Receive Reset

On/O

No/Yes

Wireless on DMX ðNo/Yes

2SET UP ðScreen ðBacklight

Key Lock

On/10s/20s/30s

No/Yes

3ADVANCED ðDimmer Mode ðO/Dimmer1/2/3

White Balance ðO

Adjust ðRed

Green

Blue

White

ð<125-255>

LED Frequency ð600Hz/1200Hz/2000Hz/4000Hz/6000Hz/25kHz

Factory Reload ðNo/Yes

4INFORMATION ðFixture Time

Version

UID

0-9999

V1.0

<15D00220****>

5STAND ALONE ðMaster/Slave ðMaster

Slave

Eects ðEect1

…

Eect9

ðSpeed 1-100

Static ðFixed Color ðR

RGB

RGW

RBW

GBW

RGBW

ðManual color ðRed

Green

Blue

White

ð<000-255>

Inhaltsverzeichnis

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights PF5 Series Bedienungsanleitung

ProLights

ProLights jetbeam-2 Bedienungsanleitung

ProLights

ProLights PHYROBUB Bedienungsanleitung

ProLights

ProLights ARCLED1107UV Bedienungsanleitung

ProLights

ProLights MINICLIPSEWD Bedienungsanleitung

ProLights

ProLights LUMIPAR6Q Bedienungsanleitung

ProLights

ProLights ARENACOB4HALO Bedienungsanleitung

ProLights

ProLights JETSPOT-3 Bedienungsanleitung

ProLights

ProLights PANORAMAIPSPOT Bedienungsanleitung

ProLights

ProLights UVPANEL18 Bedienungsanleitung

ProLights

ProLights EclFresnel JrVW Bedienungsanleitung

ProLights

ProLights AlphaPIX6T Bedienungsanleitung

ProLights

ProLights TRIBE AQUA Bedienungsanleitung

ProLights

ProLights 6 BEAM Bedienungsanleitung

ProLights

ProLights LEDPAR64363RGB Bedienungsanleitung

ProLights

ProLights SMARTBATHEX Bedienungsanleitung

ProLights

ProLights VX1300SNOW Bedienungsanleitung

ProLights

ProLights 4MOON Bedienungsanleitung

ProLights

ProLights RADIONSTR Bedienungsanleitung

ProLights

ProLights TRIBE TRUSSPOD3T Bedienungsanleitung

ProLights

ProLights SmartBat PlusG2 Bedienungsanleitung

ProLights

ProLights LEDPINSPOT Bedienungsanleitung

ProLights

ProLights MINIECLFRTU-DY Bedienungsanleitung

ProLights

ProLights VIRTUALDRAPE Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung