ResMed AIRMINI Bedienungsanleitung

User guide

English | Deutsch |Français |Italiano

Nederlands | ةيبرعلا | Norsk | Svenska | Suomi

ResMed.com/AirMiniApp

English 1

ENGLISH

Welcome

The ResMed AirMini™ system combines ResMed’s AirMini self-

adjusting pressure machine, masks and the AirMini by ResMed™ App.

WARNING

Read this entire guide before using the machine.

Indications for use

The AirMini self-adjusting system is indicated for the treatment of

obstructive sleep apnea (OSA) in patients weighing more than 30 kg.

It is intended for home and hospital use.

Contraindications

Positive airway pressure therapy may be contraindicated in some

patients with the following pre-existing conditions:

•severe bullous lung disease

•pneumothorax

•pathologically low blood pressure

•dehydration

•cerebrospinal fluid leak, recent cranial surgery, or trauma.

Adverse effects

You should report unusual chest pain, severe headache, or increased

breathlessness to your prescribing physician. An acute upper respiratory

tract infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with

the machine:

•drying of the nose, mouth, or throat

•nosebleed

•bloating

•ear or sinus discomfort

•eye irritation

•skin rashes.

At a glance

The AirMini system includes the following:

•AirMini: the AirMini machine, power supply unit, drawstring bag

and one of the following:

•AirMini setup pack - F20: Air tubing, F20 connector OR

•AirMini setup pack - N20: Air tubing, N20 connector, HumidX,

HumidX Plus OR

•AirMini mask pack for P10: Air tubing, AirFit P10 for AirMini mask

(M), P10 cushion (S), P10 cushion (L), HumidX, HumidX Plus, AirFit

P10 headgear clips.

Note: The F20 set up pack can also be used to connect the AirFit F30

mask with AirMini.

English 3

Your AirMini system

Your AirMini system is comprised of the AirMini machine and one mask

pack or one setup pack.

A AirMini machine 6 20W power supply unit

B F20 connector for AirMini and air

tubing

7 F20 connector for AirMini

C N20 connector for AirMini and air

tubing

8 Vent

D AirFit P10 for AirMini and tubing 9 Vent module

1 Start/Stop button 10

Anti Asphyxia Valve (AAV)

2 Power inlet 11 N20 connector for AirMini

3 Air outlet 12 AirFit P10 for AirMini

4 Air filter cover 13 Heat moisture exchanger - HumidX

(blue) and HumidX Plus (gray)

5 Bluetooth®button 14 AirMini tubing

Your machine is compatible with ResMed masks. For a full list of

compatible masks for this device, see the Mask device compatibility list

on ResMed.com/downloads/masks.

Note: Not all masks are available in all regions.

Make sure all parts and accessories used with the machine are

compatible. For compatibility information, refer to ResMed.com for

more information.

Your AirMini machine is designed to work with ResMed’s AirMini app.

However, the AirMini app is not essential to operate the machine. For

more information on the AirMini app, refer to Using your machine with

the AirMini app or the AirMini app Patient eHelp.

HumidX and HumidX Plus

The HumidX and HumidX Plus are waterless humidifiers. These are

designed to provide more comfort by improving the moisture level in

the air you breathe and offering relief from possible dryness.

The HumidX is a good starting point for finding the right level of

humidification. The HumidX Plus will improve the humidity level further

and is useful when the ambient humidity level is very low (eg, high

altitudes, on an aircraft).

The HumidX and HumidX Plus can be used with the N20 connector for

AirMini and AirFit P10 for AirMini only.

The HumidX and HumidX Plus must be replaced within 30 days of

opening the HumidX/HumidX Plus pack.

English 5

Setting up and starting therapy

Using your mask

Use your AirMini machine only as directed by your physician or

healthcare provider.

For information on fitting your mask, refer to the mask user guide.

Set up your machine

1. Plug the power supply unit into

the machine and the power

outlet. The connector has an

angled edge so that the power

cord can only be inserted into

the machine one way.

2. Connect the gray end of the

AirMini tubing firmly to the air

outlet.

Add optional humidification

(for N20 or AirFit P10 for

AirMini masks only)

To insert the HumidX or HumidX

Plus:

1. Open the connector by gently

twisting it.

2. Hold the HumidX/HumidX Plus

at the sides, with the colored

side pointing down and insert

it.

3. Gently push together the

connector and twist until it

locks in place.

Connect your mask

1. Fit your mask as instructed in the mask user guide.

2. Attach the connector to your mask.

F20 Series

F30 Series

N20 Series

AirFit P10 for AirMini

Start therapy

Start therapy by pressing the

Start/Stop button or breathe

normally if SmartStart™ is

enabled.

Stop therapy

1. Remove your mask.

2. Press the Start/Stop button or wait until the machine stops if

SmartStop is activated.

English 7

Comfort features

Ramp Time, Pressure Relief and SmartStart are enabled on your

machine.

Ramp Time

Designed to make the beginning of therapy more comfortable, Ramp

Time is the period during which pressure gradually increases from a

lower start pressure to the prescribed treatment pressure.

SmartStart

When SmartStart is turned on, therapy starts automatically when you

breathe into your mask.

SmartStop

When SmartStop is turned on, therapy stops automatically after a few

seconds when you remove your mask.

Expiratory Pressure Relief

Designed to make therapy more comfortable, Expiratory Pressure Relief

(EPR) maintains optimal treatment during inhalation and reduces the

delivered mask pressure during exhalation.

Changing comfort features

Your AirMini machine has been set up for your needs by your provider,

but you may find that you want to make small adjustments to comfort

settings to make your therapy more comfortable.

For more information about comfort settings, or for information on

changing these settings, refer to the AirMini app Patient eHelp.

Using your machine with the AirMini app

Your AirMini machine can be used with ResMed’s AirMini app. Once

you have paired and connected your machine to your smart device via

Bluetooth, you can start and stop therapy, change comfort settings and

view your therapy data via the AirMini app. Data sent via Bluetooth is

encrypted to protect your privacy.

Connecting your machine and smart device

Before connecting the AirMini machine to a smart device, ensure that

the latest version of the AirMini app is installed on the smart device. If

not, download the app from the App StoreSM or the Google Play store.

1. Ensure your machine is set up correctly and plugged into a power

source.

2. On your smart device, enable Bluetooth.

3. Open the AirMini app.

The first time you open the AirMini app, you will be asked to:

•provide consent for the use of analytics

•accept ResMed’s terms of use and privacy notice

•provide consent for the AirMini app to upload data to the cloud

Select the necessary check boxes to provide consent and accept

policies.

Notes:

•The check box for analytics consent is selected by default.

•From time to time, the terms of use may be updated and you

may be required to provide consent again.

•If you agree to allow the AirMini app to upload your data to the

cloud, it will be uploaded from the AirMini app to a secure server.

•There are two distinct data upload features:

Andere Handbücher für AIRMINI

Inhaltsverzeichnis

Sprachen:

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed ResLink Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed Aria Health Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed AirFit F30 Bedienungsanleitung

ResMed

ResMed Mirage Activa Bedienungsanleitung

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed Flow Generator AutoSet CS 2 Bedienungsanleitung

ResMed

ResMed ResScan Bedienungsanleitung

ResMed

ResMed Swift FX Bella Bedienungsanleitung

ResMed

ResMed Ultra Mirage NVFFM Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Bedienungsanleitung

ResMed

ResMed lumis series Bedienungsanleitung

ResMed

ResMed AcuCare HFNC Bedienungsanleitung

ResMed

ResMed 61106 Bedienungsanleitung

ResMed

ResMed Mirage Swift II Bedienerhandbuch

ResMed

ResMed AirFit N20 Classic Bedienungsanleitung

ResMed

ResMed Ultra Mirage II Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed VPAP Auto Bedienungsanleitung

ResMed

ResMed H5i Technisches Handbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung