Rockwell Automation Allen-Bradley 1606-XLE192BM Bedienungsanleitung

Power Supply - 12V, 16 A,

192 W, Single-phase Input

Catalog Numbers 1606-XLE192BM, 1606-XLE192BDM

Reference Manual Original Instructions

2Rockwell Automation Publication 1606-RM113A-EN-P - September 2020

Power Supply - 12V, 16 A, 192 W, Single-phase Input Reference Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize

themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to

be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use

or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1606-RM113A-EN-P - September 2020 3

Table of Contents

Terminology and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Catalog Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

AC Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

DC Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Input Inrush Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hold-up Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

DC OK Relay Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remote ON/OFF Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Efficiency and Power Losses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Lifetime Expectancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mean Time Between Failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Terminals and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Daisy Chaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Front Side and User Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Protection Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Safety Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dielectric Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Other Fulfilled Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Physical Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Wall or Panel Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Side Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1606-XLSRED4HE Redundancy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Peak Current Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Back-feeding Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

External Input Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Output Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Parallel Use To Increase Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Parallel Use for Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Series Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Inductive and Capacitive Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Charging of Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Operation on Two Phases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Use In a Tightly Sealed Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Mounting Orientations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4Rockwell Automation Publication 1606-RM113A-EN-P - September 2020

Notes:

Rockwell Automation Publication 1606-RM113A-EN-P - September 2020 5

Terminology and

Abbreviations

All parameters in this document are typical values that are specified under the

following conditions unless otherwise noted:

•230VAC,50Hzinputvoltage

• 12V, 16 A output

• 25 °C (77 °F) ambient temperature

• after a 5 minutes run-in time

Product Overview

The 1606-XLE192BM and 1606-XLE192BDM are high-end power supplies that

fall in a medium price range without compromising quality, reliability, or

performance. These units offer high efficiency, advanced inrush current

limitation, active power factor correction (PFC), and a wide operational

temperature range.

1606-XLE192BM and 1606-XLE192BDM offer the essential basic functions of a

power supply. They have a power reserve of 20% included, which can even be

used continuously at temperatures up to 45 °C (113 °F). They can deliver three

times the nominal output current for at least 12 ms, which helps to trip fuses

on faulty output branches.

Terms Descriptions

PE The abbreviation for Protective Earth. PE has the same meaning as the symbol.

The symbol for Protective Earth.

Earth, Ground This document uses the term “earth” which is the same as the U.S. term “ground”.

AC 230V A value that is displayed with the AC or DC before the value represents a nominal

voltage with standard tolerances (usually ±15%) included. For example, DC 12V

describes a 12V battery disregarding whether it is full (13.7V) or flat (10V).

230V AC A value with the unit (V AC) at the end is a momentary value without any additional

tolerances included.

50 Hz versus 60 Hz As long as not otherwise stated, AC 100V and AC 230V parameters are valid at 50 Hz

mains frequency. AC 120V parameters are valid for 60 Hz mains frequency.

nom Indicates a nominal value.

typ Indicates a typical value.

— (alone in table cell) A dash alone in a table cell indicates that there is no information to be included in that

cell.

Figure 1 - 1606-XLE192BM Power Supply Figure 2 - 1606-XLE192BDM Power Supply

6Rockwell Automation Publication 1606-RM113A-EN-P - September 2020

These units are suitable for a wide variety of applications due to their high

immunity to transients and power surges, low electromagnetic emission, shut-

down input, DC OK relay contact, and large international approval package.

Product features:

• AC 100…240V wide-range input

• Width only 39 mm (1.54 in.)

• Efficiency up to 94.3%

• Excellent partial load efficiency

• 20% output power reserves

• Safe HiccupPLUS Overload mode

• Easy fuse breaking due to high overload peak current

• Active power factor correction (PFC)

• Minimal inrush current surge

• Full power between -25…+60 °C (-13…+140 °F)

• Remote ON / OFF function

•DCOKrelaycontact

Specifications

Catalog Numbers

Attributes Values Notes

Output voltage DC 12V Nominal

Adjustment range 12…15V DC Factory setting 12.0V

Output current

19.2…15.4 A Below 45 °C (113 °F) ambient

16.0…12.8 A At 60 °C (140 °F) ambient

12.0…9.6 A At 70 °C (158 °F) ambient

Derate linearly between 45…70 °C (113…158 °F)

Input voltage AC AC 100…240V

-15%

+10%

Mains frequency 50…60 Hz ±6%

Input current AC 1.74 / 0.92 A

At 120

230V AC

Power factor 0.99 / 0.96

At 120

230V AC

Input voltage DC DC 110…150V ±20% For 1606-XLE192BM

DC 110…300V ±20% For 1606-XLE192BDM

Input current DC

1.90 A At 110V DC

1.38 A At 150V DC

0.68 A At 300V DC

Input inrush current

9 A

peak

At 120

230V AC, 40 °C (104 °F)

Efficiency

92.8

94.3% At 120

230V AC

Losses 14.9 / 11.6 W

At 120

230V AC

Hold-up time 50 ms —

Temperature range -25…+70 °C (-13…+158 °F) —

Size (w x h x d) 39 x 124 x 117 mm

(1.54 x 4.88 x 4.6 in.) Without DIN rail

Weight

600 g (1.3 lb) —

Catalog Numbers Descriptions

1606-XLE192BM Power supply without extended DC input

1606-XLE192BDM Power supply with extended DC input

1606-XLA-S44 Side mount bracket

1606-XLA-XLE Wall or panel mount bracket

Rockwell Automation Publication 1606-RM113A-EN-P - September 2020 7

AC Input

Attributes Values Notes

AC input Nom AC 100…240V Suitable for TN-, TT-, and IT mains networks

AC input range Min 85…264V AC Continuous operation

Min 264…300V AC For 500 ms max

Allowed voltage L or N to earth Max 300V AC Continuous, IEC 62103

Input frequency Nom 50…60 Hz ±6%

Turn-on voltage Typ 80V AC Steady-state value, see Figure 3

Shut-down voltage Typ 70V AC Steady-state value, see Figure 3

Typ 55V AC Dynamic value (250 ms)

External input protection — See recommendations in External Input Protection on page 25.

Attributes Values Notes

AC 100V AC 120V AC 230V

Input current Typ 2.11 A 1.74 A 0.92 A At 12V, 16 A, see Figure 5

Power factor(1) Typ 0.99 0.99 0.96 At 12V, 16 A, see Figure 6

Crest factor(2) Typ 1.5 1.65 1.65 At 12V, 16 A

Startup delay Typ 300 ms 290 ms 240 ms See Figure 4

Rise time Typ 18 ms 18 ms 18 ms At 12V, 16 A constant current load, 0 mF load capacitance, see Figure 4

Typ 35 ms 35 ms 35 ms At 12V, 16 A constant current load, 16 mF load capacitance, see Figure 4

Turn-on overshoot Max 200 mV 200 mV 200 mV See Figure 4

(1) The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.

(2) The crest factor is the mathematical ratio of the peak value to RMS value of the input current waveform.

Figure 3 - Input Voltage Range Figure 4 - Turn-on Behavior, Definitions

Turn-on

85V

Rated

input range

500 ms max

OUT

300V AC264V

Shut-down

Start-up

delay Rise

Time

Ove rshoot

- 5%

Output

Voltage

Input

Voltage

Figure 5 - Input Current Versus Output Current at 12V Output Voltage Figure 6 - Power Factor Versus Output Current at 12V Output Voltage

20 A

0.5

1.0

1.5

2.0

2.5

3 A

Input Current, typ

Output Current

a) 100V AC

b) 120V AC

c) 230V AC

(a)

(b)

(c)

161412108

Power Factor, typ

2 4 6 8 10 12 20 A

0.75

0.8

0.85

0.9

0.95

1.0

Output Current

14 18

(a)

(b)

(c)

(a) 100V AC

(b) 120V AC

8Rockwell Automation Publication 1606-RM113A-EN-P - September 2020

DC Input

Figure 7 - Wiring for DC Input

Instructions for DC use:

• Use a battery or a similar DC source. A supply from the intermediate DC

bus of a frequency converter is not recommended and can cause a

malfunction or damage the unit.

• Connect + pole to L and – pole to N.

• Connect the PE terminal to an earth wire or to the machine ground.

Attributes Values Notes

Input voltage DC Nom DC 110…150V ±20% For 1606-XLE192BM

Nom DC 110…300V ±20% For 1606-XLE192BDM

Input voltage range DC Min 88…180V DC For 1606-XLE192BM

Min 88…360V DC For 1606-XLE192BDM

DC input current

Typ 1.90 A At 110V DC, 12V, 16 A

Typ 1.38 A At 150V DC, 12V, 16 A

Typ 0.68 A At 300V DC, 12V, 16 A

Allowed voltage L/N to earth Max 375V DC Continuous, IEC 62477-1

Turn-on voltage Typ 80V DC Steady state value

Shut-down voltage Typ 70V DC Steady state value

Typ 55V AC Dynamic value (250 ms)

Load

Power Supply

Battery

Rockwell Automation Publication 1606-RM113A-EN-P - September 2020 9

Input Inrush Current An active inrush limitation circuit (NTCs, which are bypassed by a relay

contact) limits the input inrush current after turn-on of the input voltage.

The charging current into EMI suppression capacitors is disregarded in the

first microseconds after switch-on.

Figure 8 - Typical Turn-on Behavior at Nominal Load, 120V AC Input, and 25 °C (77 °F) Ambient

Figure 9 - Typical Turn-on Behavior at Nominal Load, 230V AC Input, and 25 °C (77 °F) Ambient

Attributes Values Notes

AC 100V AC 120V AC 230V

Inrush current

Max 11 Apeak 7 Apeak 11 Apeak At 40 °C (104 °F), cold start

Typ 9 Apeak 6 Apeak 6 Apeak At 25 °C (77 °F), cold start

Typ 9 Apeak 6 Apeak 9 Apeak At 40 °C (104 °F), cold start

Inrush energy Max 0.1 A2s0.1A

2s0.4A

2s At 40 °C (104 °F), cold start

50 ms/DIV

Input current

2 A/DIV

Input voltage

250V/DIV

6 A

Output voltage 10V/DIV

50 ms/DIV

Input current

2 A/DIV

Input voltage

500V/DIV

Output voltage 10V/DIV

6 A

10 Rockwell Automation Publication 1606-RM113A-EN-P - September 2020

Output

Figure 12 - Short-circuit on Output, HiccupPLUS Mode, Typ

Attributes Values Notes

Output voltage Nom 12V DC —

Adjustment range

Min 12…15V DC Guaranteed value

Max 16.5V DC This is the max output voltage that can occur at the clockwise end position of the

potentiometer due to tolerances. It is not guaranteed that this value can be achieved.

Factory settings Typ 12.0V DC ±0.2% At full load and cold unit

Line regulation Max 10 mV Between 85…300V AC

Load regulation Max 50 mV Between 0…19.2 A, static value, see Figure 10

Ripple and noise voltage Max 50 mVpp Bandwidth 20 Hz…20 MHz, 50 Ω

Output current

Nom 19.2 A(1) At 12V and an ambient temperature below 45 °C (113 °F), see Figure 27 on page 18

Nom 16 A At 12V and 60 °C (140 °F) ambient temperature, see Figure 10

Nom 12 A At 12V and 70 °C (158 °F) ambient temperature, see Figure 27 on page 18

Nom 15.4 A(1) At 15V and an ambient temperature below 45 °C (113 °F), see Figure 27 on page 18

Nom 12.8 A At 15V and 60 °C (140 °F) ambient temperature, see Figure 10

Nom 9.6 A At 15V and 70 °C (158 °F) ambient temperature, see Figure 27 on page 18

Typ 48 A For minimal 12 ms once every 5 seconds, see Figure 11. The output voltage stays above

10V. See Peak Current Capability on page 24 for more peak current measurements. For

AC 100V mains, the pulse length is shorter than 12 ms.

Overload behavior — Continuous current Output voltage above 6.5V DC, see Figure 10

—HiccupPLUS mode(2) Output voltage below 6.5V DC, see Figure 10

Short-circuit current

Min 20.5 A(3) Load impedance <30 mΩ, see Figure 12

Max 25.5 A(3) Load impedance <30 mΩ, see Figure 12

Max 7.3 A Average (R.M.S.) current, load impedance 50 mΩ, see Figure 12

Min 50 A Up to 12 ms, load impedance <30 mΩ, see Figure 11

Typ 55 A Up to 12 ms, load impedance <30 mΩ, see Figure 11

Output capacitance Typ 5350 μF Included inside the power supply

(1) Power Boost This power/ current is continuously allowed up to an ambient temperature of 45 °C (113 °F). Above 45 °C (113 °F), do not use this power/

current longer than a duty cycle of 10% and/ or not longer than 1 minute every 10 minutes.

(2) HiccupPLUS mode At heavy overloads (when output voltage falls below 6.5V), the power supply delivers continuous output current for 2 s. After this, the

output is switched off for approx 18 s before a new start attempt is automatically performed. This cycle is repeated as long as the overload exists. If the

overload has been cleared, the device operates normally. See Figure 11.

(3) Discharge current of output capacitors is not included.

Figure 10 - Output Voltage Versus Output Current, Typ Figure 11 - Dynamic Output Current Capability, Typ

Output Voltage

020

16V

35 A10515 25 30

Adjustment

Range

Output Current

Continuous

current

Hiccup

PLUS

mode

Output Voltage

(dynamic behavior, < 12 ms)

16V

80 A3216 48 648 24405672

Adjustment

Range

Output Current

Output

Current

23 A

18 s 18 s

18 s 2 s 2 s

2 s

Short -circuit Normal

operation

Normal

operation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Stromversorgung Handbücher

Rockwell Automation

Rockwell Automation Reliance electric FlexPak 3000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90EQ Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480EP Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480ERL Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB60BH Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro800 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90EQ Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120B Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLERED Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120F Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480EP Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLSRED40 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240EDRZ SER B Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS120E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB60E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS480 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120EC Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLERED20 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SLC 500 Thermocouple Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS80E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS80E Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung