Rockwell Automation Allen-Bradley Micro800 Bedienungsanleitung

Quick Start

Micro800 Controllers Starter Pack

Controller Catalog Numbers 2080-LC10, 2080-LC20, 2080-L50E

Starter Pack Catalog Numbers 2080-LC10-STARTERPACK,

2080-LC20-STARTERPACK, 2080-LC20-STARTERPACKL,

2080-LC50-STARTERPACK, 2080-LC50-STARTERPACKL

Original Instructions

2Rockwell Automation Publication 2080-QS004C-EN-E - October 2023

Micro800 Controllers Starter Pack Quick Start

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this

equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and

wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried

out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application

of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements

associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the

examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in

this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

The following icon may appear in the text of this document.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Identifies information that is useful and can help to make a process easier to do or easier to understand.

Rockwell Automation Publication 2080-QS004C-EN-E - October 2023 3

Table of Contents

Preface

About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Download Firmware, AOP, EDS, and Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Where to Start

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 1

Study Guide Overview What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Start Connected Components Workbench Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connected Components Workbench Software Design Environment . . . . . . . . . . . 11

Project Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Toolbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 2

Hands-on Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Chapter 3

Create and Save a Connected

Components Workbench Project

Create a Connected Components Workbench Project. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Save Your Connected Components Workbench Project . . . . . . . . . . . . . . . . . . . . . . . . . 23

Chapter 4

Build and Download Project Build and Download the Project to your Micro800 Controller . . . . . . . . . . . . . . . . . . . . . 25

Chapter 5

Connect the Input Simulator

Board

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 6

Monitor Your Micro800

Controller Program

Monitor Your Program in Connected Components Workbench Software . . . . . . . . . . . 31

View Real-time Changes in List Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 7

How to Create Variables Create Local Variables for your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4Rockwell Automation Publication 2080-QS004C-EN-E - October 2023

Table of Contents

Chapter 8

How to Implement an

Instruction Block

Add a TON Instruction Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Enter Parameters for TON Instruction Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Add an ANY_TO_TIME Instruction Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Chapter 9

How to Add a Plug-in Module Add a Plug-in Module to the Micro800 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Chapter 10

Learn About User-defined

Functions and User-defined

Function Blocks

Create a UDF for your Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Add the UDF to your Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Get Sample Code from the Rockwell Automation Sample Code Library. . . . . . . . . . . . . 53

Import Sample Code into Your Project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Chapter 11

Import and Export Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Chapter 12

Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chapter 13

PanelView 800 Graphic Terminal

Design in Connected

Components Workbench

Software

Add a PanelView 800 Terminal to Your Project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Configure Your PanelView 800 Terminal Communication Settings . . . . . . . . . . . . . . . . 64

Chapter 14

Using HMI Tags Create Global Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Edit Ladder Diagram Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Chapter 15

Configure Micro800 Controller

Ethernet Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Chapter 16

HMI Tag Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chapter 17

HMI Screen Create a Screen for Your PanelView 800 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Create Objects for Your Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Chapter 18

Configure PanelView 800

Terminal Ethernet Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Rockwell Automation Publication 2080-QS004C-EN-E - October 2023 5

Table of Contents

Chapter 19

Download HMI Application Save and Download Project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Chapter 20

Test the HMI Application Run the HMI Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Test the HMI application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Appendix A

Set Up Serial Communication

Between Computer and

Micro820 Controller

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Connect the Computer to the Micro820 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Configure RSLinx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Restore Serial Port to Factory Default Setting Using a microSD Card . . . . . . . . . . . . . 103

6Rockwell Automation Publication 2080-QS004C-EN-E - October 2023

Table of Contents

Notes:

Rockwell Automation Publication 2080-QS004C-EN-E - October 2023 7

Preface

About This Publication

Use this quick start to learn how to use the Micro800™ controller, a PanelView™ 800 graphic terminal, and Connected Components

Workbench™ software.

Download Firmware, AOP, EDS, and Other Files

Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes from the Product Compatibility and

Download Center at rok.auto/pcdc.

Summary of Changes

This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect

all changes.

Additional Resources

These documents contain additional information concerning related products from Rockwell Automation. You can view or download

publications at rok.auto/literature.

Topic Page

Updated template throughout

Updated minimum Micro800 controller firmware revision 11, 17

Updated minimum Connected Components Workbench software version 11

Updated step in Create a Connected Components Workbench Project 18

Updated steps in Create the Ladder Diagram program 20, 21, 22

Added tip to Monitor Your Program in Connected Components Workbench Software 31

Updated step in Monitor Your Program in Connected Components Workbench Software 31

Updated steps in Add a TON Instruction Block 37, 38

Updated step in Enter Parameters for TON Instruction Block 39

Updated steps in Add an ANY_TO_TIME Instruction Block 40, 41

Updated step in Add a Plug-in Module to the Micro800 Controller 47

Updated step in Add the UDF to your Program 51

Updated Quick Tips table 61

Updated step in Configure Your PanelView 800 Terminal Communication Settings 66

Updated steps in Create Global Variables 69

Updated steps in HMI Tag Editor 75

Updated step in Restore Serial Port to Factory Default Setting Using a microSD Card 104

Additional Resources

Resource Description

Micro800 Controllers Starter Pack Quick Reference, publication 2080-QR003 Provides information for setting up the Micro800 controllers and input simulator boards.

Micro800 Programmable Controller Family Selection Guide,

publication 2080-SG001 Provides information to help you select the Micro800 controller, plug-ins, expansion I/O, and

accessories, based on your requirements.

Micro800 Programmable Controllers Technical Data, publication 2080-TD001 Provides detailed specifications for Micro800 controllers, expansion I/O modules, plug-in

modules, and accessories.

Micro810 Programmable Controllers User Manual, publication 2080-UM001 Describes how to install, configure, use, and troubleshoot your Micro810® controller.

Micro820 Programmable Controllers User Manual, publication 2080-UM005 Describes how to install, configure, use, and troubleshoot your Micro820 controller.

Micro830, Micro850, and Micro870 Programmable Controllers User Manual,

publication 2080-UM002 Describes how to install, configure, use, and troubleshoot your Micro830®, Micro850, and

Micro870® controllers.

Micro800 Expansion I/O Modules User Manual, publication 2080-UM003 Describes how to install, configure, use, and troubleshoot your Micro800 expansion I/O

modules

8Rockwell Automation Publication 2080-QS004C-EN-E - October 2023

Preface

Micro800 Plug-in Modules User Manual, publication 2080-UM004 Describes how to install, configure, use, and troubleshoot your Micro800 plug-in modules.

Micro800 Programmable Controllers General Instructions Reference Manual,

publication 2080-RM001 Provides reference information about the instruction set available for developing programs

for use in Micro800 control systems.

PanelView 800 HMI Terminals User Manual, publication 2711R-UM001 Provides information on how to configure, use, and troubleshoot your PanelView 800 HMI

terminal.

EtherNet/IP Network Devices User Manual, publication ENET-UM006 Describes how to configure and use EtherNet/IP™ devices to communicate on the

EtherNet/IP network.

Ethernet Reference Manual, publication ENET-RM002 Describes basic Ethernet concepts, infrastructure components, and infrastructure features.

System Security Design Guidelines Reference Manual,

publication SECURE-RM001

Provides guidance on how to conduct security assessments, implement Rockwell

Automation products in a secure system, harden the control system, manage user access,

and dispose of equipment.

Industrial Components Preventive Maintenance, Enclosures, and Contact

Ratings Specifications, publication IC-TD002 Provides a quick reference tool for Allen-Bradley industrial automation controls and

assemblies.

Safety Guidelines for the Application, Installation, and Maintenance of

Solid-state Control, publication SGI-1.1

Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides

general guidelines for the application, installation, and maintenance of solid-state control in

the form of individual devices or packaged assemblies incorporating solid-state

components.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, rok.auto/certifications Provides declarations of conformity, certificates, and other certification details.

Additional Resources (Continued)

Resource Description

Rockwell Automation Publication 2080-QS004C-EN-E - October 2023 9

Where to Start

Follow this workflow to learn how to use the Connected Components Workbench software with your Micro800 controllers and

PanelView 800 terminals.

Chapter 1

Study Guide Overview

Chapter 2

Hands-on Content

Chapter 3

Create and Save a Connected

Components Workbench Project

Chapter 4

Build and Download Project

Chapter 5

Connect the Input Simulator Board

Chapter 6

Monitor Your Micro800 Controller Program

Chapter 7

How to Create Variables

Chapter 8

How to Implement an Instruction Block

Chapter 9

How to Add a Plug-in Module

Chapter 10

Learn About User-defined Functions

and User-defined Function Blocks

Chapter 11

Import and Export Project

Chapter 12

Quick Tips

Chapter 13

PanelView 800 Graphic Terminal Design

in Connected Components Workbench

Software

Chapter 14

Using HMI Tags

Chapter 15

Configure Micro800 Controller

Ethernet Settings

Chapter 16

HMI Tag Editor

Chapter 17

HMI Screen

Chapter 18

Configure PanelView 800 Terminal

Ethernet Settings

Chapter 19

Download HMI Application

Chapter 20

Test the HMI Application

10 Rockwell Automation Publication 2080-QS004C-EN-E - October 2023

Where to Start

Notes:

Andere Handbücher für Allen-Bradley Micro800

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 23PFC Bedienungsanleitung

Rockwell Automation

Rockwell Automation Micro830 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1502 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ArmorStart Bulletin 280G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix5000 Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro820 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1400 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769 CompactLogix Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation powerflex 4 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L23E-QB1B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LiquiFlo 2.0 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley DriveLogix 5730 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1785 PLC-5 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1756-L1 Bedienungsanleitung

Rockwell Automation

Rockwell Automation MPMA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 150-E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley OneGear Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-PLUS Bulletin 150 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch