ProVisual DVRM-5004 Bedienungsanleitung
Provisual Mobile Digital Video Recorder
1 -
Mobile Digital Video Recorder
DVRM-5004
User’s Manual
Thank you for using our Mobile DVR. This manual is applicable for DVRM-5004. Please read
this User’s Manual carefully to ensure that you can use the device correctly and safely. The
contents of this manual are subject to be changed without notice.
Provisual Mobile Digital Video Recorder
2 -
Important notice:
1. Please read over all cautions.
2. Please keep this manual for reference in the future.
3. Please notice all warning information.
4. Please strictly follow the instructions in this manual while operating.
5. Please NEVER put this device under the place which is easily poured by water.
6. Please do NOT use abrasive chemicals, cleaning solvents or strong detergents to clean
the device. Wipe the device with a soft and dry cloth.
7. Please do NOT get the gate of airiness heat exchange closed.
8. Please leave the device far away from hot and high temperature environment.
9. Install the device with the accessories coming with it.
10. Please take care when moving the device, make sure of security, and avoid being
damaged by dropping from high place.
11. Call for qualified maintenance man to repair when needed.
12. The device can only be installed horizontally. Installed vertically or out of the horizontal
could hurt person or damage the device or/and its parts.
Warning
This device is NOT of waterproof; to prevent it from any accident of fire or electric
shock, please do NOT put any container with water on the device or nearby. Do not
expose the device to moisture, or extreme temperatures.
T
his li
g
htnin
g
flash with
arrow symbol within an
equilateral triangle is
intended to alert users
that there might be
uninsulated dangerous
voltage which may cause
electric shock to person
when the cover of device
is o
p
ened.
T
o prevent from the risk of
electric shock, do NOT
remove top cover or back
cover. There is NO
user-serviceable part inside.
Ask for service from qualified
maintenance man.
T
he exclamation point
within an equilateral
triangle is intended to alert
users the important
operating and
maintenance (servicing)
instructions in this manual.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Provisual Mobile Digital Video Recorder
3 -
1.Main Features..................................................................................................... 4
2. Overall description............................................................................................ 5
2.1 Front Panel .................................................................................................. 5
2.2 Rear panel ................................................................................................... 7
2.3 Remote........................................................................................................ 8
3. Using the recorder ............................................................................................ 9
Step 1, Install the Hard Drive into the Hard Drive case....................................... ...9
Step 2, Connect camera...................................................................................... 9
Step 3, Connect to power supply ........................................................................11
Step 4, format the SD card.................................................................................12
Step 5, Choose recording quality ........................................................................12
Step 6, start recording .......................................................................................13
4.Operations.........................................................................................................16
4.1 Play back the files on SD card.......................................................................16
4.2 Manage the power.......................................................................................20
5.Appendix, cables.............................................................................................255
5.1 Power supply.............................................................................................255
5.2 AV cables ..................................................................................................255
5.3 Signal cables .............................................................................................277
6. Specification...................................................................................................288
7. List of Standard Accessories............................................................................29
Provisual Mobile Digital Video Recorder
4 -
1. Main Features
Video and Audio
H.264 High Profile video compression, real time recording 25 fps (PAL) / 30 fps (NTSC)
for each channel. Frame rate adjustable for each channel.
AAC (Advanced Audio Compression) for audio.
D1 resolution for each channel, which means each channel supports
704x576 (PAL) - 704x480 (NTSC).
Support 4 channel video and 4 channel audio recording；
Power Input
Support from +8V DC to +32VDC. Applicable for vehicles with +12V or +24V battery.
When the power input connects in reverse polarity, the auto-protect function can
prevent the recorder and battery from damage.
The recorder provides each camera with stable +12V DC power; DVR can detect the
short cut on power circuit.
Can use ignition to control the power.
Recording mode
Continuous record.
Start recording automatically when the DVR is turned on.
Support schedule recording.
Support alarm recording.
Speed and Vehicle status recording
Record vehicle speed and car id with audio and video.
Support 6 sensors, can be connected to brake, return, right turn, left turn light etc.
Over-speed alarm.
SATA 2.5’’ Hard Drive and SD card for storage
Support S-ATA 2.5’’ Hard Drive and SD card for storage, external USB device (memory stick
or Hard Drive) is ok.
NOTE
If you remove the SD card while recording or playing, it might cause the damage of the file
on SD card. While recording or playing, the yellow light on the front panel will be on. So
please stop recording or playing until the yellow light is off if you need to remove the SD
card.
Multiple players supported
You can use the following player to play back the record file.
VLC media player（version1.0.0 or above）
Provisual Mobile Digital Video Recorder
5 -
Storm player (Version 2009 or above）
Winamp (Version 5.531 or above）
Windows Media Player (Need to download the H.264 control by network)
2. Overall description
High video quality based on H.264 profile compression.
High resolution recording, up to mega-pixel for 4 channel (1280 x 1024) and D1
resolution for 1 channel (PAL: 704 x 576 / NTSC: 720 x 480).
USB ports connect thumb drive / external HDD storage.
Compact size & lightweight, much easier for installation.
Support from 8VDC to 32VDC, applicable for 12VDC and 24VDC vehicles.
The recorder provides each camera with stable +12VDC power; DVR can detect the
short cut on power circuit.
Can use ignition to control the power. Configurable power timer after ignition is off.
Automatic, event trigger, schedule or motion recording options.
Can record speed with audio and video. Support over speed alarm.
Support 3 sensors, can record brake, return, right turn, left turn light status into the
record file.
External GPS allows for vehicle tracking and location with video and audio.
Use AVI format for record file. Compatible with different player software.
Support FAT32 file system, record file can be read directly on Windows, Linux.
Motion detection and the sensitivity can be adjusted.
Date and time stamp records onto footage.
2.1 Front Panel
①：Power light.
②：Run light.
③：Alarm light.
④：Recording media (SD or Hard Disk) Operation light.
⑤：System light.
⑥：Control panel or remote extension cord。
⑦：USB 2.0 port.
⑧：Network port. (RJ45)
Provisual Mobile Digital Video Recorder
6 -
Get to know the status of Mobile DVR by the
indication of PWR light and RUN light:
PWR RUN Description
Always On Blinking DVR is turned on and running.
Blinking with RUN by
turns
Blinking with PWR by
turns
Ignition is not enabled and DVR is
turned off.
Blinking together with
RUN
Blinking together with
PWR
Ignition is not enabled and DVR is
running. The DVR will be turned off
when it reached the “Ignition
Power Off Delay” time.
Blinking Off The DVR is turned off. It will restart if
POWER button is pressed on the
remote.
Alarm light (yellow) Description
On Alarm indication, such as over speed.
Off No alarm.
System light (yellow) Description
On In recording. Don’t remove the SD card in this status.
Please press “Stop” on the remote to stop recording if
you need remove the SD card. Removing SD card in this
status might cause the damage on the record file.
Off Recorder is not in recording mode. You can remove the
SD card.
Provisual Mobile Digital Video Recorder
7 -
2.2 Rear panel
①：AV input 1 (including audio input 1, video input 1 and power for camera 1)
②：AV input 2 (including audio input 1, video input 1 and power for camera 2)
③：AV input 3 (including audio input 1, video input 1 and power for camera 3)
④：AV input 4 (including audio input 1, video input 1 and power for camera 4)
⑤：AV output (including audio output, video output and power)
⑥：1 speed sensor, 3 sensors, 2 RS232 port, 1 RS485 port and one 5V DC output.
⑦：Power for the recorder and ACC input.
Provisual Mobile Digital Video Recorder
8 -
2.3 Remote
How to use the remote：
（1）Press <MENU> to enter main menu or sub menu. You can also use <MENU> to
select among different value in the submenu. You can also use <MENU> as <OK>.
（2）Press <Up/Down/Left/Right> button to move between the different menu item.
（3）Press <OK> to save and exit the current menu. Press <ESC> to cancel and exit the
current menu. If you modify something in the menu, recorder will prompt a window to ask
you to save or cancel your modification.
（4）Press <VIDEO> to toggle among different video channel.
（5）Press <AUDIO> to toggle among different audio channel.
（6）To delete character in the edit control, you can press <Left>.
（7）Press <POWER> for a while to turn on/off the recorder.
1. Power
2. Stop
3. Record
4. Alarm
5. Play
6. Numbers
7. Audio
8. Video
9. Up
10. Left
11. Right
12. Menu
13. ESC
14. OK
15. Down
16. Fast Forward
17. Pause/Step
18. Fast Backward
19. OSD
20. Next
21. Previous
Provisual Mobile Digital Video Recorder
9 -
3. Using the recorder
Step 1: Install the Hard Drive into the Hard Drive case
To install Hard Drive with S-ATA interface, please do as following steps.
1. Remove screws on the back side of the Hard Drive case.
2. Take the S-ATA connector out of the Hard Drive case.
3. Connect the connector with the Hard Drive.
4. Put the Hard Drive back to the Hard Drive case. Please note, the Hard Drive should be
Provisual Mobile Digital Video Recorder
10 -
put to the mounting bracket inside of the Hard Drive case.
5. Install the Hard Drive with mounting bracket though the holes on the Hard Drive case.
Please note, install the Hard Drive tightly. If not, the Hard Drive will be damaged due to the
vibration which might lead to the data loss.
6. Install the connector back to the back side of Hard Drive case. Then the S-ATA Hard
Drive is installed into the Hard Drive case.
Inhaltsverzeichnis
Andere ProVisual DVR Handbücher
