Quantum Scalar LTFS Gebrauchs- und Pflegehandbuch

6-68095-01 Rev A, December 2013 *6-68095-01 A*

Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates

in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum

specifications are subject to change.

Quantum Scalar LTFS

Appliance:

Power Supply Replacement

The Scalar Linear Tape File System (LTFS) Appliance is powered by two

redundant, “hot-swappable” power supplies located in the back of the unit.

Once the failed power supply is identified, the power supply can be easily

replaced and the Scalar LTFS Appliance returned to normal operation. Always

replace faulty power supplies to ensure redundant operation.

To replace the power supply, refer to the following sections:

•Preparing to Replace a Power Supply on page 2

•Removing a Failed Power Supply on page 3

•Replacing a Failed Power Supply on page 3

Quantum Scalar LTFS Appliance: Power Supply Replacement

6-68095-01 Rev A

December 2013

2 Preparing to Replace a Power Supply

Preparing to Replace a Power Supply

Before beginning the replacement procedure, make sure that you have the

required replacement kit(s). Refer to the following table for the replacement kit

contents (see Table 1)

Table 1 Scalar LTFS Appliance

Power Supply Kit Illustration Description Qty

Replacement power

supply (570 watt)

Required Tools: None

Quantum Scalar LTFS Appliance: Power Supply Replacement

6-68095-01 Rev A

December 2013

Removing a Failed Power Supply 3

Removing a Failed Power Supply

To remove the failed power supply, complete the following steps:

1Look at the LED indicators on the power supply: when an amber LED is

displayed or the LED is OFF, that power supply has failed (see Figure 1).

2When disconnecting the power cable, remove the cable from the strap.

3Remove the power supply cable from the failed power supply.

4Press the release latch and use the power supply handle to help remove the

power supply from the Scalar LTFS Appliance.

Caution: The power supply may be hot. Use caution when removing the

failed power supply.

Figure 1 Remove the Scalar

LTFS Appliance Power Supply

Connector Power

Supply

Release

Latch

Power

Supply

Handle

Status LED

(Step 1) Velcro strap

(Step2)

(Step 4)

Replacing a Failed Power Supply

To replace the power supply, complete the following steps:

1In the empty bay of the Scalar LTFS Appliance, insert the replacement power

supply until the release latch snaps into place.

2Reattach the power cable to the power supply.

Quantum Scalar LTFS Appliance: Power Supply Replacement

6-68095-01 Rev A

December 2013

4Replacing a Failed Power Supply

3To ensure that the power supply is working properly, check the power

supply’s LED indicators.

A green light indicates that a valid AC source is connected to the power

supply, and that the power supply is operational. When Scalar LTFS

Appliance is on, a green light also indicates that the power supply is

providing DC power to the appliance.

4When connecting the power cable, secure the cable with the strap.

Inhaltsverzeichnis

Andere Quantum Lagerung Handbücher

Quantum

Quantum Superloader 3 Handbuch

Quantum

Quantum DLT-V4 Bedienungsanleitung

Quantum

Quantum ATL M-Series Bedienungsanleitung

Quantum

Quantum Quantum Bigfoot CY Bedienungsanleitung

Quantum

Quantum ValueLoader DLT VS80 Betriebsanleitung

Quantum

Quantum DLT-V4 Bedienungsanleitung

Quantum

Quantum DLTtape SDLT 220 Bedienungsanleitung

Quantum

Quantum Atlas V Bedienungsanleitung

Quantum

Quantum DLTtape DLT 4000 Bedienungsanleitung

Quantum

Quantum LTO3 A-Series Bedienungsanleitung

Quantum

Quantum Scalar 100 Bedienungsanleitung

Quantum

Quantum DXi6902 Kurzanleitung

Quantum

Quantum Atlas II Service-Handbuch

Quantum

Quantum StorNext QM1200 Bedienungsanleitung

Quantum

Quantum Scalar 24 Bedienungsanleitung

Quantum

Quantum Q2000 Bedienungsanleitung

Quantum

Quantum FastStor 1 Bedienungsanleitung

Quantum

Quantum Scalar 218FC Bedienungsanleitung

Quantum

Quantum P1000 Series Bedienungsanleitung

Quantum

Quantum Maxtor Fireball lct10 Bedienungsanleitung

Quantum

Quantum SuperLoader DLT Bedienungsanleitung

Quantum

Quantum StorNext QD7000 Bedienungsanleitung

Quantum

Quantum Scalar i80 Bedienungsanleitung

Quantum

Quantum Scalar i40 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung