ProMinent DULCOTEST DT1B Bedienungsanleitung

DULCOTEST® DT1B

Photometer

Operating manual

A0943

Target group: instructed personnelPart number 985629 BA DT 057 03/17 EN

Please carefully read these operating instructions before use. · Do not discard.

The operator shall be liable for any damage caused by installation or operating errors.

The latest version of the operating instructions are available on our homepage.

General non-discriminatory approach In order to make it easier to read, this

document uses the male form in

grammatical structures but with an

implied neutral sense. It is aimed

equally at both men and women. We

kindly ask female readers for their

understanding in this simplification of

the text.

Supplementary information

Please read the supplementary information in its entirety.

Information

This provides important information relating to the correct operation of the

unit or is intended to make your work easier.

Warning information

Warning information include detailed descriptions of the hazardous situation.

The following symbols are used to highlight instructions, links, lists, results and

other elements in this document:

More symbols

Symbol Description

Action, step by step.

⇨Outcome of an action.

Links to elements or sections of these instructions or other

applicable documents.

nList without set order.

Supplemental directives

Symbol Description

[Button]

Display element (e.g. indicators).

Operating element (e.g. button, switch).

„Display /

GUI“

Screen elements (e.g. buttons, assignment of function keys).

CODE Presentation of software elements and/or texts.

Supplemental directives

Table of contents

1 General Information................................................................................... 5

1.1 Scope of delivery............................................................................... 6

1.2 Instructions for use............................................................................ 8

1.3 Adapter for 16 mm cuvettes............................................................. 11

1.4 Operations carried out on the device............................................... 12

2 Commissioning DT 1B............................................................................. 13

2.1 Commissioning................................................................................ 13

3 Operating Menu....................................................................................... 17

3.1 Operating Menu Options.................................................................. 17

3.2 Operating instructions...................................................................... 18

3.3 Error messages............................................................................... 18

4 Analysis methods..................................................................................... 20

4.1 Procedure instructions when using liquid reagents......................... 20

4.2 Quantitative determination using liquid reagents............................. 22

4.3 Procedure instructions when using tablets...................................... 29

4.4 Quantitative determination using tablets.......................................... 31

5 Calibration ............................................................................................... 44

6 Technical Data......................................................................................... 47

7 Consumables and Spare Parts................................................................ 49

8 Standards Complied with and Declaration of Conformity........................ 50

9 Index........................................................................................................ 51

Table of contents

1 General Information

WARNING!

Danger from hazardous sub‐

stances!

Possible consequence: Fatal or

very serious injuries.

Please ensure when handling

hazardous substances that you

have read the latest safety data

sheets provided by the manu‐

facture of the hazardous sub‐

stance. The actions required

are described in the safety data

sheet. Check the safety data

sheet regularly and replace, if

necessary, as the hazard

potential of a substance can be

re-evaluated at any time based

on new findings.

The system operator is respon‐

sible for ensuring that these

safety data sheets are available

and that they are kept up to

date, as well as for producing

an associated hazard assess‐

ment for the workstations

affected.

General Information

1.1 Scope of delivery

The following components are included as standard:

Description Quan‐

tity

nCase, blue with blue fasteners

– with ProMinent sticker, Photometer Dulcotest DT1B, code

1039315

– and hazard symbol

Foam insert for the case 1

Cover foam for the case 1

nPhotometer DT1B

– Chlorine, bromine, chlorine dioxide, ozone, pH, CyA

– Battery compartment lid with O-ring

Screwdriver with clip, red 1

Countersunk screws 4

Batteries, 1.5 V alkali-manganese, type AA 4

Round cuvettes, 10 ml, d = 24 mm, h = 48 mm 3

Lid for round cuvette, 24 mm, grey 3

Sealing rings for cuvettes, grey 3

Round cuvettes, d = 16 mm, h = 90 mm 3

Lid for round cuvette, 16 mm, white 3

Adapter attachment, grey for 16 mm cuvettes 1

Syringe, 10 ml 1

Plastic mixing rod, 13 cm long 1

Cleaning brush 1

Operating instructions for Dulcotest DT1B 1

DPD -1 tablets 100

General Information

Description Quan‐

tity

DPD -3 tablets 100

PHENOLRED PHOTOMETER tablets 100

CyA TEST tablets 100

CHLORINE HR (KI) tablets 100

ACIDIFYING GP tablets 100

Glycine tablets 20

General Information

1.2 Instructions for use

–

Request the safety data sheets.

–

Reagents are intended for chemical analysis and access to them by

unauthorised persons must not be permitted.

–

You must dispose of reagent solutions properly.

–

Observe the application possibilities, analysis instruction and matrix

effects of the methods.

1. You must thoroughly clean the cuvettes, lids and stirring rod after each

analysis to avoid carry-over errors.

Even slight reagent residue can lead to incorrect measurement results.

For cleaning use the supplied brush.

If the fully reacted water sample is left for any length of time it may pro‐

duce stubborn coloured deposits, which you can remove using dilute (=

4 %) hydrochloric acid.

2. The outer walls of the cuvettes must be clean and dry before the analysis

is carried out. Fingerprints or water droplets on the light-entry surfaces of

the cuvette will result in faulty measurements. The cuvette should there‐

fore be wiped clean with a soft paper tissue (paper handkerchief) before

carrying out the measurement.

3. The zero correction and the analysis must both be carried out using the

same cuvette, as the cuvettes may have slightly varying tolerances.

General Information

A0937

Fig. 1: Cuvette positioning (Ø 24 mm):

I. Seal

II. Marking with the white triangle

4. For the zero correction and test, the cuvette must be positioned in the

sample chamber in such a way that the marking with the white triangle (II.)

points towards the housing marking.

5. You must carry out the zero correction and test with the cuvette lid closed.

You must provide the cuvette lid with a sealing ring (I.) to prevent the

entrance of light into the sample chamber.

6. Formation of bubbles on the inside walls of the cuvette will result in faulty

measurements. Should this happen, seal the cuvette with the cuvette lid

and tip it back and forth to dissolve/remove the bubbles before carrying

out the test.

General Information

7. It is important to prevent water getting into the sample chamber because

this leads to incorrect measurement results.

8. Dirt in the transparent sample chamber leads to incorrect measurement

results. The light entry surfaces should be checked at regular intervals and

cleaned as necessary.

Standard spectacle cleaning cloths and cotton buds are suitable for

cleaning.

9. Pronounced differences in temperature between the photometer and the

surroundings can lead to incorrect measurements, e.g. due to the forma‐

tion of condensation in the sample chamber and on the cuvette.

10. Protect the device from direct sunlight.

A0938

Fig. 2: Correct filling of the cuvette: Left = correct / right = incorrect

11. Fill the cuvette as shown in Fig. 2.

12. Insert the reagent tablets directly from the blister pack into the water

sample, without touching them with your fingers.

13. After use immediately close the dropping bottles containing the liquid

reagents by closing them with the screw caps of the same colour.

14. You must observe the sequence for the addition of reagents without fail.

General Information

Inhaltsverzeichnis

Andere ProMinent Messgerät Handbücher

ProMinent

ProMinent DULCOMETER D1C Bedienungsanleitung

ProMinent

ProMinent DULCOMETER Handbuch

ProMinent

ProMinent Portamess 911 pH Bedienungsanleitung

ProMinent

ProMinent DULCOTEST CDP 1 Bedienungsanleitung

ProMinent

ProMinent Ammonia Bedienungsanleitung

ProMinent

ProMinent DULCOMETER DMT Series Bedienungsanleitung

ProMinent

ProMinent DulcoFlow DFMa series Bedienungsanleitung

ProMinent

ProMinent TUC 1 Bedienungsanleitung

ProMinent

ProMinent DULCOMARIN 3 Compact Handbuch

ProMinent

ProMinent Portamess 911 Conductivity Bedienungsanleitung

ProMinent

ProMinent LF 1 FE Bedienungsanleitung

ProMinent

ProMinent DULCOTROL DWCa Bedienungsanleitung

ProMinent

ProMinent DULCODOS DSWb SP10 Bedienungsanleitung

ProMinent

ProMinent DULCODOS Hydrazin Bedienungsanleitung

ProMinent

ProMinent DULCODOS universal mini Bedienungsanleitung

ProMinent

ProMinent DULCOTEST CGE 2-mA-10 ppm Bedienungsanleitung

ProMinent

ProMinent DulcoFlow DFMa Bedienungsanleitung

ProMinent

ProMinent DULCOMETER D1C A D Series Bedienungsanleitung

ProMinent

ProMinent DULCOMETER D2C Bedienungsanleitung

ProMinent

ProMinent Flow Control 3 Bedienungsanleitung

ProMinent

ProMinent DULCODOS Pool Comfort Bedienungsanleitung

ProMinent

ProMinent DULCOTEST PAA 1-mA-200 ppm Bedienungsanleitung

ProMinent

ProMinent DULCOMETER D1C Bedienungsanleitung

ProMinent

ProMinent DULCOMETER D1C Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung