Raven RS1 Bedienungsanleitung

Raven RS1™/SC1™ with DirecSteer

Installation Manual for Case IH

MXM, Farmall, JX U, TM, T50##, TL,

TL A, TS

Case IH New Holland

lMXM 120, MXM 130, MXM 140, MXM

155, MXM 175, MXM 190

lFarmall: 85U, 95U, 105U

lJX 80U, JX 90U, JX 100U

lJX 1080U, JX 1090U, JX 1110U

lTM 120, TM 130, TM 140, TM

155, TM 175, TM 190

lT5040, T5050, T5060, T5070

lTL70, TL80, TL90, TL100

lTL70A, TL80A, TL90A, TL100A

lTS90, TS100, TS110, TS115

P/N 016-5030-301-A Jun 2023 E45532

Disclaimer

While every effort has been made to ensure the accuracy of the information presented on

this site, Raven Industries assumes no responsibility for omissions and errors. Nor is any

liability assumed for damages resulting from the use of information contained herein.

Raven Industries shall not be responsible or liable for incidental or consequential damages

or a loss of anticipated benefits or profits, work stoppage or loss, or impairment of data

arising out of the use, or inability to use, this system or any of its components. Raven

Industries shall not be held responsible for any modifications or repairs made outside our

facilities, nor damages resulting from inadequate maintenance of this system.

As with all wireless and satellite signals, several factors may affect the availability and

accuracy of wireless and satellite navigation and correction services (e.g. GPS, GNSS, SBAS,

etc.). Therefore, Raven Industries cannot guarantee the accuracy, integrity, continuity, or

availability of these services and cannot guarantee the ability to use Raven systems, or

products used as components of systems, which rely upon the reception of these signals or

availability of these services. Raven Industries accepts no responsibility for the use of any of

these signals or services for other than the stated purpose.

Table of Contents

Disclaimer a

Table of Contents i

Important Safety Information 1

Field Computers, Displays, and Control Consoles 2

Hydraulic Safety 2

Electrical Safety 3

Touch Screen 4

Recommendations and Best Practices 5

Point of Reference 5

Preparing for Install 5

Aerials and Signal Interference 5

Hose Routing 6

Harness Routing 7

Introduction 11

Kit Components 11

Updates 14

Install the DirecSteer System 17

Prepare for the Installation 17

Recommendations 17

Tools Needed 18

Point of Reference 18

Remove the Steering Wheel 19

Install the Anti-Rotation Bracket 21

Install the DirecSteer Assembly 26

Prepare the DirecSteer Assembly 26

Attach the DirecSteer Assembly to the Steering Column 27

Install the DirecSteer System Components 31

Mount the (Optional) Foot Switch 31

Install the Field Computer 32

Install RS1™ with DirecSteer 35

Install the RS1™ Unit 36

Insert a SIM Card in the RS1™ 36

Assemble the Mounting Brackets 37

Prepare the Roof 37

Connect RS1™ Cabling to DirecSteer 38

Best Mounting Practices 39

Route the RS1™ Cabling to DirecSteer 40

Connect to Power 48

RS1™ and DirecSteer System Diagrams 49

Install SC1™/TC1™ with DirecSteer 55

Install the SC1™/TC1™ Unit 56

Install the Antenna 58

Install the 500S™ Receiver 58

Install the 700S™ Receiver 59

Connect SC1™ Cabling to DirecSteer 59

Best Mounting Practices 60

Route the SC1™ Cabling to DirecSteer 61

Connect the 500S™/700S™ Antenna 69

Connect to Power 69

SC1™ and DirecSteer System Diagrams 71

Limited and Extended Warranties 75

Limited Warranty 75

What does this warranty cover? 75

How long is the coverage period? 75

How can I get service? 75

What will Raven Industries do? 75

What is not covered by this warranty? 75

Extended Warranty 76

What does this warranty cover? 76

Do I need to register my product to qualify for the extended warranty? 76

Where can Iregister my product for the extended warranty? 76

How long is the extended warranty coverage period? 77

How can I get service? 77

What will Raven Industries do? 77

What is not covered by this warranty? 77

iii

Important Safety Information

NOTICE

Follow the operation and safety instructions included with the implement and/or controller

and read this manual carefully before installing, servicing, or operating this Raven system.

lPark the machine where the ground is level, clean, and dry.

lBleed pressure from the hydraulic system and leave the machine turned off for the dur-

ation of the installation or maintenance process.

Follow the operation and safety instructions included with the implement and/or controller.

Before installing or operating this Raven system, review and understand the information

presented on this site.

lFailure to follow safety instructions may lead to equipment damage, personal injury, or

death.

lReview equipment operation with your local dealer and follow all safety information

presented on this site.

lContact a local Raven dealer for assistance with any portion of the installation, service,

or operation of Raven equipment.

lFollow all safety labels affixed to system components. Be sure to keep safety labels in

good condition and replace any missing or damaged labels. Contact a local Raven

dealer to obtain replacements for safety labels.

Observe the following safety measures when operating the implement after installing this

Raven system:

lDo not operate this Raven system or any agricultural equipment while under the influ-

ence of alcohol or an illegal substance.

Chapter 1:

Important Safety Information

Chapter1

lBe alert and aware of surroundings while operating this Raven system.

lDetermine and remain a safe working distance from obstacles and bystanders.

The operator is responsible for disabling the system when a safe working dis-

tance has diminished.

lDo not operate the implement on any public road with this Raven system

enabled.

lMaintain control of the vehicle at all times during operation. For example,

lRemain in the operator seat while the system is enabled and disable auto-

mated Raven controls before exiting the operator seat.

lMaintain control of safety devices such as E-Stops at all times during oper-

ation.

lDisable this Raven system prior to starting any maintenance work on the imple-

ment or components of this Raven system.

lDo not attempt to modify or lengthen any of the system control cables. Extension

cables are available from a local Raven dealer.

Field Computers, Displays, and Control Consoles

lIf the display will not be used for an extended period, it is best to remove the display

from the machine and store it in a climate controlled environment. This may help to

extend the service life of electronic components.

lTo prevent theft, secure the display and GNSS antenna when leaving the machine unat-

tended.

WARNING

Hydraulic Safety

When installing or servicing a hydraulic system or hydraulic components, be aware that

hydraulic fluid may be extremely hot and under high pressure. Caution must be exercised.

lAlways wear appropriate personal protective equipment when installing or servicing

hydraulic systems.

lNever attempt to open or work on a hydraulic system with the implement running.

lAlways take care when servicing or opening a system that has been pressurized.

Important Safety Information

lThe implement or machine must remain stationary and switched off with booms or

implement sections unfolded and supported during installation or maintenance.

lAny work performed on the hydraulic system must be done in accordance with the

machine manufacturer’s approved maintenance instructions.

lBefore installing hydraulic components, ensure there are no issues with the machine

hydraulic system (e.g. pump issues, faulty hydraulic motors, fine metal deposits in the

hydraulic lines, etc.).

lTake precautions to prevent foreign material or contaminants from being introduced

into the implement hydraulic system. Contaminants that are able to bypass the

hydraulic filtration system will reduce performance and may damage hydraulic com-

ponents.

lVerify that the hydraulic system is using fresh oil and the filters have been

changed.

lStand clear of the implement when starting the system for the first time after installing

or servicing hydraulic components in case a hose has not been properly connected or

tightened.

CAUTION

Electrical Safety

lAlways verify that power leads are connected to the correct polarity as marked. Revers-

ing the power leads could cause severe damage to the Raven system or other com-

ponents.

lTo prevent personal injury or fire, replace defective or blown fuses with only fuses of

the same type and amperage.

lDo not connect the system power cable to the vehicle ignition or battery until all sys-

tem components are mounted and all electrical connections are completed.

lAlways start the machine before initializing this Raven system to prevent power surges

or peak voltage.

lTo avoid tripping and entanglement hazards, route cables and harnesses away from

walkways, steps, grab bars, and other areas used by the operator or service personnel

when operating or servicing the equipment.

Chapter1

Touch Screen

lOnly touch the touch-screen with your finger or by using a special touch-screen stylus

or pen. Operating the touch-screen with sharp objects may cause permanent damage

to the screen.

lOnly clean the screen using a damp cloth. Never use caustic or other aggressive sub-

stances.

Andere Handbücher für RS1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Raven Landwirtschaftliche Geräte Handbücher

Raven

Raven Sidekick Pro Installations- und Betriebsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven AutoBoom Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven SmarTrax Case IH Titan 4030 Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven AutoBoom XRT Bedienungsanleitung

Raven

Raven AutoBoom UltraGlide XT Bedienungsanleitung

Raven

Raven AutoBoom John Deere 4700 Bedienungsanleitung

Raven

Raven AutoBoom XRT Bedienungsanleitung

Raven

Raven SC1 Bedienungsanleitung

Raven

Raven Hawkeye Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven SC1 Gebrauchs- und Pflegehandbuch

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

Raven

Raven SmarTrax John Deere 8R 2009 Series Bedienungsanleitung

Raven

Raven VSN Bedienungsanleitung

Raven

Raven SmarTrax Case IH Steiger Series Bedienungsanleitung

Raven

Raven AIM Command FLEX Bedienungsanleitung

Raven

Raven SmarTrax Bedienungsanleitung

Raven

Raven AutoBoom Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung

TURF TANK

TURF TANK One+ Bedienungsanleitung