Rockwell Automation Allen-Bradley 2080-LC20 Bedienungsanleitung

Micro800 Controllers Starter Pack Quick Start

Catalog Numbers Bulletin 2080-LC20, 2080-LC30, 2080-LC50

Quick Start

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

3Rockwell Automation Publication 2080-QS004B-EN-E - October 2017 3
Where to Start
Follow this path to learn how to use the Connected Components Workbench™ software with your Micro800™ controllers 
and PanelView™ 800 terminals.
Chapter 1
Study Guide Overview
Chapter 2
Hands On Content
Chapter 3
Create and Save a Connected 
Components Workbench Project
Chapter 4
Build and Download Project
Chapter 5
Connect the Input Simulator Board
Chapter 6
Monitor Your Micro800 Controller 
Chapter 7
How to Create Variables
Chapter 8
How to Implement an Instruction Block
Chapter 9
How to Add a Plug-in Module
Chapter 10
Learn About User-Defined Functions 
(UDF) and User-Defined Function Blocks 
(UDFB)
Chapter 11
Import and Export Project
Chapter 12
Quick Tips
Chapter 13
PanelView 800 HMI Design Using 
Connected Components Workbench
Chapter 14
Using HMI Tags
Chapter 15
Configure Micro800 Controller 
Ethernet Settings
Chapter 16
HMI Tag Editor
Chapter 17
HMI Screen
Chapter 18
Configure PanelView 800 Terminal 
Ethernet Settings
Chapter 19
Download HMI Application
Chapter 20
Test the HMI Application

4 Rockwell Automation Publication 2080-QS004B-EN-E - October 2017

Where to Start

Notes:

Rockwell Automation Publication 2080-QS004B-EN-E - October 2017 5

Table of Contents

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preface

About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 1

Study Guide Overview

Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Start Connected Components Workbench Software . . . . . . . . . . . . . . . . 11

Connected Components Workbench Design Environment. . . . . . . . . . 12

Project Organizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Chapter 2

Hands On Content

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 3

Create and Save a Connected

Components Workbench

Project

Create a Connected Components Workbench Project . . . . . . . . . . . . . . 19

Save Your Connected Components Workbench Project. . . . . . . . . . . . . 25

Chapter 4

Build and Download Project

Build and Download the Project to your Micro800 Controller . . . . . . . 27

Chapter 5

Connect the Input Simulator

Board

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Chapter 6

Monitor Your Micro800

Controller Program

Monitor Your Program in

Connected Components Workbench Software . . . . . . . . . . . . . . . . . . . . . 33

View Real-time Changes in List Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Chapter 7

How to Create Variables

Create Local Variables for your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Chapter 8

How to Implement an

Instruction Block

Add a TON Instruction Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Enter Parameters for TON Instruction Block. . . . . . . . . . . . . . . . . . . . . . . 41

Add an ANY_TO_TIME Instruction Block . . . . . . . . . . . . . . . . . . . . . . . 44

6Rockwell Automation Publication 2080-QS004B-EN-E - October 2017

Table of Contents

Chapter 9

How to Add a Plug-in Module

Add a Plug-in Module to the Micro800 Controller. . . . . . . . . . . . . . . . . . 49

Chapter 10

Learn About User-Defined

Functions (UDF) and

User-Defined Function Blocks

(UDFB)

Create a UDF for your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Add the UDF to your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Get Sample Code from the

Rockwell Automation Sample Code Library . . . . . . . . . . . . . . . . . . . . . . . . 59

Import Sample Code into Your Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chapter 11

Import and Export Project

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Chapter 12

Quick Tips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Chapter 13

PanelView 800 HMI Design

Using Connected Components

Workbench

Add a PanelView 800 Terminal to Your Project. . . . . . . . . . . . . . . . . . . . . 69

Configure Your PanelView 800 Terminal Communication Settings . . 70

Chapter 14

Using HMI Tags

Create Global Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Edit Ladder Diagram Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Chapter 15

Configure Micro800 Controller

Ethernet Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Chapter 16

HMI Tag Editor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Chapter 17

HMI Screen

Create a Screen for Your PanelView 800 Application. . . . . . . . . . . . . . . . 83

Create Objects for Your Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Chapter 18

Configure PanelView 800

Terminal Ethernet Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Chapter 19

Download HMI Application

Save and Download Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Rockwell Automation Publication 2080-QS004B-EN-E - October 2017 7

Table of Contents

Chapter 20

Test the HMI Application

Run the HMI Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Test the HMI application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Appendix A

Set Up Serial Communication

Between PC and Micro820

Controller

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Connect the PC to the Micro820 Controller . . . . . . . . . . . . . . . . . . . . . . 108

Configure RSLinx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Restore Serial Port to Factory Default Setting

Using MicroSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

8Rockwell Automation Publication 2080-QS004B-EN-E - October 2017

Table of Contents

Notes:

9Rockwell Automation Publication 2080-QS004B-EN-E - October 2017 9

Preface

About This Publication

Use this quick start to learn how to use a Micro800 controller with a PanelView 800 terminal. You will use the Connected

Components Workbench software.

Additional Resources

These documents contain additional information concerning related products from Rockwell Automation.

You can view or download publications at

http:/www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Resource Description

Micro800 Controllers Starter Pack Quick Reference,

publication 2080-QR003 Provides information for setting up the Micro800 controllers and input simulator

boards.

PanelView 800 HMI Terminals User Manual, publication

2711R-UM001 Information in setting up and using the PanelView 800 terminals, and installing

the Connected Components Workbench software.

Micro820 20-point Programmable Controllers User

Manual, publication 2080-UM005 Information on setting up and using the Micro820™ controllers.

Micro830 and Micro 850 Programmable Controllers

User Manual, publication 2080-UM002 Information on setting up and using the Micro830®and Micro850®controllers.

Connected Components Workbench Software Website

http://www.rockwellautomation.com/global/support/c

onnected-components/workbench.page

Provides product information on Connected Components Workbench software

and links to download the software.

Connected Components Workbench Online Help Online Help that provides a description of the different elements of the

Connected Components Workbench software.

10 Rockwell Automation Publication 2080-QS004B-EN-E - October 2017

Preface

Notes:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation Micro830 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix 5580 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ARMORSTART 280D Bedienungsanleitung

Rockwell Automation

Rockwell Automation External Dynamic Brake Kit Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-Flex 150 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ARMORSTART Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix Benutzerhandbuch

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CompactLogix 5370 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation ArmorStart Bulletin 280G Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 750-Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Benutzerhandbuch

Rockwell Automation

Rockwell Automation Allen-Bradley G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation powerflex 4 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1336 PLUS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch