Radio Shack 15-1925 Bedienungsanleitung

Cat. No. 15-1925

OWNER’S MANUAL

6 in 1 IR/RF

Remote Control

Please read before using this equipment.

SET UP

CD VCR CBL TV

PWR

AUX 1 AUX 2

LASTENTER

PROG

All Lts

Off

All

Off

Brt

Dim

AUDIO SEQ

SURROUND

RECORD

PAUSE

VIDEO SEQ

SHIFT

SLEEP DISPLAY

FRONT

REAR

RIGHTLEFT

MUTE

TV/VCR

VOL

SCAN

Plug'n

Power

123

456

PLAY

STOP

FFREW

15-1925.fm Page 1 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

FEATURES

Your RadioShack 6 in 1 IR/RF Remote Control

comes with an RF command console that allows

you to send commands to most IR (infrared)-con-

trolled devices from any room in your home, up to

100 feet away. You can use it to control your TV,

VCR, cable box, and even lights and appliances

with Plug ’n Power modules (not supplied).

The 6 in 1 IR/RF Remote Control is prepro-

grammed. All you have to do is tell it which TV,

VCR, or other component’s remote controls you

want to replace (by entering 3-digit codes), and it

is automatically ready to operate most of the

same functions as the original remotes.

This manual includes a list of 3-digit manufactur-

er’s codes for TVs, VCRs, cable converters, com-

pact disc players, satellites, and other popular re-

mote-controlled devices.

The 6 in 1 IR/RF Remote Control’s features in-

clude:

IR (Infrared) and RF (Radio-Frequenc

) Com-

mands — use the remote control with the sys-

tem’s RF command console to control your IR re-

mote-controlled devices from up to 100 feet

away, even through walls.

Reassi

nable Device Ke

s— so you can con-

trol more than one of the same type of device (two

VCRs, for example).

Fast Search — when you control more than one

of the same type of device, lets you quickly

search all programmed manufacturers’ codes for

that type of device until you find the code for the

specific device you want to use.

RadioShack is a registered trademark used by

Tandy Corporation.

X-10 is a registered trademark of X-10 (USA) Inc.

15-1925.fm Page 2 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

Channel Scan — lets you scan through all the

available channels on your TV, VCR, or cable

box, stopping at each one for about 3 seconds.

Favorite Channel Scan — lets you set up the re-

mote to scan through a list of up to 10 channels

you select.

Programmable Sequence Command — lets

you press a single key to send a set of com-

mands.

Lighted Keypad — lets you use the 6 in 1 even

in a dark or dimly lit room.

Plug ’n Power Functions — allow you to oper-

ate your Plug ’n Power modules with your remote

and an optional IR controller (RadioShack Unlim-

ited No. 10037703).

Powerful Infrared Beam — uses UHF radio fre-

quencies to go through walls, so you can operate

your remote-controlled devices from a greater

distance than many original remote controls — up

to 100 feet!

Convenient Keypad Design — each key is in

the perfect position for easy operation.

Handy Reference Label — provides a conve-

nient place for you to write down the manufactur-

ers’ codes for your remote-controlled devices.

Toll Free Support and Telephone Program-

ming — you can get expert help for your 6 in 1 IR/

RF Remote Control by calling 1-800-950-7044.

You can even have the manufacturer’s codes for

your remote-controlled devices pro- grammed

into your remote control by phone!

Note: You need four AAA batteries (not supplied)

to power your 6 in 1 IR/RF Remote Control.

15-1925.fm Page 3 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

CONTENTS

How the System Works .......................................... 5

Preparation ............................................................. 7

Installing Batteries .............................................. 7

Setting Up the 6 In 1’s RF Command Console .. 8

Lighting the Keys ............................................... 8

Setting Up Your Remote Control ........................ 9

Using Two or More Similar Devices ................. 10

Operation .............................................................. 12

Using the 6 In 1’s RF Command Console ........ 12

Channel Scan .................................................. 12

Favorite Channel Scan .................................... 13

Setting Favorite Channel Scan ................ 13

Using Favorite Channel Scan .................. 14

Clearing Favorite Channel Scan .............. 14

Command Sequences ..................................... 15

Setting a Sequence ................................. 15

Erasing a Sequence ................................ 15

Punch-Through ............................................... 16

Using Punch-Through .............................. 16

Turning Punch-Through On and Off ......... 16

Using the Sleep Timer ...................................... 17

Controlling Lights and Appliances .................... 17

If You Have Problems .......................................... 20

Manual Code Search ....................................... 20

Determining the 3-Digit Code ................... 21

Troubleshooting ............................................... 22

Downloading Updated Code Information ......... 22

Fast Search ............................................ 24

Manufacturers’ Codes .......................................... 26

Audio Amplifiers ............................................... 26

Audio Amp/Tuners ............................................ 27

Audio Cassette ................................................. 29

Cable Converters ............................................. 31

CD Players ....................................................... 32

Home Automation ............................................ 36

Laser Disc Players ........................................... 36

Miscellaneous Audio ........................................ 37

Satellite Receivers ........................................... 37

Televisions ....................................................... 38

TV/VCR Combinations ..................................... 43

VCRs ................................................................ 43

Video Accessories ........................................... 49

FCC Caution .......................................................... 50

Care and Maintenance ......................................... 51

Specifications ....................................................... 52

15-1925.fm Page 4 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

HOW THE SYSTEM WORKS

Your RadioShack 6 in 1 IR/RF Remote Control

was designed with the functions used most often

to operate TV, VCR, cable converter, CD player,

satellite receiver, and audio equipment.

The 6 in 1 IR/RF Remote Control comes with an

RF command console, which receives radio fre-

quency signals from the 6 in 1 and converts them

into infrared signals to control your devices. The

console is set up in the same room as the devices

you want to control, but you can take the remote

farther away, even into another room.

When you set up the 6 in 1 IR/RF Remote Con-

trol, its command keys work like the keys on your

original remote controls. For example, the 6 in 1

IR/RF Remote Control’s PWRkey workslike akey

on your original remote control which might be la-

beled POWER ON/OFF.

Function

SET UP Used in setting up your

devices.

Lights your keypad for use in

dark or dimly lit rooms.

PWR, digit keys, CH,

VOL, ENTER, LAST,

PROG, SLEEP, DIS-

PLAY, MUTE

Operate the same as the keys

on your original remote con-

trol.

CD, VCR, CBL, TV,

AUX1, AUX2,

Plug’n Power

Use these device keys when

you set up the 6 in 1 to

replace your original remote

controls. You also use the

device keys during normal

operation to tell the 6 in 1

which device you want to con-

trol.

TV/VCR Operates the same as the TV/

VCR key on your original

remote control.

SCAN Allows you to easily browse

through channels on your TV,

VCR, or cable box.

15-1925.fm Page 5 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

Notes:

• The remote control’s red light turns on when

you press a key, and blinks when you have

entered a feature or manufacturer’s code.

• Whenever you use RECORD on the remote

control, you must press it twice. This safety

feature helps you avoid accidentally record-

ing over tapes.

• If you use the 6 in 1 IR/RF Remote Control to

replace extremely complex remote controls,

the 6 in 1 might not be able to duplicate

some of your original remote control’s sel-

dom-used functions, but it can duplicate all

of the original’s most commonly used func-

tions.

AUDIO SEQ, VIDEO

SEQ These keys are for special

sequences that you set up.

SURROUND, SHIFT These keys are for controlling

your Surround Sound system

and other similar devices.

RECORD, PAUSE,

PLAY , REW ,

FF , STOP n

These keys control VCR func-

tions. In addition, these keys

are used to selectoptions and

navigate in your Surround

Sound system, satellite sys-

tem, or other similar devices.

Key Function

15-1925.fm Page 6 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

PREPARATION

INSTALLING BATTERIES

You need four AAA batteries to power your re-

mote control. We recommend alkaline batteries,

such as RadioShack Cat. No. 23-555.

1.Press the battery

compartment cover

tab and lift off the

cover.

2.Install four AAA alka-

line batteries as indi-

cated by the polarity

symbols marked in-

side the compart-

ment.

3.Replace the cover.

Note: Do not place objects on top of the remote

control after you have installed the batteries. This

can press keys for an extended period of time and

reduce battery life.

When the 6 in 1 IR/RF Remote Control’s range

decreases or it operates erratically, replace the

batteries.

Note: Although the 6 in 1 has a built-in memory

backup, we recommend you have fresh batteries

ready to install as soon as you remove the old

ones.

15-1925.fm Page 7 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

SETTING UP THE 6 IN 1’S RF

COMMAND CONSOLE

After you install batteries inthe 6 in 1, just plug the

RF command console’s power cord into any stan-

dard AC outlet in the same room as your IR re-

mote-controlled devices (TV, VCR, cable box,

and so on) and fully extended its antenna. Be

sure the command console is pointed at the de-

vices you want to control.

The command console has a 4-foot IR signal ex-

tension cord for use with devices that are not in

the command console’s line of sight. If you have

such a component, plug the extension cord into

the back of the command console and use the

supplied double-sided tape to attach the exten-

sion cord’s LED over or next to the device’s IR

sensor.

Note: The 6 in 1 transmits both IR and RF signals

at the same time. When testing the command

console, be sure the 6 in 1 is not pointed at your

devices.

LIGHTING THE KEYS

Press to light the keys on the remote. Now,

every time you press a key, the 6 in 1 lights up

and stays lit for about 5 seconds.

To turn off the light, press again.

15-1925.fm Page 8 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

SETTING UP YOUR REMOTE

CONTROL

1. Refer to “Manufacturers’ Codes” on Page 26

and write down the codes for your original

remote controls.

Note: Some manufacturers have several

possible codes listed. Try each until you find

the correct code. See “If You Have Prob-

lems” on Page 20 if you need help.

2. Press the device key for the type of remote

you are replacing (CD, VCR, CBL, TV, AUX1

or AUX2).

Hold down SET UP until the red light blinks

twice, then release it. Enter the 3-digit code.

For example, to replace a TV’s remote con-

trol (manufacturer’s setup code 154), press:

TV – SET UP – 1– 5 – 4

3. When the red light blinks twice again, the 6

in 1 has accepted the code.

4. Point the 6 in 1 IR/RF Remote Control at

your device and press PWR (or CH sfor

some cable boxes). Your device should turn

off (or on, if it was off).

If the remote does not operate your device,

try the other codes listed in the “Manufac-

turer’s Codes” section for your brand of TV,

VCR, cable converter, or other device.

Repeat Steps 2–5 for additional devices.

15-1925.fm Page 9 Monday, July 19, 1999 12:59 PM

Need help? Call

1-800-950-7044

Note: The punch-through feature (see “Punch-

Through” on Page 16) is automatically turned on

for the TV’s volume and mute controls. This

means that when you select cable, for example,

and press one of the volume keys or the mute

key, the remote sends that function to the televi-

sion instead of the cable converter. If you want to

use your cable converter’s volume and mute con-

trols, disable the punch-through feature for these

keys.

USING TWO OR MORE SIMILAR

DEVICES

Each of the 6 in 1 IR/RF Remote Control’s device

keys are preset to control a particular type of de-

vice:

TV — TVs only

CBL — Cable converters, satellite receivers and

video accessories

VCR — VCRs, TV/VCR combinations, laser disc

players, cassette decks and digital audio tape

decks

CD — CD players, amplifiers, tuners, receivers,

and miscellaneous audio products

AUX1 — VCRs, laser disc players, cassette

decks, and digital audio tape decks

AUX2 — Cable converters, satellite receivers, and

video accessories

Plug ’n Power — Plug ’n Power or X-10 home au-

tomation devices

15-1925.fm Page 10 Monday, July 19, 1999 12:59 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Fernbedienung Handbücher

Radio Shack

Radio Shack Keychain-Remote Control System Bedienungsanleitung

Radio Shack

Radio Shack 7-in-One Home Theater Bedienungsanleitung

Radio Shack

Radio Shack Keychain Bedienungsanleitung

Radio Shack

Radio Shack 15-310 Bedienungsanleitung

Radio Shack

Radio Shack 15-1990 Bedienungsanleitung

Radio Shack

Radio Shack 15-309 Bedienungsanleitung

Radio Shack

Radio Shack 6-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 2-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-2147 - Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-303 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack 15-1995 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack 8-IN-ONE REMOTE Bedienungsanleitung

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack Audio/ Video Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 150-2114 Bedienungsanleitung

Radio Shack

Radio Shack Light and Learn Remote Bedienungsanleitung

Radio Shack

Radio Shack Wireless Security Keychain Remote Bedienungsanleitung

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 15-1931 Bedienungsanleitung

Radio Shack

Radio Shack 15-1915B Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung