Rockwell Automation Allen-Bradley 7703E Bedienungsanleitung

Medium Voltage SMC OEM Components, 10…15 kV

Bulletin Number 7703E

Installation Instructions

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information aboutpractices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successfulapplication and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURNHAZARD:Labels may be onor inside theequipment, for example, adriveormotor,toalert peoplethatsurfacesmay

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potentialArcFlash.ArcFlashwillcausesevereinjuryor death.WearproperPersonalProtectiveEquipment(PPE).FollowALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019 3

TableofContents

Preface

Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 1

Receiving and General

Information Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Handling Procedures for Electrostatic Sensitive Devices . . . . . . . . . . . 7

Standards and Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2

PowerBrick Installation Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Sizing the Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Torque Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PowerBrick Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Typical Mounting, 10…12 kV PowerBrick System . . . . . . . . . . . . . . . 13

Typical Mounting, 12.1…14.4 kV PowerBrick System. . . . . . . . . . . . 14

Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PowerBrick Operating Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Voltage Sensing Board Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Mounting and Connecting the Voltage Sensing Board. . . . . . . . . . . . 17

Current Loop Gate Drive Power Assembly (CLGD) . . . . . . . . . . . . . 19

Chapter 3

ControlComponentInstallation Interface Board Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Interface Board Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SMC-50 Control Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

EMC Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Control Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Control Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Control Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Control Terminal Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting Interface Board to Voltage Sensing Board. . . . . . . . . . . . 28

Connecting Fiber Optic Multiplexer Board to Gate Driver Board . 29

Additional Control Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 4

Main and Bypass Switching

Device Installation Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Main Contactor or Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Bypass Contactor or Circuit Breaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019

Table of Contents

Chapter 5

Typical Wiring Diagrams Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Chapter 6

Final Test Procedures Final Test Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Dielectric Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Additional Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Medium Voltage SMC-50 Module. . . . . . . . . . . . . . . . . . . . . . . . . . 37

Voltage Sensing Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Power Supply Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Start-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Appendix A

Component Deratings Deratings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Appendix B

Typical Schematic Diagrams Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Appendix C

Spare Parts PowerBricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019 5

Preface

Summary of Changes

Scope This document pertains to the Bulletin 7703E SMC OEM components for

10…15 kV. These components allow an OEM to fabricate a medium voltage soft

starting solution.

Most of the components described herein are provided in various 7703E kits;

however, some of the devices described are not provided. These must be acquired

separately.

A key part of the Bulletin 7703E components is the power stack assembly which

uses PowerBrick™ technology. PowerBricks are a superior means of packaging

SCRs, heatsinks, passive devices (for circuit protection) and gate drive circuit

boards. Each PowerBrick is a self-contained assembly with inherent insulation

and flexible mounting features. PowerBricks are easily connected in series to

service the required system voltage level.

PowerBricks are provided as a set of components used to create a three-phase

assembly (refer to Figure 1 on page 9). Each form of PowerBrick assembly is

applied with other Bulletin 7703E control components and power devices, in

forming a complete solution.

Topic Page

Replaced all references from SMC Flex to SMC-50 Throughout

Changed MV Ratio parameter number to 169 18, 37

Replaced dimensions graphic to show updated SMC-50 board 23

Replaced SMC Flex interface board graphic with SMC-50 24

Updated control terminal designations and descriptions 27

Replaced multiplexer board graphic 29

Replaced typical power circuit wiring diagram to reflect SMC-50 interface board 34

Replaced typical power system diagram to reflect SMC-50 interface board 46

replaced typical control circuit graphic to reflect SMC-50 interface board 47

6Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019

Preface

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/global/literature-library/overview.page.

Resource Description

CENTERLINE MediumVoltage SMC-50 Motor Controller

user manual, publication 1560F-UM001 Provides information on installing, commissioning,

operation, programming, troubleshooting, and

parameter information for MV SMC-50 controllers

Industrial AutomationWiring and Grounding Guidelines,

publication 1770-4.1 Provides general guidelines for installing a Rockwell

Automation industrial system.

Product Certifications website: rok.auto/certifications Provides declarations of conformity, certificates, and

other certification details.

Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019 7

Chapter 1

Receiving and General Information

Receiving See Getting Started, General Handling Procedures for Medium Voltage

Controllers, publication MV-QS050. This document is included with your

shipment and contains information regarding receiving, unpacking, initial

inspection, handling, storage, and site preparation.

Handling Procedures for

Electrostatic Sensitive

Devices

To guard against electrostatic damage (ESD) to equipment, the following

precautions should be observed when handling electrostatic sensitive devices.

1. Use a grounding wrist strap to minimize the build up of static charges on

personnel.

2. Handle the module by the edges and avoid touching components or

printed circuit paths.

3. Store devices with sensitive components in the conductive packaging that

the module is shipped in.

These precautions are the minimum requirements for guarding against ESD. For

more information, see Guarding Against Electrostatic Damage, publication

8000-4.5.2.

Standards and Codes

•CEC(CanadianElectricalCode)

• CSA 22.2 No. 253 (Canadian Standards Association) – Medium Voltage

AC Contactors, Controllers and Control Centers

• NEC (National Electrical Code)

• NEMA ICS Standards (National Electrical Manufacturers’ Association)

ATTENTION: Printed circuitboards contain components that can be damaged

by electrostatic charges that build upon personnel during normal activities.

Exercise the following precautions when handling electrostaticsensitive

devices.Failure to do so may damage the device andrender it inoperable.

IMPORTANT It is recommended that the user be familiar with the following safety and

design standards and codes, and any additional local codesthat a medium

voltage controller must comply with:

8Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019

Chapter 1 Receiving and General Information

• OSHA (Occupational Safety and Health Administration)

• UL 50 (Underwriters Laboratories) – Enclosures for Electrical Equipment

• UL 347B (Underwriters Laboratories) – Medium Voltage Motor

Controllers

• UL 508 (Underwriters Laboratories) – Industrial Control Equipment

• IEC 60204-1 – Safety of Machinery – Electrical Equipment of Machines,

Part 1: General Requirements

• IEC 62271-200 – AC Metal Enclosed Switchgear and Control Gear for

Rated Voltages Above 1kV and up to 52 kV (formerly IEC 60298)

• IEC 62271-106 – High Voltage Alternating Current Contactors (formerly

IEC 604701

• IEC 60529 – Degrees of Protection Provided by Enclosures (IP Code)

• IEC 62271-1 – Common Clauses for High Voltage Switchgear and

Control Gear Standards

• ICS1– Industrial Control and Systems General Requirements

• ICS3 Part 2 – Industrial Control and Systems - Medium Voltage

Controllers Rated 2001-7200V AC

Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019 9

Chapter 2

PowerBrick Installation

Identification A PowerBrick™ is shown in Figure 1.

Figure 1 - Single-phase PowerBrick

Several PowerBricks are supplied as a loose set of components to service a

particular voltage and current. Verify the voltage and current rating of the OEM

power stacks by examining the shipping label and referencing it to the

information in Table 1.

Table 1 - PowerBrick Options and Catalog Numbers

Catalog Number(1)

(1) The OEM is responsible for ordering and installing the correct format for the current loop gate drive conductor conduit/CT assembly

(refer to the Installation Instructions, publication 7703E-IN008 for additional details.)

Voltage(2)

(2) Voltage ranges: 12000 = 10000…12000V (5 PowerBricks in series per phase)

13800 = 12001…14400V (6 PowerBricks in series per phase)

Current (A)

7703E-PPMT 12,000V 3 PH, 50/60 Hz 160

7703E-PPMA 340

7703E-PPMC 580

7703E-PPNT 13,800V 160

7703E-PPNA 340

7703E-PPNC 580

10 Rockwell Automation Publication 7703E-IN001F-EN-P - July 2019

Chapter 2 PowerBrick Installation

In addition to the PowerBricks, a voltage sensing board is to be connected in the

power circuit. Table 2 lists the voltage sensing board catalog numbers.

Table 2 - Voltage Sensing Board Catalog Number

Sizing the Enclosure

Use the data in Table 3 to assist in calculating the enclosure size.

Table 3 - PowerBrick Specifications

Dimensions See Figure 2, Figure 3, and Figure 4 for PowerBrick dimensions and mounting.

Catalog Number Voltage Sensing Board Input (3 PH, 50/60 Hz)

7703E-VSM 10,000…12,000V

7703E-VSN 12,001…14,400V

ATTENTION: The enclosure for the power stack assemblies must be adequately

sized to provide sufficient airflow to cool the units. Failure to provide adequate

cooling may result in reduced duty cycles or component failure.

Description 160 A, 340 A

InputVoltages

(50/60 Hz)

10,000…12,000V

12,001…14,400V

3 phase, +10%, -15%

AmbientTemperature 0 °C…40 °C (32 °F…104 °F)

Power Section

(for 3 phases)

30 SCR at 10…12 kV

36 SCR at 12.1…14.4 kV

Repetitive Peak Inverse

Voltage Rating 10 to12 kV…32,500 PIV

12.1…14.4 kV…39,000 PIV

Thermal Capacity(1) 600% of FLA, 10 s

450% of FLA, 30 s

dv/dt Protection R.C. Snubber Network

Maximum Heat

Dissipation (kW) Start or Stop Cycle (at 450% FLA)

160 A 340 A 580 A Continuous(2)

10,000…12,000V 27 57 98 0.5

12,001…14,400V 32 69 117 0.5

Altitude 0…1000 m (0…3,300 ft)

(See Controller DeratingsTable on page 6, publication 1503-BR010F)

Net ShippingWeight

(3 PH)

Rating (kV) 10…12 12.1…14.4

Weight kg (lb) 570 (1260) 684 (1512)

(1) It may be possible to offer extended start times at reduced current or ambient temperature. Please consult Rockwell Automation factory for assistance.

(2) After bypass contactor/breaker is closed.

Inhaltsverzeichnis

Andere Rockwell Automation Industrieanlagen Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 755T Flux Vector... Bedienungsanleitung

Rockwell Automation

Rockwell Automation MagneMotion MagneMover LITE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance Electric SR3000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1732E-IT4IM12R Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 6189V-BOOKBRKT Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley VersaVirtual Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex AFE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 194U Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Bulletin 2364E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Discrete Machine Performance Solution Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CrossBoard 141C-NFD Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1771-IFMS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-G-RMB Bedienungsanleitung

Rockwell Automation

Rockwell Automation THR Triguard SC300E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster Minotaur MSR178DP Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster GuardShield 440L-AGST... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20P Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster GuardShield450L Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1719 Ex I/O Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LDAT-S03 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster MSR124RT Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung