ResMed AIRMINI Bedienungsanleitung

User guide

English

ResMed.com/AirMiniApp

English 1

ENGLISH

Welcome

The AirMini™system combines ResMed’s AirMini self-adjusting

pressure machine, masks and the AirMini app.

WARNING

Read this entire guide before using the machine.

CAUTION

In the US, Federal law restricts this device to sale by or on the order

of a physician.

Indications for use

The AirMini self-adjusting system is indicated for the treatment of

obstructive sleep apnea (OSA) in patients (female patients with mild to

moderate OSA when using AutoSet for Her treatment mode) weighing

more than 66 lb (30 kg).

It is intended for home and hospital use.

Contraindications

Positive airway pressure therapy may be contraindicated in some

patients with the following pre-existing conditions:

•severe bullous lung disease

•pneumothorax

•pathologically low blood pressure

•dehydration

•cerebrospinal fluid leak, recent cranial surgery, or trauma.

Adverse effects

You should report unusual chest pain, severe headache, or increased

breathlessness to your prescribing physician. An acute upper respiratory

tract infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with

the machine:

•drying of the nose, mouth, or throat

•nosebleed

•bloating

•ear or sinus discomfort

•eye irritation

•skin rashes.

At a glance

The AirMini system includes the following:

•AirMini: the AirMini machine, power supply unit, drawstring bag

and one of the following:

•AirMini setup pack - F20: Air tubing, F20 connector OR

•AirMini setup pack - N20: Air tubing, N20 connector, HumidX™,

HumidX Plus OR

•AirMini mask pack for P10: Air tubing, AirFit P10 for AirMini mask

(M), P10 cushion (S), P10 cushion (L), HumidX, HumidX Plus, AirFit

P10 headgear clips.

English 3

Your AirMini system

Your AirMini system is comprised of the AirMini machine and one mask

pack or one setup pack.

A AirMini machine 6 20W power supply unit

B F20 connector for AirMini and air

tubing

7 F20 connector for AirMini

C N20 connector for AirMini and air

tubing

8 Vent

D AirFit P10 for AirMini and tubing 9 Vent module

1 Start/Stop button 10

Anti Asphyxia Valve (AAV)

2 Power inlet 11 N20 connector for AirMini

3 Air outlet 12 AirFit P10 for AirMini

4 Air filter cover 13 Heat moisture exchanger - HumidX

(blue) and HumidX Plus (gray)

5 Bluetooth™button 14 AirMini tubing

Your machine is compatible with ResMed's F20 and N20 series masks

and with the AirFit P10 for AirMini. Make sure all parts and accessories

used with the machine are compatible. For compatibility information,

refer to www.resmed.com for more information.

Your AirMini machine is designed to work with ResMed’s AirMini app.

However, the AirMini app is not essential to operate the machine. For

more information on the AirMini app, refer to Using your machine with

the AirMini app or the AirMini app Patient eHelp.

HumidX and HumidX Plus

The HumidX and HumidX Plus are waterless humidifiers. These are

designed to provide more comfort by improving the moisture level in

the air you breathe and offering relief from possible dryness.

The HumidX is a good starting point for finding the right level of

humidification. The HumidX Plus will improve the humidity level further

and is useful when the ambient humidity level is very low (eg, high

altitudes, on an aircraft).

The HumidX and HumidX Plus can be used with the N20 connector for

AirMini and AirFit P10 for AirMini only.

The HumidX and HumidX Plus must be replaced within 30 days of

opening the HumidX/HumidX Plus pack.

Setting up and starting therapy

Using your mask

Before you set up your machine, make sure you use a compatible

mask. For a full list of compatible masks for this device, see the

Mask/Device Compatibility List on

www.resmed.com/downloads/masks. If you do not have internet

access, please contact your ResMed representative.

For information on fitting your mask, refer to the mask user guide.

Use your AirMini machine only as directed by your physician or

healthcare provider.

English 5

Set up your machine

1. Plug the power supply unit

into the machine and the

power outlet. The connector

has an angled edge so that

the power cord can only be

inserted into the machine

one way.

2. Connect the gray end of the

AirMini tubing firmly to the

air outlet.

Add optional humidification

(for N20 or AirFit P10 for

AirMini only)

To insert the HumidX or HumidX

Plus:

1. Open the connector by

gently twisting it.

2. Hold the HumidX/HumidX

Plus at the sides, with the

colored side pointing down

and insert it.

3. Gently push together the

connector and twist until it

locks in place.

Connect your mask

1. Fit your mask as instructed in the mask user guide.

2. Attach the connector to your mask.

F20 Series N20 Series AirFit P10 for AirMini

Start therapy

1. Start therapy by pressing

the Start/Stop button or

breathe normally if

SmartStart™ is enabled.

Stop therapy

1. Remove your mask.

2. Press the Start/Stop button or wait until the machine stops if

SmartStop is activated.

Comfort features

Ramp Time, Pressure Relief and SmartStart are enabled on your

machine by default. For more information or to change these settings,

refer to the AirMini app Patient eHelp.

English 7

Using your machine with the AirMini app

Your AirMini machine can be used with ResMed’s AirMini app. Once

you have paired and connected your machine to your smart device via

Bluetooth, you can start and stop therapy, change comfort settings and

view your therapy data via the AirMini app. Data sent via Bluetooth is

encrypted to protect your privacy.

Connecting your machine and smart device

Before you start, ensure that the latest version of the AirMini app is

installed on your smart device. If not, download the app from the App

Store™or Google Play™.

1. Ensure your machine is set up correctly and plugged into a power

source.

2. On your smart device, enable Bluetooth.

3. Open the AirMini app.

The first time you open the AirMini app you will be asked to consent

to the use of cookies and to accept ResMed's Terms and Conditions

and Privacy Policy.

4. Check the boxes on the Welcome screen and then tap Continue.

5. On your machine, press the Bluetooth button when prompted by

the AirMini app.

When the light starts to flash blue , Bluetooth is enabled and your

machine is ready to connect.

6. On your smart device, tap Connect.

When your machine is discovered, the machine name appears in the

machine selection list.

7. Select the machine name from the list to connect.

8. The first time you pair your machine with your smart device, you will

need to perform the authentication procedure.

When prompted by the AirMini app, authenticate by entering the

four-digit key located on the back of your machine.

Alternatively, you can tap Scan code. You will be prompted to allow

the use of your smart device's camera and then to position the

machine’s QR code within the camera's viewing frame. The QR

code is found on the back of your machine.

9. Tap Continue to close the window.

When successfully connected, the Bluetooth connection icon

is displayed in the top right corner of the app.

Bluetooth status indicators

Bluetooth indicator light is flashing

blue.

Your machine is in discoverable mode and

ready for pairing.

Bluetooth indicator light is constantly

blue.

Your machine is connected to your

smartphone.

Bluetooth indicator light is constantly

white (airplane mode).

Bluetooth on your machine is disabled.

Bluetooth indicator light is off. Your machine is not connected to your

smartphone.

Note: Once therapy starts, the indicator light will start to fade.

Cleaning and maintenance

It is important that you regularly clean your AirMini machine to make

sure you receive optimal therapy. The following sections will help you

with disassembly, cleaning and checking your machine.

Andere Handbücher für AIRMINI

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Swift FX Bella Gray Bedienungsanleitung

ResMed

ResMed Aria Health Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed Quattro FX Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed AIRMINI Abmessungen

ResMed

ResMed Astral Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed Swift FX for Her Montageanleitung

ResMed

ResMed S8 ESCAPE S8 Bedienungsanleitung

ResMed

ResMed VPAP III ST-A Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed VPAP Auto Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed ELITE S8 Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed Mirage FX Bedienungsanleitung

ResMed

ResMed AirFit N10 Bedienungsanleitung

ResMed

ResMed AirFit N30 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung