Qlight SH1S Bedienungsanleitung

SH1S / SH1TS / SH2S / SH2TS

Thank you for purchasing Q.Light product. Please read this

manual carefully before installing this product for safe and long

use.

▪Taking Xenon lamp with AL housing of Long durability.

▪Suitable for a bright place and a signal transfer for a long

distance with a strong strobe signal light.

▪Easy to change its lamp by taking a connector type lamp.

▪Material: Filter-PC, Body- DIECAST AL,

Protection cage-SUS316L

▪Flashes(Flashing Type): 60-80/Min.

▪Protection Class : IP56

1) SH1S / SH1TS

▪

General Specification

Model

Rated

Voltage

Current

Weight

Flashes

Color

SH1S

SH1TS

(add

terminal

box)

DC12V

0.722A

1.13Kg

60~80/min.

RED-R

AMBER-A

GREEN-G

BLUE-B

DC24V

0.388A

1.13Kg

AC110V

0.133A

1.11Kg

AC220V

0.106A

1.11Kg

* Upper weight is SH1S’s weight which is not added the protection

cage(0.25kg) and the terminal box(0.46kg).

▪External View Drawing

SH1S SH1TS

2) SH2S/SH2TS

▪

General Specification

Model

Rated

Voltage

Current

Weight

Flashes

Color

SH2S

SH2TS

(add

terminal

box)

DC12V

0.722A

1.21Kg

60-80/min.

RED-R

AMBER-A

GREEN-G

BLUE-B

DC24V

0.388A

1.21Kg

AC110V

0.133A

1.19Kg

AC220V

0.106A

1.19Kg

* Upper weight is SH2S’s weight which is not added the protection

cage(0.29kg) and the terminal box(0.46kg).

▪External View Drawing

SH2S SH2TS

This product has a terminal port for connecting power line in its

body(SH1S/SH2S) or terminal box(SH1TS/SH2TS).

SH1S/SH2S SH1TS/SH2TS

1) SH1S/ SH2S

▪Release the protection cage bolts(M4-4EA)①and take off the

lens ring(protection cage)②and lens③.

▪Release the assembling board bolts(M4-3EA) ④and take off

the board⑤then check terminal port⑥.

2) SH1TS / SH2TS

Release terminal port cover bolts(M4-4EA)⑦and take off

terminal port cover⑧then check terminal port⑥.

OPERATING MANUAL

Heavy duty Strobe Light

3) Connect power line

▪In case of product using AC voltage, connect the line without

Polarity(wire color).

▪In case of product using DC voltage, black line is negative(-).

4) the end of line

▪Please use the “O”or “U”shaped terminal for the end of line

for a safety use.

5) Line entry

Please use cable entry⑨with water-proof

connector(SH1S/SH2S-flexible connector#16, SH1TS/SH2TS-

15C nipple is supplied as a standard) or cable grand to keep

airtight.

▪This product was manufactured with anti-dust and water proof

structure for outdoor use. Mount at the place where exist low

vibration, low impact, low moisture and low dust on the vertical

standing direction.

▪Please make a hole by a drill where you need to attach our

product and refer to below picture for a hole size. (Make sure PCD

from external view drawing.)

▪Fix the product by using another nuts(M8-3EA).

1) ※Warning!

Must turn off power supply and change bulb after 1 minute at

least.

▪Xenon lamp work with a high voltage, if you touch a

assembling board or lamp without power-off, you may receive

an electric shock.

2) Lens Removal

Release the bolts①and take off the lens from the body.

3) Change Lamp

▪Our company’s xenon lamp (1) is made as a connector type

lamp. If you pull out with a small strength, it can be separated

easily.

▪Please fit the lamp by checking a connector pin location (2) as

below picture.

Lamp removal Lamp fitting

4) Lens Assembling

Assemble the product in reverse order of separating.

▪This is designed for explosion proof and water proof/dust proof

product. When releasing the product for checking, connecting etc,

must keep airtight by making sure bolts.

▪Use explosion-proof cable grand to keep airtight which is

satisfied with explosion-proof regulation. If the line entry is not

kept airtight and put outdoor, this can cause a product damage by

moisture and dust.

▪If using voltage is seriously higher or lower than rated voltage, it

can reduce the self-life of the product or can cause a problem

on product operating. Make sure the using voltage does not

exceed +/-5% of the rated voltage.

▪If lens or body of the product is contaminated by chemicals such

as thinner, benzene, the product can be damaged, discolored

or deformed. Please be careful.

▪Do not give strong impact to the product. It can be a reason of

wire disconnection or short circuit.

Situation

Main reason

Solution

Lamp non-working

Damage on Lamp

Change Lamp

Lamp connector

badness

re-connecting Lamp

connector

No Power Supply

Making Sure Power

Supply

Strobe working

irregularly.

Supplying Voltage

Lower than Rated

Voltage

Making Sure Using

Voltage

Wrong Operating L/LF

Selection Switch

Convert L/LF Selection

Switch

Change Lamp

Trouble shooting

Q-LIGHT CO., LTD.

http://www.qlightkr.com

E-mail : qlightk[email protected]

Overseas Marketing Team /Plant

Tel) 055-328-4082Fax)055-328-4083

178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,

KyungNam, Korea

Dieses Handbuch passt für folgende Modelle

Andere Qlight Beleuchtungsausrüstung Handbücher

Qlight

Qlight SAOL1 Bedienungsanleitung

Qlight

Qlight SSEL Bedienungsanleitung

Qlight

Qlight QTR50L Bedienungsanleitung

Qlight

Qlight MTG60 Series Bedienungsanleitung

Qlight

Qlight S150R Bedienungsanleitung

Qlight

Qlight STA35SL Series Bedienungsanleitung

Qlight

Qlight S100E Bedienungsanleitung

Qlight

Qlight S50B Bedienungsanleitung

Qlight

Qlight ST45ML-NEC Bedienungsanleitung

Qlight

Qlight S100S Bedienungsanleitung

Qlight

Qlight SESA Bedienungsanleitung

Qlight

Qlight SK Bedienungsanleitung

Qlight

Qlight S60LR Bedienungsanleitung

Qlight

Qlight Microlectra QTG50 Bedienungsanleitung

Qlight

Qlight S80ADR Bedienungsanleitung

Qlight

Qlight S80L Bedienungsanleitung

Qlight

Qlight S80L Bedienungsanleitung

Qlight

Qlight SHDL Bedienungsanleitung

Qlight

Qlight SHD Bedienungsanleitung

Qlight

Qlight QWSL150 Bedienungsanleitung

Qlight

Qlight S100M Bedienungsanleitung

Qlight

Qlight QT56MCL Bedienungsanleitung

Qlight

Qlight S80AR Bedienungsanleitung

Qlight

Qlight CPK-CAN Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung