Rimage Autostar II Bedienungsanleitung

Replace the Printer on a Rimage Autoloader

USB Cable

Printer Power Cord

Printer Cable

Printer Power Cord

USB Cable

If your Rimage autoloader has a printer cover, remove the cover.

For packing instructions, refer to one of the following documents:

From the back of the printer disconnect the following cables:

Printer cable

Printer power cord

USB cable

•

1Access the printer.

4Pack the printer for shipping.

Before you begin:

1. Stop or pause all jobs.

2. Power off the control center (external or embedded).

3. Power off the Rimage autoloader.

4. Disconnect the power cord from the power outlet.

Everest printer

Prism printer

Caution: Some cables in your system may be latched. Equipment

damage may occur if cables are not disconnected appropriately.

2Disconnect the cables.

3Remove the printer from the autoloader.

Lift the printer up and off the autoloader.

Caution: Lift the Everest printer with care; it is very heavy.

Pack the Rimage Everest II™ Printer (110891-001)

Pack the Rimage Everest III™ Printer (110877-001)

Pack the Rimage Prism™ Printer (112143-001)

These documents are available at www.Rimage.com/Support.html.

Navigate: Product Family > Support - Product > Documents tab.

Refer to the label on the box of your replacement printer.

5Unpack the replacement printer.

 Note: The term “autoloader” is used throughout this document to refer to the

following Rimage products: AutoPrinter II™, Endeavor/Disclab™, DLN5100™,

DL5200™, DLN5200™, 5100N™, 5300N™, Autostar II™, Protégé II™, Amigo

II™, Producer 7100™, Producer 8100™, Producer 7100N™, and Producer

8100N™.

2000584_B

USB Cable

Printer Power Cord

Printer Cable

USB Cable Printer Power Cord

Slots

Printer Plate

Place the printer on your Rimage autoloader so that the printer feet slide

into the slots on the printer plate.

6Place the printer on the Rimage autoloader.

If your new printer is an Everest III, follow the prompts in the New

Hardware Wizard to add the printer to your list of available printers.

10 Install the printer driver (Everest III only).

At the back of the printer connect the following cables:

Printer cable

Printer power cord

USB cable

•

Everest printer

Prism printer

7Connect the cables.

Refer to the instructions in the user guide that was included with your

Rimage autoloader. User guides are also available at www.Rimage.

com/Support.html. Navigate: Product Family > Support - Product >

Documents tab.

Your Rimage autoloader is ready for use.

12 If necessary, align the printer to the Rimage

autoloader.

a. Connect the autoloader power cord to the power outlet.

b. Press the autoloader power switch to power on the system.

8Power on the Rimage autoloader.

If your printer was shipped to you with a Rimage software disc, install the

software on the embedded or external control center.

Important! Be sure to uninstall any previous Rimage software before

installing your new software.

Install the Rimage software.

Install the latest autoloader or AutoPrinter rmware. Firmware and

instructions are available at Rimage.com/Support.html. Navigate:

Product Family > Support - Product > Downloads tab.

Important! If you are replacing a Prism printer with an Everest III

printer, refer to the Updating Printer Firmware using Gemini Utilities

document (PN 2000759) included with your new printer.

11 Update the autoloader or AutoPrinter rmware.

Andere Handbücher für Autostar II

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rimage Drucker Handbücher

Rimage

Rimage Desktop 360i Bedienungs- und Sicherheitshinweise

Rimage

Rimage Autostar II Bedienungsanleitung

Rimage

Rimage Everest 600 Bedienungsanleitung

Rimage

Rimage Desktop 360i Handbuch

Rimage

Rimage 480i Bedienungsanleitung

Rimage

Rimage Everest III Bedienungsanleitung

Rimage

Rimage Everest Encore Bedienungsanleitung

Rimage

Rimage PrismPlus! Bedienungsanleitung

Rimage

Rimage 480i Betriebsanleitung

Rimage

Rimage Prism III Bedienungsanleitung

Rimage

Rimage Amigo II Montageanleitung

Rimage

Rimage Autostar II Bedienungs- und Sicherheitshinweise

Rimage

Rimage 110705-000 Bedienungsanleitung

Rimage

Rimage Producer IIIN Bedienungsanleitung

Rimage

Rimage Everest Kurzanleitung

Rimage

Rimage Everest Encore Bedienungs- und Sicherheitshinweise

Rimage

Rimage Amigo II Bedienungsanleitung

Rimage

Rimage Professional 5400N Bedienungsanleitung

Rimage

Rimage Amigo II Handbuch

Rimage

Rimage Everest II Bedienungsanleitung

Rimage

Rimage CDPR6 Bedienungsanleitung

Rimage

Rimage Everest Bedienungsanleitung

Rimage

Rimage Everest Bedienungsanleitung

Rimage

Rimage AutoPrinter Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung