Quantum DXi4700 Installations- und Betriebshandbuch

6-68107-03 Rev C, December 2016 *6-68107-03 C*

Quantum DXi4700 Capacity

Upgrade Guide

Introduction 3

Preparing for the Capacity Upgrade 4

Software Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Checking System Health . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Gathering Necessary Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Taking ESD Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Capacity Upgrade Overview 6

Capacity Upgrade Major Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Determining the DXi4700 Model 7

Unpacking the Upgrade Components 9

Unpacking the Additional Node Components . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Unpacking the DXi4700 Expansion Module . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Shutting Down the System 12

Installing Components in the Node 13

Installing the Node Hard Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Opening the Node Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing the Memory Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing the H810/H830 RAID Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Closing the Node Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

2Contents

Made in the USA. Quantum Corporation provides this publication “as is” without warranty of any kind, either express or

implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum

Corporation may revise this publication from time to time without notice.

or adaptations without prior written authorization of Quantum Corporation is prohibited by law and constitutes a

punishable violation of the law.

TRADEMARK STATEMENT

Quantum, the Quantum Logo, Backup. Recovery. Archive. It's What We Do., Be Certain, Be Quantum Certain, DLT, the DLT

Logo, DLTSage, DLTtape, the DLTtape Logo, DXi, DXi Accent, Dynamic Powerdown, FastSense, FlexLink, GoProtect, GoVault,

iLayer, Lattus, MediaShield, Optyon, Pocket-sized., Well-armored., Preserving the World's Most Important Data. Yours., Q-

Cloud, Quantum Certain, Quantum Certainty, Quantum vmPRO, Scalar, SDLT, SiteCare, SmartVerify, StorageCare, StorNext,

Super DLTtape, SuperLoader, and Vision are either registered trademarks or trademarks of Quantum Corporation and its

affiliates in the United States and/or other countries. All other trademarks are the property of their respective owners.

Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their

respective companies. All other brand names or trademarks are the property of their respective owners. Quantum

specifications are subject to change.

Installing Expansion Modules 28

Determining the Order of the Components in the Rack . . . . . . . . . . . . . . . . . 28

Locating the Mounting Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Installing the DXi4700 Expansion Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cabling the System 32

Turning On the System 37

Installing the Storage Capacity License 38

Troubleshooting 41

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

Introduction 3

Introduction

This document provides instructions for upgrading the storage capacity of a

Quantum DXi4700 disk backup system. There are two methods for upgrading

storage capacity:

•Adding a Storage Capacity License - Upgrade the usable capacity of the

system by adding license keys (6TB, 8TB, and 18TB) to enable hardware

capacity that is already installed in the system. For example, you can

upgrade the usable capacity of a 5 TB system to 11 TB simply by adding a

storage capacity license key. See Ta ble 1 for the licensed usable capacities

that are available for each hardware configuration.

•Adding Additional Hardware Capacity - Upgrade the usable capacity of

the system by installing additional hardware capacity along with a storage

capacity license key. See Tab le 1 for supported configurations.

• Upgrade the base Node with 6 additional hard drives for a total of 12

hard drives (4 TB each).

• Add up to three Expansion modules (JBODs) to the system. Each

Expansion module contains 12 hard drives (4 TB each).

Note: You

must

upgrade the Node to a total of 12 hard drives before

adding Expansion modules to the system.

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

4Preparing for the Capacity Upgrade

Table 1 DXi4700 Supported

Configurations

Preparing for the Capacity Upgrade

WARNING: To prevent the risk of electrical shock, bodily injury, or damage to

the equipment, read all instructions and warnings in the

Quantum Products System, Safety, and Regulatory Information

Guide

that shipped with your system. The guide is also available

at: http://quantum.com/cssp

Before you begin the DXi4700 storage capacity upgrade, make the following

preparations:

•Software Upgrades

•Checking System Health

•Gathering Necessary Tools

•Taking ESD Precautions

Configuration

Nominal

Capacity*

Licensed

Usable

Capacity

System

Memory

Expansion

Modules

(JBODs)

To t a l R a c k

Space

Required

DXi4700 (NAS/VTL/Multi-Protocol)

•1Node

• 3 x 1 GbE Ethernet ports

• 2 x 8 Gb Fibre Channel ports for

VTL (VTL and Multi-Protocol

configurations only)

• 2 x 8 Gb Fibre Channel ports for

PTT (Multi-Protocol configurations

only)

• 2 x 6 Gb SAS ports (DXi4700 G1

configurations with Expansion

modules only)

• 2 x 12 Gb SAS ports (DXi4700 G2

configurations with Expansion

modules only)

• (Optional) Additional network

adapter providing 2 x 10 GbE

(SFP+) Ethernet ports or 2 x 10

GBase-T Ethernet ports.

12 TB 5 TB /

11 TB

32 GB 02U

28 TB 19 TB /

27 TB

32 GB 02U

64 TB 45 TB /

63 TB

64 GB 14U

100 TB 81 TB /

99 TB

64 GB 26U

136 TB 117 TB /

135 TB

96 GB 38U

* 1 TB = 1,000,000,000,000 bytes

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

Preparing for the Capacity Upgrade 5

Software Upgrades It is highly recommended that you upgrade to the latest version of DXi Software

before starting a capacity upgrade. For more information on software upgrades,

see the “Software Upgrades” section of the

DXi4700 User’s Guide

(6-68106).

Checking System Health Make sure the following conditions are met before you continue with the

capacity upgrade:

• All backup jobs are completed and there is no pending I/O.

• All replication jobs are completed, and replication is paused (Replication >

Actions page).

• All space reclamation tasks are completed without errors (Utilities > Space

Reclamation page).

• All healthchecks are completed without errors (Utilities > Space

Reclamation page).

• All components in the system display Normal status (Status > Hardware

page).

• All outstanding administration alerts are deleted (Alerts > Admin Alerts

page).

• All service tickets are closed (Alerts > Service Tickets page).

For more information, see the

DXi4700 User’s Guide

(6-68106), or click Help >

Help Contents in the remote management console to display the DXi online

help.

Gathering Necessary

Tools

The following tools are required for the storage capacity upgrade:

• Small flat head screwdriver

Taking ESD Precautions Some components within the DXi4700 system contain static-sensitive parts. To

avoid damaging these parts while performing installation procedures, always

observe the following precautions:

• Keep static-sensitive parts in their original shipping containers until ready

for installation.

• Do not place static-sensitive parts on a metal surface. Place them inside their

protective shipping bag or on an antistatic mat.

• Wear anti-static wrist bands when unpacking and handling the units, and

avoid touching connectors and other components.

Note: Dry climates and cold-weather heating environments have lower

relative humidity and are more likely to produce static electricity.

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

6Capacity Upgrade Overview

Capacity Upgrade Overview

To upgrade the usable capacity of the DXi4700 by enabling hardware capacity

that is already installed in the system, simply enter the storage capacity license

keys (6TB, 8TB, and 18TB). Skip directly to Installing the Storage Capacity License

on page 38.

To upgrade the usable capacity of the DXi4700 by installing additional hardware

capacity, you need to install one or more components. The components you

need to install depend on the initial usable capacity and the total usable

capacity after the upgrade (see Ta b l e 2 ):

• Node hard drives (4 TB each) (6)

• Memory modules (4 GB DIMMs) (8 or 16)

• H810 RAID controller card (DXi4700 G1)

• H830 RAID Controller (DXi4700 G2) (1)

• Expansion Modules (JBODS) (1 to 3)

Capacity Upgrade

Major Steps

To perform the hardware capacity upgrade, complete the following major steps

in order:

1Determining the DXi4700 Model on page 7

2Unpacking the Upgrade Components on page 9

3Shutting Down the System on page 12

4Installing Components in the Node on page 13

5Installing Expansion Modules on page 28

6Cabling the System on page 32

7Turning On the System on page 37

8Installing the Storage Capacity License on page 38

Note: If you encounter problems while performing the capacity upgrade, see

Troubleshooting on page 41.

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

Determining the DXi4700 Model 7

Table 2 DXi4700 Hardware

Capacity Upgrades

Determining the DXi4700 Model

Before starting a capacity upgrade, you will need to determine if the DXi system

is a DXi4700 G1 or DXi4700 G2. The DXi4700 model information is located on

the pull-out information tag on the front of the Node (see Figure 1). T

• The DXi4700 G2 information tag does not include “G1” in the part number

(see Figure 2).

• The DXi4700 G1 information tag does include “G2” in the part number (see

Figure 3).

Capacity After Upgrade

Components to Add to the System

11 TB 19 TB /

27 TB

45 TB /

63 TB

81 TB /

99 TB

117 TB /

135 TB

Capacity Before Upgrade

5 TB /

11 TB

License Key 6 Node drives

License Key

6 Node drives

8 DIMMs

1 RAID Card

1 JBOD

License Key

6 Node drives

8 DIMMs

1 RAID Card

2 JBODs

License Key

6 Node drives

16 DIMMs

1 RAID Card

3 JBODs

License Key

19 TB /

27 TB

-- License Key 8 DIMMs

1 RAID Card

1 JBOD

License Key

8 DIMMs

1 RAID Card

2 JBODs

License Key

16 DIMMs

1 RAID Card

3 JBODs

License Key

45 TB /

63 TB

-- -- License Key 1 JBOD

License Key

8 DIMMs

2 JBODs

License Key

81 TB /

99 TB

-- -- -- License Key 8 DIMMs

1 JBOD

License Key

117 TB -- -- -- -- License Key

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

8Determining the DXi4700 Model

Figure 1 DXi4700 Information

Ta g

Figure 2 DXi4700 G2

Information Tag

Figure 3 DXi4700 G1

Information Tag

Pull out information tag to view

system part number

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

Unpacking the Upgrade Components 9

Unpacking the Upgrade Components

Depending on the hardware capacity upgrade you are performing, the

necessary components ship in one or more boxes. Each box includes a label that

notes the number of the box and the total number of boxes in the shipment (for

example, box 1 of 3). MAKE SURE THAT YOU HAVE ALL BOXES IN THE

SHIPMENT BEFORE YOU BEGIN THE UPGRADE.

To unpack the upgrade components, refer to the following sections:

•Unpacking the Additional Node Components on page 9

•Unpacking the DXi4700 Expansion Module on page 10

Note: Make sure to retain all packing materials, as well as the documentation

and other items included in the shipping box. The packaging materials

must

be used if the system is relocated.

WARNING: The DXi4700 G1 Node and Expansion module (JBOD) weigh 61.0

pounds (27.7 kg) and 62.6 pounds (28.4 kg) respectively. The

DXi4700 G2 Node and Expansion module (JBOD) weigh 49.4

pounds (22.4 kg) and 59.2 pounds (26.8 kg) respectively. A

minimum of two people are required to lift either chassis.

Unpacking the

Additional Node

Components

Depending on the upgrade, additional Node components may ship in separate

boxes (see Capacity Upgrade Overview on page 6):

• Node hard drives (4 TB each) (6)

• Memory modules (4 GB DIMMs) (8 or 16)

• H810 RAID controller card (DXi4700 G1) (1)

• H830 RAID controller card (DXi4700 G2) (1)

Carefully unpack and remove the components from the packing materials (see

Figure 3).

Quantum DXi4700 Capacity Upgrade Guide

6-68107-03 Rev C

December 2016

10 Unpacking the Upgrade Components

Figure 4 Unpacking the

Additional DXi4700 Node

Components

Unpacking the DXi4700

Expansion Module

Depending on the upgrade, 1–3 Expansion modules (JBODs) may ship in

separate boxes (see Capacity Upgrade Overview on page 6). The box containing

each DXi4700 Expansion module contains the following items:

• Rack mount rails

• Cable management straps

• Accessory kit, which includes the following:

• C13 to C14 power cord (2)

• North American power cord (2)

• SAS interconnect cable (1m) (2)

• Expansion module bezel and bezel key (secured with tape inside bezel)

For each Expansion module (if any), carefully unpack and remove the

components from the packing materials (see Figure 5).

4 TB Hard Drive 4 GB Memory Module

H810 RAID Controller (DXi4700 G1)

X520 10 GbE Card

X540 10 GBase-T Card

H830 RAID Controller (DXi4700 G2)

Andere Handbücher für DXi4700

Inhaltsverzeichnis

Andere Quantum Lagerung Handbücher

Quantum

Quantum QDFLD25-***MUH1I Series Bedienungsanleitung

Quantum

Quantum StorNext QM1200 Bedienungsanleitung

Quantum

Quantum P2000 Series Bedienungsanleitung

Quantum

Quantum Scalar i80 Bedienungsanleitung

Quantum

Quantum PX500 Series Bedienungsanleitung

Quantum

Quantum PX500 Series Bedienungsanleitung

Quantum

Quantum Maxtor Fireball CR Bedienungsanleitung

Quantum

Quantum DXi7500 Technisches Handbuch

Quantum

Quantum Scalar i500 Anleitung zur Verwendung

Quantum

Quantum P3000 Series Bedienungsanleitung

Quantum

Quantum ATL M2500 Bedienungsanleitung

Quantum

Quantum LTO 3 Bedienungsanleitung

Quantum

Quantum Scalar 50 Bedienungsanleitung

Quantum

Quantum PX500 Series Kurzanleitung

Quantum

Quantum DXi8500 Bedienungsanleitung

Quantum

Quantum DXi6900-S Bedienungsanleitung

Quantum

Quantum DLT 4700 Bedienungsanleitung

Quantum

Quantum RDX 8000 Bedienungsanleitung

Quantum

Quantum Scalar LTFS Gebrauchs- und Pflegehandbuch

Quantum

Quantum DXi6701 Technisches Handbuch

Quantum

Quantum Scalar i2000 Bedienungsanleitung

Quantum

Quantum Scalar 1000 Handbuch

Quantum

Quantum LTO 1U Bedienungsanleitung

Quantum

Quantum Scalar 50 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung