Radio Shack ET-686 Bedienungsanleitung

Cat. No. 43-686

OWNER’S MANUAL

Please read before using this equipment.

2-Line 900 MHz Cordless

Speakerphone

ET-686

43-686.fm Page 1 Friday, September 10, 1999 3:13 PM

FEATURES

Your RadioShack ET-686 2-Line 900-

MHz Cordless Speakerphone uses ad-

vanced cordless telephone technology

to give you superior audio quality and

extended range. The ET-686 lets you

make and receive calls on two separate

telephone lines. Its features include:

900 MHz Operation — provides longer

range and less interference than many

other cordless phones.

Two-Line Telephone System — lets

you easily handle two telephone lines at

the same time. You can use both lines to

make 3- or 4-way conference calls, or

one line for data communication while

you are talking on the other.

Dual Keypads — a full set of keys on

both the ET-686’s handset and base let

you use either keypad to make and an-

swer calls or use the phone’s features.

Speakerphone — lets you make or an-

swer calls without using the handset.

Ample Talk and Standby Time — the

supplied battery pack provides 7 hours

of continuous talk time or 7 days of

standby time (when fully charged).

20-Number Memory Dialing — lets you

store up to 20 numbers in memory (10

each in the handset and base) for easy

dialing.

Paging/Two-Way Intercom System —

lets you send a signal from the base to

the handset, or from the handset to the

base, to page someone or locate the

handset when it is away from the base.

If someone answers, you can use the

ET- 686 as an intercom.

Volume Controls – let you adjust the

volume you hear through the handset

and speakerphone.

Adjustable Ringer — lets you choose

high or low volume for each line’s ringer

on the handset, or turn the base’s ringer

off.

Wall Mountable — you can mount the

ET-686 on the wall to save space on

your desk top.

Headset Jack — lets you make or an-

swer calls with hands-free convenience

using an optional headset.

Facedown or Faceup Handset Charg-

ing — you can place the handset on the

base facedown or faceup.

40 Channels — automatically selects a

clear channel when you make or answer

a call.

Security Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

RadioShack is a registered trademark used by Tandy Corporation.

43-686.fm Page 2 Friday, September 10, 1999 3:13 PM

Line Status Indicators — show if a line

is available, in use, or on hold.

Auto Talk — lets you set the ET-686 so

you can answer a call by lifting the hand-

set from the base.

Any Key Answer — lets you set the ET-

686 so you can press any key to answer

a call on the base or on the handset

when it is away from the base.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Tone/Pulse Dialing — lets you use

your phone with either type of service,

and you can easily switch from pulse to

tone dialing for long-distance, bank-by-

phone, or other special services.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number: ___________________

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-686.fm Page 3 Friday, September 10, 1999 3:13 PM

Important:

• Cordless phones such as this one

require AC power to operate. When

the AC power is off, you cannot dial

out or receive incoming calls using

your ET-686. To be safe, you should

also have a phone that does not

need AC power to operate (not a

cordless phone) so you can still

make and receive calls if there is an

AC power failure.

• When AC power is lost, the ET-686

loses the security access-protection

code connection between the base

and the handset. When power is

restored, put the handset on the

base briefly to restore this connec-

tion so you can use the handset.

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you can

connect it to most phone lines. However,

each device that you connect to the tele-

phone line draws power from the line.

We refer to this power draw as the

phone's ringer equivalence number, or

REN. The REN is on the bottom of your

phone.

If you use more than one phone or other

device on the line, add up all the RENs.

If the total is more than five (three in ru-

ral areas), your phones might not ring. If

ringer operation is impaired, remove one

of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

This equipment complies with the limits

for a Class B digital device as specified

in Part 15 of

FCC Rules

. These limits

provide reasonable protection against

radio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures.

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the

radio or TV.

Consult your local RadioShack store if

the problem still exists.

43-686.fm Page 4 Friday, September 10, 1999 3:13 PM

CONTENTS

Installation ............................................................................................................... 6

Mounting the Phone ........................................................................................... 6

Connecting to the Phone Lines .................................................................... 6

On a Desk Top ............................................................................................. 6

On a Wall or Wall Plate ................................................................................ 7

Connecting and Charging the Battery Pack ..................................................... 10

Setting the Dialing Mode .................................................................................. 11

Adjusting the Ringer ......................................................................................... 12

On the Handset .......................................................................................... 12

On the Base ............................................................................................... 12

Operation ............................................................................................................... 13

Using the Handset ............................................................................................ 13

Making a Call ............................................................................................. 13

Answering a Call ........................................................................................ 13

Setting the Handset Volume ...................................................................... 13

Changing the Channel ............................................................................... 13

Using the Speakerphone .................................................................................. 14

Making a Call ............................................................................................. 14

Answering a Call ........................................................................................ 14

Adjusting the Speakerphone Volume ......................................................... 14

Using Mute ................................................................................................. 15

Using Hold ........................................................................................................ 15

Switching Between the Handset and Speakerphone ....................................... 15

Using Both the Handset and Speakerphone .................................................... 16

Making a Conference Call ................................................................................ 16

3-Way Conferencing .................................................................................. 16

4-Way Conferencing .................................................................................. 16

Using the ET-686 with Extension Phones ........................................................ 17

Using Redial ..................................................................................................... 17

Using Flash ...................................................................................................... 18

Using Tone Services on a Pulse Line ............................................................... 18

Using the Paging/Intercom Features ................................................................ 18

Memory Dialing ................................................................................................ 19

Storing a Number in Memory ..................................................................... 19

Entering a Pause ....................................................................................... 20

Dialing a Memory Number ......................................................................... 20

Chain-Dialing Service Numbers ................................................................. 20

Testing Stored Emergency Numbers ......................................................... 20

Using a Headset ............................................................................................... 21

Troubleshooting .................................................................................................... 22

Care and Maintenance .......................................................................................... 24

43-686.fm Page 5 Friday, September 10, 1999 3:13 PM

INSTALLATION

MOUNTING THE PHONE

You can place the ET–686’s base on a

desk or table, or mount it on a standard

wall plate or directly on a wall. Choose a

location that is:

• near an accessible AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Connecting to the Phone Lines

To take full advantage of the ET-686’s

capabilities, you must have two phone

lines with separate phone numbers. If

you have only one line, you can order a

second from your phone company.

You can connect the ET-686 to the lines

in one of these ways:

• connect two lines through a two-line

modular phone jack

• connect two lines through two one-

line modular phone jacks

• connect one line through a one-line

modular phone jack

Notes:

• Your phone connects directly to a

modular phone line jack. If your

phone wiring does not have a modu-

lar jack, you can update it using

jacks and adapters available at your

local RadioShack store. Or, you can

have the phone company update it

for you.

• The line that connects a two-line

phone jack to the phone company

wiring must be twisted-pair cable.

Otherwise, you might hear interfer-

ence (crosstalk) between the two

lines.

• The USOC number of the two-line

jack to be installed is RJ14C

(RJ14W for a wall-plate). The USOC

number of a single-line jack is

RJ11C.

Caution: The supplied RadioShack

adapter was designed specifically for

your ET-686. Use only the supplied

adapter.

On a Desk Top

1. To connect the phone to a two-line

phone jack, plug one end of the sup-

plied long two-line modular cord into

the TEL LINE 1/2 jack on the back of

the phone.

43-686.fm Page 6 Friday, September 10, 1999 3:13 PM

Note: If you connect the phone to a

two-line phone jack with a two-line

cord, do not connect a cord to the

TEL LINE 2 jack or the phone will not

operate properly. Instead, you can

connect another phone device, such

as a fax machine or modem.

To connect the phone to two one-

line phone jacks, plug one end of

the supplied long two-line modular

cord into TEL LINE 1/2 and plug

another cord (not supplied) into the

TEL LINE 2 jack.

To connect the phone to a single

one-line phone jack, plug one end of

the supplied long modular cord into

the TEL LINE 1/2 or TEL LINE 2 jack.

Note: If you connect the phone to a

single one-line phone jack, do not

press the unused line button or you

might hear feedback.

2. Plug the supplied AC adapter’s bar-

rel plug into the DC IN 9V jack on the

back of the base.

3. Route the adapter’s cord through

the strain relief slot on the bottom of

the bracket.

4. Plug the adapter into a standard AC

outlet.

5. Connect the phone cord(s) to the

modular phone line jack(s).

6. Raise the base’s antenna to a verti-

cal position.

On a Wall or Wall Plate

Note: To mount the base directly on the

wall, you need two screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the bracket. Drill two

holes 315/16 inches apart. Then thread a

screw into each hole, letting the heads

extend about 5/16 inch from the wall.

43-686.fm Page 7 Friday, September 10, 1999 3:13 PM

1. Insert the two tabs at the top of the

narrow end of the supplied bracket

into the base’s upper tab slots as

shown, then press down on the

bracket’s latches and insert them

into the clip slots.

2. To connect the phone to a two-line

phone jack, plug one end of the sup-

plied long modular cord into the TEL

LINE 1/2 jack on the back of the

phone.

Note: If you connect the phone to a

two-line phone jack with a two-line

cord, do not connect another (third)

phone line to the TEL LINE 2 jack or

the phone will not operate properly.

Instead, you can connect another

phone device such as a fax machine

or modem.

To connect the phone to two one-

line phone jacks, plug one end of

the supplied short two-line modular

cord into TEL LINE 1/2 and plug

another cord (not supplied) into the

TEL LINE 2 jack.

To connect the phone to a single

one-line phone jack, plug one end of

the supplied long modular cord into

the TEL LINE 1/2 or TEL LINE 2 jack.

Note: If you connect the phone to a

single one-line phone jack, do not

press the unused line button or you

might hear feedback.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

43-686.fm Page 8 Friday, September 10, 1999 3:13 PM

4. Route the adapter’s cord through

the narrow groove on the bracket.

If you are using two phone cords,

route the second cord through one

of the wide grooves on the bracket.

To mount the phone on a wall plate,

plug the other end of the short mod-

ular cord into the wall plate jack,

then align the bracket’s keyhole

slots with the wall plate studs and

slide the base downward to secure

it. If you are using two phone cords,

plug the second cord into the sec-

ond phone jack.

To mount the phone directly on a

wall,

align the bracket’s keyhole

slots with the mounted screws and

slide the base downward to secure

it. Connect the phone cord(s) to the

modular phone line jack(s).

6. Plug the adapter into a standard AC

outlet.

43-686.fm Page 9 Friday, September 10, 1999 3:13 PM

7. Press and lift out the handset

holder, flip it over as shown, then

snap it back into place.

8. Raise the base’s antenna to a verti-

cal position.

CONNECTING AND

CHARGINGTHEBATTERY

PACK

The ET-686 comes with a rechargeable

nickel-cadmium battery pack in the

handset but not connected. Before using

your phone, you must connect the bat-

tery pack, then charge it for about 24

hours.

1. Slide open the battery compartment

cover and lift the battery pack out of

the compartment.

2. Plug the battery pack’s connector

into the socket in the compartment.

The connector fits only one way.

3. Replace the battery pack and the

cover.

Recharge the battery pack when the

handset beeps every 3 seconds or its

line indicators flash every 3 seconds.

To charge the battery pack, place the

handset either faceup or facedown on

the base. The CHARGE indicator on the

base lights.

Important: Be sure the battery pack is

properly connected before you try to

charge it. The CHARGE indicator lights

whenever the handset is on the base,

even if the battery pack is not connect-

ed.

43-686.fm Page 10 Friday, September 10, 1999 3:13 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack TAD-268 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3580 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack 43-5829 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-1109 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack ET-548 Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-547 Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack ET-596 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung