Rockwell Automation Allen-Bradley PowerFlex Series Bedienungsanleitung

PowerFlex Compact-class AC Drives on Modbus Building Block

Connected Components Accelerator Toolkit

Quick Start

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required

to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the

use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

Allen-Bradley, Connected Components Workbench, Micro800, Micro830, Micro850, PanelView, PowerFlex, SCANport, Stratix 2000, RSLinx, Rockwell Software, and Rockwell Automation are trademarks of Rockwell

Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT

Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication CC-QS034C-EN-P - March 2015 3

Where to Start

Follow this path to complete your building block project.

Chapter 1 - PowerFlex Compact-class AC Drive Setup

Chapter 2 - System Validation

Read the Getting Started CCAT with

System Design Assistant Quick

Start, publication CC-QS035

4Rockwell Automation Publication CC-QS034C-EN-P - March 2015

Where to Start

Notes:

Rockwell Automation Publication CC-QS034C-EN-P - March 2015 5

Table of Contents

Preface

About This Publication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Available Connected Components Accelerator Toolkits . . . . . . . . . . . . . . 9

For More Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 1

PowerFlex Compact-class AC Drive

Setup

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Follow These Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configure Your Personal Computer and PowerFlex Drive Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect to Your Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Configure Your Drive by Using Connected Components Workbench

Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Chapter 2

System Validation

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Follow These Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Review the System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Configure the Controller Communication Ports . . . . . . . . . . . . . . . . . . . 30

Configure PanelView 800 Terminal Communication Settings . . . . . . . 35

Connect Your Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Download Your Program to the Controller . . . . . . . . . . . . . . . . . . . . . . . . 37

Configure the IP Address for Your PanelView 800 Terminal . . . . . . . . 40

Transfer Your HMI Application to the PanelView 800 Terminal . . . . 40

Validate Your System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Understand the Machine Functions Screen . . . . . . . . . . . . . . . . . . . . . 42

Understand the Status and Command Screen. . . . . . . . . . . . . . . . . . . 43

Verify the Manual Operation of the Drive . . . . . . . . . . . . . . . . . . . . . . 45

Verify Operation of the Fault Help Screen. . . . . . . . . . . . . . . . . . . . . . 45

Appendix A

PowerFlex Compact-class User-

defined Function Block

RA_PFx_MODBUS_STS_CMD User-defined Function Block . . . . . 47

Appendix B

Global Variables

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6Rockwell Automation Publication CC-QS034C-EN-P - March 2015

Table of Contents

Rockwell Automation Publication CC-QS034C-EN-P - March 2015 7

Preface

About This Publication

This quick start provides instructions for implementing a PowerFlex® Compact-class (523, 525, 4, 4M, 40, 40P, 400) AC

drive speed-control application on Modbus by using the Connected Components Workbench™ software and a Micro800®

programmable logic controller (PLC).

To help with the design and installation of your system, application files and other information are provided on the

Connected Components Accelerator Toolkit (CCAT). The CCAT provides bills of materials (BOM), CAD drawings for

panel layout and wiring, control programs, human-machine interface (HMI) screens, and more. With these tools and the

built-in best-practices design, you are free to focus on the design of your machine control and not on design overhead tasks.

The CCAT is available on the Connected Components Accelerator Toolkit DVD, publication CC-QR002, or through

the Rockwell Automation Software Download and Registration System (SDRS) site at

http://www.rockwellautomation.com/rockwellautomation/products-technologies/connected-components/tools/

accelerator-toolkit.page

The beginning of each chapter contains the following information. Read these sections carefully before you begin work in

each chapter:

•Before You Begin - The chapters in this quick start do not have to be completed in the order in which they appear.

However, this section defines the minimum amount of preparation that is required before completing the current

chapter.

•What You Need - This section lists the tools that are required to complete the steps in the current chapter,

including, but not limited to, hardware and software.

•Follow These Steps - This section illustrates the steps in the current chapter and identifies the steps that are required

to complete the examples.

8Rockwell Automation Publication CC-QS034C-EN-P - March 2015

Preface

Terminology

Term (abbreviation) Definition

Application Sequence Programs User-modified programs that work together with the standard-state machine logic to control what the machine does

while in the abort, clear, reset, run, and stop states.

Auto/manual operation When the PanelView™ 800 terminal is in Auto mode, the controller logic controls the machine and monitors machine

status.

When the PanelView 800 terminal switches to Manual mode, the terminal takes over control. Command buttons and

numeric entry fields are available only when the machine is in Manual mode.

Bill of Materials (BOM) A list of components that are needed for your system.

Building block (BB) Tools for accelerating and simplifying the development of a Micro800 controller-based application. A typical building block

includes a starting Bill of Material (BOM), Computer-Aided Design (CAD) drawings, Micro800 controller programs,

PanelView 800 terminal applications, and a quick start document.

Computer-Aided Design (CAD) A computer-based system that is developed to facilitate design of mechanical parts.

Connected Components Accelerator Toolkit (CCAT) Software with application files and other information to speed the design and startup of component-based machines.

Connected Components Workbench Software environment for configuring or programming Micro800 controllers, PanelView 800 terminals, PowerFlex drives,

and other component-level products.

Connected Components Workbench project A project consists of one or more of the following:

• Micro800 controller configuration

• Up to 256 Micro800 programs, each with program local variables

• Micro800 global variables

• PanelView 800 terminal application

• PowerFlex drive parameter lists

Global variables Project variables that any program can access, including all I/O and system variables.

State Machine control code Machine logic for coordinating overall machine operation that is based on states. The state machine broadcasts commands

and receives feedback information from each of the building blocks via user-modified application sequence programs.

Tags A PanelView 800 term for variables.

User-defined Function Blocks (UDFBs) Function block instructions that can be used like standard function block instructions within any Connected Components

Workbench programming language. Anyone using Connected Components Workbench software can write these functions

blocks. Many UDFBs are posted on the Rockwell Automation sample code website:

http://samplecode.rockwellautomation.com/idc/groups/public/documents/webassets/sc_home_page.hcst.

User-defined Object (UDO) A collection of PanelView 800 terminal screen objects that can be pasted into a new screen.

Rockwell Automation Publication CC-QS034C-EN-P - March 2015 9

Preface

Available Connected Components Accelerator Toolkits

For the most up-to-date listing of available Connected Components Accelerator Toolkits and related quick starts, refer to

these resources:

• Rockwell Automation Connected Components Accelerator Toolkit website at

http://www.rockwellautomation.com/rockwellautomation/products-technologies/connected-components/tools/

accelerator-toolkit.page

• Connected Components Accelerator Toolkit Building Block Project Descriptions Quick Reference,

publication CC-QR003

For More Information

These resources contain information about related products from Rockwell Automation.

You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of

technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.

Resource Description

Micro830® and Micro850® Programmable Controllers User

Manual, publication 2080-UM002

Provides a reference guide for Micro830 and 850 controller systems. This publication also contains procedures on

how to install, wire, and troubleshoot your controller.

Micro800® Digital and Analog Plug-in Modules and Accessories

User Manual, publication 2080-UM004

Provides an overview and procedures for installing, wiring, and troubleshooting Micro800 plug-in modules and

accessories.

Micro820® 20-point Programmable Controllers User Manual,

publication 2080-UM005

Provides a reference guide for Micro820 controller systems. It also contains procedures on how to install, wire,

and troubleshoot your controller.

PanelView 800 HMI Terminals User Manual, publication

2711R-UM001

Provides information for configuring the PanelView 800 terminal.

PowerFlex 520-Series Adjustable Frequency AC Drive User

Manual, publication 520-UM001

Provides you with the basic information required to install, start up, and troubleshoot the PowerFlex 520-Series

adjustable-frequency AC drives.

PowerFlex 4 Adjustable Frequency AC Drive, Firmware Version

6.xx, User Manual, publication 22A-UM001

Provides you with the basic information required to install, start-up, and troubleshoot the PowerFlex 4

adjustable-frequency AC drive.

PowerFlex 4M Adjustable Frequency AC Drive, Firmware Versions

1.xx…2.xx, User Manual, publication 22F-UM001

Provides you with the basic information required to install, start-up, and troubleshoot the PowerFlex 4M

adjustable-frequency AC drive.

PowerFlex 40 Adjustable Frequency AC Drive, Firmware Versions

1.xx…6.xx, publication 22B-UM001

Provides you with the basic information required to install, start-up, and troubleshoot the PowerFlex 40

adjustable frequency AC drive.

PowerFlex 40P Adjustable Frequency AC Drive, Firmware Versions

1.xx…3.xx, publication 22D-UM001

Provides you with the basic information required to install, start-up, and troubleshoot the PowerFlex 40P

adjustable frequency AC drive.

PowerFlex 400 Adjustable Frequency AC Drive, Firmware Versions

1.xx…7.xx, publication 22C-UM001

Provides you with the basic information required to install, start-up, and troubleshoot the PowerFlex 400P

adjustable frequency AC drive.

10 Rockwell Automation Publication CC-QS034C-EN-P - March 2015

Preface

Notes:

Andere Handbücher für Allen-Bradley PowerFlex Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation SMC Dialog Plus Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-50 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation SLC 500 Thermocouple Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 750-Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Samsung NX70 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ics triplex AADvance Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley LiquiFlo 2.0 Bedienungsanleitung

Rockwell Automation

Rockwell Automation External Dynamic Brake Kit Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Dialog Plus 1503D Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro820 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756 ControlLogix Betriebsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-Flex 150 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 525 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ArmorStart Bulletin 280G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Micro830 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster 440G-MZ Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch