Rockwell Automation Allen-Bradley 1606-XLE240E-3 Bedienungsanleitung

Power Supply - 24V, 10 A, 240 W, Three-phase Input

Catalog Number 1606-XLE240E-3

Reference Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information aboutpractices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successfulapplication and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURNHAZARD:Labels may be onor inside theequipment, for example, adriveormotor,toalert peoplethatsurfacesmay

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potentialArcFlash.ArcFlashwillcausesevereinjuryor death.WearproperPersonalProtectiveEquipment(PPE).FollowALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1606-RM002A-EN-P - March 2019 3

Power Supply - 24V, 10 A, 240 W, Three-phase Input

Table of Contents

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/global/literature-library/overview.page.

To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Terminology and

Abbreviations

Topic Page Topic Page

Additional Resources 3 ConnectionTerminals 14

Terminology and Abbreviations 3 Lifetime Expectancy and Mean Time between

Failure 15

Product Overview 4 EMC 16

Installation Notes 6 Environment 17

AC Input 8 Protection Features 18

DC Input 9 Safety Features 18

Input Inrush Current 9 Dielectric Strength 19

DC Output 10 Standards Compliance and Approvals 20

Hold-upTime 11 Approximate Dimensions andWeight 21

Efficiency and Power Loss 12 Accessories 22

Functional Diagram 13 Application Notes 23

Front Side and User Elements 13

Resource Description

1606-XLPower SupplyTechnical Data,

publication 1606-TD001 Provides specifications and certifications for the

1606-XL240E-3 power supply.

Industrial AutomationWiring and Grounding Guidelines,

publication 1770-4.1 Provides general guidelines for installing a Rockwell

Automation® industrial system.

Product Certifications website,rok.auto/certifications Provides declarations of conformity, certificates, and

other certification details.

Term Definition

PE and symbol PE is the abbreviation for Protective Earth and has the same meaning as the symbol.

Earth, Ground This document uses the term‘earth’which is the same as the U.S. term‘ground.’

4000V AC A figure with the unit (V AC) at the end isa momentary figure without any additional

tolerances included.

50 Hz vs. 60 Hz As long as not otherwise stated, AC 100V and AC 230V parameters are valid at 50 Hz mains

frequency. AC 120V parameters are valid for 60 Hz mains frequency.

4Rockwell Automation Publication 1606-RM002A-EN-P - March 2019

Power Supply - 24V, 10 A, 240 W, Three-phase Input

Product Overview The 1606 Essential line are cost optimized

power supplies without compromising quality,

reliability, and performance. The most

outstanding features of 1606-XLE240E-3 are

the high-efficiency, electronic inrush-current

limitation, active input-transient filter, and

wide-operational temperature range. The small

size is achieved by a synchronous rectification

and further technological design details.

The 1606-XLE240E-3 is equipped with

conformal coated circuit-boards that are

preferred for applications in harsh areas.

The 1606 Essential line includes all essential

basic functions. The devices have a power

reserve of 20% included, which may even be

used continuously at temperatures up to

45 °C (113 °F). Additionally, the

1606-XLE240E-3 can deliver three times the

nominal output current for 10 ms which helps

to trip fuses on faulty output branches.

The power supply features:

• 3x 380…480V AC wide-range input

• 2 or 3-phase operation possible

• Width only 62 mm (0.039 in.)

• Efficiency up to 92.9% due to synchronous rectifier

• Excellent partial load efficiency

• 20% output power reserves

• Easy fuse tripping due to high overload current

• Input-transient blanking circuit included

• Minimal inrush current surge

• Three input fuses included

• Current sharing feature for parallel use

• Full power between -25 °C...+60 °C (-13 °F...+140 °F)

Rockwell Automation Publication 1606-RM002A-EN-P - March 2019 5

Power Supply - 24V, 10 A, 240 W, Three-phase Input

Figure 1 - Main Approvals

See page 20 for a complete list of approvals.

Attribute Description

Outputvoltage

Adjustment range

24V DC

24…28V

Nominal

Factory setting 24.1V

Output current 12.0…10.3 A

10.0…8.6 A

7.5…6.5 A

Below 45 °C (113 °F) ambient

60 °C(140 °F) ambient

70 °C(158 °F) ambient

Derate linearly between 45…70 °C

(113…158 °F)

Input voltage AC

Mains frequency

Input current AC

Power factor

3x 380…480V AC

50…60 Hz

0.7/0.6 A

0.53/0.52 A

-15%/+20%

±6%

3x 400/480V

ACinrush current 4/4 Apk 3x 400/480V

Efficiency

Losses

92.8/92.9%

18.6/18.3W

3x 400/480V

Hold-up time 34/54 ms 3x 400/480V

Temperature range -25…+70 °C(-13…+158 °F) –

Size (W x H x D) 62 x 124 x 117 mm

(2.44 x 4.88 x 4.60 in.)

Without DIN rail

Weight 750 g (1.65 lb) Without DIN rail

IND. CONT. EQ. UL 60950-1

6Rockwell Automation Publication 1606-RM002A-EN-P - March 2019

Power Supply - 24V, 10 A, 240 W, Three-phase Input

Installation Notes

• This device may only be installed and put into operation by qualified

personnel.

• This device does not contain serviceable parts. If damage or malfunction

should occur during installation or operation, immediately turn power off

and send unit to the factory for inspection. The tripping of an internal fuse

is caused by an internal defect.

• Install the device in an enclosure providing protection against electrical,

mechanical, and fire hazards.

• Install the device onto a DIN rail according to EN60715 with the input

terminals on the bottom of the device. Other mounting orientations

require a reduction in output current.

• Make sure that the wiring is correct by following all local and national

codes.

• Use appropriate copper cables that are designed for a minimum operating

temperature of:

– 60 °C (140 °F) for ambient temperatures up to 45 °C (113 °F),

– 75 °C (167 °F) for ambient temperatures up to 60 °C (140 °F),

– and 90 °C (194 °F) for ambient temperatures up to 70 °C (158 °F).

• Verify that all strands of a stranded wire enter the terminal connection.

• Unused screw terminals should be securely tightened.

• The device is designed for pollution degree to areas in controlled

environments. No condensation or frost allowed. The enclosure of the

device provides a degree of protection of IP20.

• The isolation of the device is designed to withstand impulse voltages of

overvoltage category 3 according to IEC 60664-1 for corner grounded

delta systems, the overvoltage category level is reduced to level 2.

ATTENTION: Risk of electrical shock, fire, personal injury, or death.

–Do not use the power supply withoutproper grounding (Protective Earth). Use

theterminalon the input blockforearthconnection and not one of the screwson

the housing.

– Turn power off before working on the device. Protect against inadvertent

repowering.

–Do not modify or repair the unit.

–Do not open the unit as high voltages are presentinside.

–Usecaution to prevent any foreign objects from entering into the housing.

–Donotuseinwetlocationsor in areaswheremoistureorcondensationcanbe

expected.

BURN HAZARD: Do not touch while applying power, and immediatelyafter

turning off the power. Hot surfaces may cause burns.

WARNING: Substitution of componentsmay impair suitability for this

environment.

Do not disconnect the device or operate the voltage adjustment unless power

has been switched off or the area is known to be non-hazardous.

Rockwell Automation Publication 1606-RM002A-EN-P - March 2019 7

Power Supply - 24V, 10 A, 240 W, Three-phase Input

• The device is designed as Class of Protection I equipment according to

IEC 61140.

• Do not use without a proper PE (Protective Earth) connection.

• The device is suitable to be supplied from TN-, TT-, and IT mains

networks. The voltage between the L terminals and the PE terminal must

not exceed 500V AC continuously.

• A disconnecting means shall be provided for the input of the device.

• The device is designed for convection cooling and does not require an

external fan. Do not obstruct airflow and do not cover ventilation grid.

• The device is designed for altitudes up to 6000 m (19,685 ft). See

Environment for use above 2000 m (6560 ft).

• Keep the following minimum installation clearances:

– 40 mm (1.57 in.) on top

– 20 mm (0.78 in.) on the bottom

– 5 mm (0.19 in.) left and right side

• Increase the 5 mm (0.19 in.)...15 mm (0.59 in.) in case the adjacent device

is a heat source. When the device is permanently loaded with less than

50%, the 5 mm (0.19 in.) can be reduced to zero.

• The device is designed, tested, and approved for branchcircuits up to 32 A

(IEC) and 30 A (UL) without additional protection device. If an external

fuse is utilized, do not use circuit breakers smaller than 6 A

B- or C-Characteristic to avoid a nuisance tripping of the circuit breaker.

• The maximum surrounding air temperature is 70 °C (158 °F). The

operational temperature is the same as the ambient or surrounding air

temperature and is defined 2 cm (7.87 in.) below the device.

• The device is designed to operate in areas between 5% and 95% relative

humidity.

8Rockwell Automation Publication 1606-RM002A-EN-P - March 2019

Power Supply - 24V, 10 A, 240 W, Three-phase Input

AC Input

Attribute 1606-XLE240E-3

AC input Nom 3V AC/380…480V AC –

AC input range Min 3x 323…576V AC Continuous operation

Min 3x 576…700V AC Max 1 s (occasional)

Allowedvoltage L or N to earth Max 500V AC Continuous, IEC 62477-1

Input frequency Nom 50…60 Hz ±6%

Turn-on voltage Typ 3x 260V AC Steady-state value, see Figure 2.

Shut-down voltage Typ 3x 185V AC Steady-state value, see Figure 2.

External input protection See recommendations in Installation Notes.

Attribute 3x 400V AC 3x 480V AC Description

Input current Typ 0.7 A 0.6 A At 24V, 10 A, per phase, see Figure 4.

Power factor(1) Typ 0.53 0.52 At 24V, 10 A, see Figure 5.

Start-up delay Typ 90 ms 90 ms See Figure 3.

Rise time Typ 40 ms 40 ms At 24V, 10 A const. current load, 0mF load capacitance, see Figure 3.

Typ 85 ms 85 ms At 24V, 10 A const. current load, 10mF load capacitance, see Figure 3.

Turn-on overshoot Max 200 mV 200 mV See Figure 3.

(1) The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.

Figure 2 - Input Voltage Range Figure 3 - Turn-on Behavior, Definitions

Turn-on

323V

Rated input

range

VIN

POUT

185V 576V

Shut-down

260V 3x700Vac

< 1s

Start-up

delay Rise

Time

Overshoot

- 5%

Output

Voltage

Input

Voltage

Rockwell Automation Publication 1606-RM002A-EN-P - March 2019 9

Power Supply - 24V, 10 A, 240 W, Three-phase Input

DC Input Do not operate the power supply with DC input voltage.

Input Inrush Current An active inrush limitation circuit limits the input inrush current after turn-on of

the input voltage and after short input voltage interruptions.

The charging current into EMI suppression capacitors is disregarded in the first

microseconds after switch-on.

Figure 6 - Typical Input Inrush Current Behavior at Nominal Load and 25 °C (77 °F) Ambient

Temperature

Figure 4 - Input Current versus Output Load at 24V Figure 5 - Power Factor versus Output Load

Attribute 3x 400V AC 3x 480V AC Description

Inrush

current Max 10 A peak 10 A peak Temperature independent

Typ 4 A peak 4 A peak

Inrush

energy Max 0.5 A2s1.5A

Input current 1A/DIV

Input voltage 500V/DIV

Output voltage

20ms/DIV

10 Rockwell Automation Publication 1606-RM002A-EN-P - March 2019

Power Supply - 24V, 10 A, 240 W, Three-phase Input

DC Output The output provides a SELV/PELV rated voltage, which is galvanically isolated

from the input voltage.

The device is designed to supply any kind of loads, including unlimited capacitive

and inductive loads.

The output is electronically protected against overload, no-load, and short-

circuits. In case of a protection event, audible noise may occur.

Attribute Description

Output voltage Nom 24V DC –

Adjustment range Min 24…28V AC Guaranteed

Max 30V At clockwise end position of potentiometer.

Factory settings Typ 24.1V ±0.2%, in single use at fullload, cold unit

Typ 24.1V ±0.2%, in parallel use at full load, cold unit (results

to 23.9V ±0.7% at 12 A and 25V ±0.2% at no load)

Line regulation Max 10 mV 3 x 323…3 x 576V AC input voltage change

Load regulation Max 100 mV Static value, 0A…10 A single use mode, static value

Typ 1000 mV Static value, 0 A…10 A parallel use mode, static

value, see Figure 8.

Ripple and noise

voltage Max 50 mVpp 20 Hz…20 MHz, 50 Ohms

Output current Nom 12 A(1)

(1) This current is also available for temperatures up to 70 °C (158 °F) with a duty cycle of 10% and/or not longer than 1 minute every

10 minutes.

At 24V, below 45 °C (113 °F) ambient temperature.

10 A At 24V, below 60 °C (140 °F) ambient temperature.

7.5 A At 24V, at 70 °C (158 °F) ambient temperature.

10.3 A(1) At 8V, and an ambient temperature below

45 °C (113 °F).

8.6 A At 28V, at 60 °C (140 °F) ambient temperature.

6.5 A At 28V, at 70 °C (158 °F) ambient temperature.

– Reduce output current linearly between 45 °C…70 °C

(113 °F…158 °F).

Fuse breakingcurrent Typ 23 A Up to 20 ms once every 5 seconds, see Figure 7.The

fuse breaking is an enhanced transient current,

which helps to trip fuses on faulty output branches.

The output voltage stays above 40V.

Overload behavior – Continuous current See Figure 7.

Overload/Short Circuit

current Max 23 A Continuous current. See Figure 7.

Output capacitance Typ 6500 μF Included inside the power supply.

Back-feeding loads Max 35V The unit is resistant and does not show

malfunctioning when a load feeds back voltage to

the power supply. It does not matter whether the

power supply is on or off. The absorbing energy can

be calculated according to the built-in large sized

output capacitor.

Inhaltsverzeichnis

Andere Rockwell Automation Stromversorgung Handbücher

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE960 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLEDNET3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480ERL Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS80E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE192BM Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 104-C60 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120F Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS480 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XL Betriebsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS80E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLERED20 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240ERL SER B Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS960 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex SCR Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro800 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 5700 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240EC Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLP60EQ Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS960 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS960EE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-PA2 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung