Prorack K007 Bedienungsanleitung

FittingKit

K007

Fitting Instructions for Basic Carrier

Instrucciones de montaje para el

sistema de transporte.

Instructions de montage pour Basic

Carrier

x 4

x 1

Revision No:

FittingKit

K007

MAX kgs (lbs)

W/P

WHD

Honda

Accord , 4dr Sedan 85- 89

50 kgs (110 lbs)

Accord , 4dr Sedan Dec 85-Oct 89

50 kgs (110 lbs)

Accord , 4dr Sedan Jul 86-Jun 90

50 kgs (110 lbs)

Prelude , 3dr Coupe 83- 87

50 kgs (110 lbs)

Prelude , 3dr Coupe Feb 83-Sep 87

50 kgs (110 lbs)

Prelude , 3dr Coupe Mar 83-Sep 87

50 kgs (110 lbs)

FittingKit

K007

First Time Installation

Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

This kit fits type A, B, C and D.

These instructions show type A crossbar

fitted. They also apply to type B, C and D.

NOTE: Clamp images in these instructions may

not be representative of the clamps in this kit

FittingKit

K007

Use keys to remove covers.

Use hex screwdriver to reverse adjusting

screw 10 turns.

Press adjusting screw and pull crossbar legs

out. Refer to the crossbar instructions for

crossbar adjustment.

Ensure each end of the crossbar is adjusted

equally.

FittingKit

K007

Remove locking screw.

Cut protective strip in four equal lengths.

Apply protective strip as shown.

Trim if required.

Attach clamp to each leg. NOTE; clamps

may have labels showing their positions on

the vehicle (For example; "Front Right").

FittingKit

K007

Refit locking screw so that it goes through

the hole in the clamp. Do not begin to tighten

the locking screw.

Fit rubber pad (supplied with crossbar) to foot.

Make sure the pad fits into the holes

underneath the foot.

FittingKit

K007

Fitment

Place crossbar on vehicle. Minimum

recommended spacing between the bars is

700mm (27 1/2") (unless otherwise stated).

Adjust the legs on the crossbar so that they

are positioned equally from the ends of the

crossbar, and the clamps engage firmly on

the body work of the vehicle.

Tighten adjusting screw to 5 Nm (3.7 ft lb).

FittingKit

K007

Tighten locking screw on both legs evenly.

Check crossbar is securely attached to the

vehicle.

Use keys to fit and lock covers

FittingKit

K007

CAUTION: Recheck all fasteners immediately

after a load is applied to the crossbars.

Regularly check screws are tight.

FittingKit

K007

Maintenance

Clean the car roof and surfaces of the

product that will be in contact with the car

roof.

Follow the fitting instructions for fitting the

product to your vehicle. Make sure all steps

are carried out in order.

Set crossbars a minimum distance of 700mm

(27 1/2") apart where no other distance is

specified in the fitting instructions. This is

especially important when carrying long

loads.

Check unit is securely attached whenever

you refit it to the vehicle. If the unit feels

loose, refer to the fitting instructions and

readjust.

Some glass/panoramic roofs and radio

antennae may not be able to be used when

the product is fitted.

Do not modify this product.

Refer to the maximum permitted load

capacity specified in the fitting instructions.

Do not exceed the vehicle manufacturers

roof load rating if it is lower than the

maximum load capacity specified in the fitting

instructions.

Loads should not overhang the sides of the

product and be evenly distributed with the

lowest possible centre of gravity.

Long loads should be secured with non-

elastic straps to the front and rear of the

vehicle.

Objects with pointed ends (e.g. ski poles)

should be carried with the pointed ends to

the rear of the vehicle.

Remove all loose or removable objects from

the load prior to loading.

Make sure all loads are securely fastened

with non-elastic straps. Check regularly

during longer journeys.

Inhaltsverzeichnis

Sprachen:

Andere Prorack Autozubehör Handbücher

Prorack

Prorack K1255 Bedienungsanleitung

Prorack

Prorack K561 Bedienungsanleitung

Prorack

Prorack TP1 Bedienungsanleitung

Prorack

Prorack K869 Bedienungsanleitung

Prorack

Prorack K445 Bedienungsanleitung

Prorack

Prorack K1206 Bedienungsanleitung

Prorack

Prorack K585 Bedienungsanleitung

Prorack

Prorack PR3205 Bedienungsanleitung

Prorack

Prorack K997W Bedienungsanleitung

Prorack

Prorack K533 Bedienungsanleitung

Prorack

Prorack K866 Bedienungsanleitung

Prorack

Prorack K424 Bedienungsanleitung

Prorack

Prorack K077 Bedienungsanleitung

Prorack

Prorack K156 Bedienungsanleitung

Prorack

Prorack K674 Bedienungsanleitung

Prorack

Prorack K369 Bedienungsanleitung

Prorack

Prorack K188 Bedienungsanleitung

Prorack

Prorack K312 Bedienungsanleitung

Prorack

Prorack K301 Bedienungsanleitung

Prorack

Prorack K115 Bedienungsanleitung

Prorack

Prorack K1188 Bedienungsanleitung

Prorack

Prorack K549 Bedienungs- und Installationshandbuch

Prorack

Prorack K876 Bedienungsanleitung

Prorack

Prorack K513 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung