ROBOTIQ 2F-85 Bedienungsanleitung

1.WHAT IS SUPPLIED?

2F-85 Basic gripper unit

or 2F-140 Basic gripper unit

Gripper coupling

Connection protector

Required hardware

2.TOOLS YOU NEED

4.MOUNTING

This step-by-step guide will allow you to install and use

your 2-Finger Adaptive Gripper on e-Series Universal

Robots.

3.GET THE LATEST

THANK YOU FOR

CHOOSING ROBOTIQ

3mm

hex key

4mm

hex key

2mm

hex key

5.SOFTWARE INSTALLATION

6. ACTIVATE

THE GRIPPER

• Have a USB stick that contains the .urcap file (section 3).

• Insert the USB stick in the robot’s teach pendant.

• Tap the triple bar icon in the upper right corner and select

the System menu on the left.

• Tap the URCaps submenu and then tap the +sign at the

bottom of the screen.

• Open Robotiq_Grippers-X.X.X.urcap.

• Tap the Restart button to activate the URCap.

• Tap the UR+ button to expand the Gripper Toolbar.

• The Gripper toolbar allows you to jog and test the

Gripper. For more information, refer to the

instruction manual.

Gripper Activate Node

• Tap the Installation button at the top of the screen.

• Tap the URCaps button in the navigation pane on the left.

• Select Gripper in the dropdown list.

• Go to the Dashboard tab.

• Check the Gripper is connected to the wrist checkbox.

• Tap the Scan button to locate any connected Gripper.

• Once the Gripper is located, tap the Activate button.

• Mount the coupling on your robot arm. Align with the

provided dowel pin.

• Secure using the provided M6 screws and tooth lock

washers

• Mount the Gripper on the coupling. Align with the dowel

pin.

• Secure using the provided M5 screws and tooth lock

washers.

• Plug the coupling’s cable in the robot’s wrist connector.

• Cover the connection using the protector and the

provided M4 screws.

Standard upon delivery of AGC-ES-UR-KIT-85 or -140

(AGC-GRP-2F85)

(AGC-GRP-2F140)

(GRP-ES-CPL-062)

(GRP-ES-CPL-PRO)

BEFORE OPERATING THE GRIPPER, PLEASE READ

YOUR INSTRUCTION MANUAL.

Visit: support.robotiq.com

DOWNLOADING THE URCAP

1. Go to Select brand > Universal Robots > 2F-85 and

2F-140 Grippers > Software > Gripper Software.

2. Select DOWNLOAD ZIP.

3. Save the ZIP file UCG-X.X.X to a USB stick.

DOWNLOADING THE INSTRUCTION MANUAL

Go to Select brand > Universal Robots > 2F-85 and

2F-140 Grippers > Documents > Gripper Instruction >

Download PDF.

* Select the connection protector corresponding to your robot

model in the GRP-ES-CPL-PRO kit.

CAREFUL !

FRAGILE PINS

M5 screws

and washers

M6 screws

and washers

M4 screws

Connection

protector*

Gripper

Gripper coupling

(Coupling cable)

Dowel pin

Parallel locking pins**

M3 screws

**Parallel locking pins can be installed to perform exclusively parallel

grasps with the Gripper. See instruction manual for more details.

November 2021

X-990037-B

For installation on

e-Series

Universal Robots

8. USE NODES TO PROGRAM

WITH THE GRIPPER

7. HOW TO CALIBRATE

THE GRIPPER

• Go to the Installation tab, tap the URCaps menu on the

left and select Gripper.

• Tap the Calibration tab.

• Tap the Calibrate button next to the Gripper icon to

start the Calibration wizard.

• The wizard prompts the user to fully close the Gripper,

regardless of the type of fingers/fingertips used.

• Measure the distance between the fingers/fingertips

and enter the measurement in the appropriate box.

• Tap the Continue button.

• The user is then asked to fully open the Gripper.

• Measure the distance between the

fingers/fingertips and enter the measurement in the

appropriate box.

• Tap the Continue button to complete the

Calibration wizard.

• Tap the UR+ button to expand the Gripper Toolbar.

Depending on the PolyScope settings used, the

Gripper position measurements can either display in

metric or imperial units.

QUICK START GUIDE

2F- 85

2F- 140

X-990037-B

[email protected]

T: 1.418.380.2788 ext. 3

support.robotiq.com

https://robotiq.com/support

This product is under a 1-year warranty.

Refer to your product instruction manual for details.

Gripper Node

• Tap the Program button at the top of the screen.

• Tap the URCaps button in the navigation pane on the left.

• Select Gripper in the dropdown list.

• Go to the Command tab to edit your Gripper’s action.

Grip Check Node

• Tap the Program button at the top of the screen.

• Tap the URCaps button in the navigation pane on the left.

• Select Grip Check in the dropdown list.

• Go to the Command tab to edit the node.

• Select a condition (If object is detected vs. If object is not

detected).

• If applicable, enter the object dimension for validation.

Andere Handbücher für 2F-85

Dieses Handbuch passt für folgende Modelle

Andere ROBOTIQ Robotik Handbücher

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ PALLETIZING SOLUTION Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ PE Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ EPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ EPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ CB Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ Wrist Camera Bedienungsanleitung

ROBOTIQ

ROBOTIQ AirPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ AirPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ 2F-85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ Sanding Kit Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ 2F-85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ PE Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ AirPick Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ HAND-E Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ 2-Finger 85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ FT 300-S Bedienungsanleitung

ROBOTIQ

ROBOTIQ 85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ PE20 Bedienungsanleitung

ROBOTIQ

ROBOTIQ PE20 Bedienungsanleitung

ROBOTIQ

ROBOTIQ 2F-85 Bedienungsanleitung

Beliebte Robotik Handbücher anderer Marken

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung

SunFounder

SunFounder PiDog Bedienungsanleitung

Universal Robots

Universal Robots UR5 Bedienungsanleitung

Universal Robots

Universal Robots E Series Bedienungsanleitung

YASKAWA

YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung

EFORT

EFORT ECR5 Gebrauchsanweisung

Epson

Epson C8 Series Bedienungsanleitung

WowWee

WowWee ROBOQUAD Bedienungsanleitung

Milvus Robotics

Milvus Robotics SEIT 100 Bedienungsanleitung

RoboMaster

RoboMaster AI Robot 2020 Standard Version Bedienungsanleitung

fischertechnik

fischertechnik Mini Bots Bedienungsanleitung

YASKAWA

YASKAWA MA2010 Handbuch

Abicor Binzel

Abicor Binzel iCAT mini Bedienungsanleitung

ABB

ABB OmniCore E10 Bedienungsanleitung

YASKAWA

YASKAWA Motoman DX200 Bedienungsanleitung

pitsco

pitsco Tetrix Max Bedienungsanleitung

ECOVACS

ECOVACS DEEBOT R95 Bedienungsanleitung

Feng Yuan

Feng Yuan Interstellar Warrior Bedienungsanleitung