Rointe Kyros Bedienungsanleitung

MANUAL DE INSTRUCCIONES

MONTAJE, INSTALACIÓN, PUESTA EN

MARCHA Y FUNCIONAMIENTO

MANUEL D’INSTRUCTIONS

MONTAGE, INSTALLATION, MISE EN

MARCHE ET FONCTIONNEMENT

MANUAL DE INSTRUÇÕES

MONTAGEM, INSTALAÇÃO, LIGAÇÃO

E FUNCIONAMENTO

BEDIENUNGSANLEITUNG

MONTAGE, ANBRINGUNG, INBETRIEBNAHME

UND FUNKTIONSWEISE

INSTRUCTIONS MANUAL

MOUNTING, INSTALLATION,

STARTING AND OPERATION

RADIATOR - RADIADOR - RADIATEUR - RADIADOR - HEIZKÖRPER

KYROS

1. DESCRIPTION OF THE “KYROS ” RADIATOR

1.1. Front panel parts

TFT DISPLAY

CONTROL PANEL

1.1.1. TFT display symbols

SEGMENT INDICATION

1PROGRAMMING

2DAYS OF THE WEEK

3TIME OF DAY

4TEMPERATURE SELECTED

5LOCKING THE CONTROL PANEL

6MANUAL/AUTOMATIC FUNCTION

7COMFORT/ECONOMY/ANTI-FROST MODE

8RADIATOR ON

9OPEN WINDOW FUNCTION

1.2. Switching On & Off (stand-by)

By pressing the key , we can switch the radiator on or off. The following image will appear

on the screen when switched on:

The screen will automatically go into sleep mode if no button is pushed for 10 seconds. By

pushing the button again the radiator will go into standby mode with the word “Standby”

appearing followed by the Rointe logo.

KYROS

1.3. Setting the day and time

By pressing the button for 3 seconds, we can access the time and date adjust feature to

adjust the time and date of our radiator.

Pressing the button , flashes up the hours, minutes and days of the week according to the

number of times it is pressed. With the buttons and we can alter the current settings.

To leave the time and date adjust feature, wait 30 seconds or press after the date select.

1.4. Blocking the control panel

By pressing the keys and , at the same time for 3 seconds, we block the control panel,

the control panel symbol is activated, and the keys will not respond when pressed. The

following symbol will appear on the screen if any button is pushed:

To unblock, press again the keys and , at the same time for 3 seconds.

1.5. Temperature selection

By pressing or we change the temperature. When the room temperature is lower than

the one set, the radiator comes on, the symbol appearing.

1.6. Manual/Automatic functions

By pressing we change between the Manual and Automatic functions.

When the Manual function is selected, the symbol appears on the display. When the

Automatic function is selected, the symbol appears on the display.

1.6.1. Manual function

This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,

changing the temperature as indicated in Section 1.5.

ICON MODE TEMPERATURE RANGE

COMFORT 20ºC –30ºC

ECO 15ºC –19,5ºC

ANTI-FROST 8ºC

1.6.2. Automatic function

This mode activates the programming set on the radiator.

1.7. Menu/Programming function

By repeatedly pressing we can see the programming that is saved in the radiator for each

day. Pressing only once shows day one, twice shows day two and so on.

Pressing for 3 seconds allows you to program the radiator directly:

1. Select the CONFORT temperature setting (20ºC to 30ºC), using and .The symbol

and the temperature will flash.

2. Press and we can select using and the ECO temperature (15ºC to 19.5ºC).

The symbol and the temperature will flash.

3. After pressing the button once again, the numbers of the week will start flashing and

show as SEL1, SEL2, SEL3…. We can go forwards and backwards using the button and

. Press to select the day that we wish to program.

4. Pressing , takes us to the hour we wish to program. To change the hours use the or

, buttons. The hours selected will show as (0h, 1h, 2h,…). By pressing the button,

we can select hour by hour the mode required: CONFORT, ECO or OFF.

To finish the programming press or leave it for 30 seconds without pressing any buttons.

1.8. “Open Window” function

This function is activated when the probe detects a reduction of 4º in respect of the set

temperature during 30 minutes. On activation the following image will appear on the radiator

display for 5 seconds:

When the “Open window” function is activated, the following screen will appear showing that

the anti-frost mode is activated:

This function will be active for 2 hours. If the button is pushed during this period the

radiator will switch off. Pushing the button again will switch on the radiator without the

“Open window” function being switched on.

1.9. Screen brightness function

You can change the brightness of the screen by pushing the button for 3 seconds when

the product is in manual mode. Entering this mode you will see the following screen:

KYROS

In ON mode you can increase or decrease the brightness of the screen by using the and

buttons.

You can change the “Standby” mode brightness by pushing the button to move the frame

to the “STAND-BY” position. You can then adjust the brightness by pushing the same and

keys.

To finish the programming wait for 10 seconds without pressing any buttons.

2. INSTALLATION & MOUNTING

The radiator must never be installed immediately below a power point.

In bathrooms, the radiator must never be installed where the switches and other devices may

be within the reach of someone in the shower or bathtub.

2.1. Mounting

The KYROS radiator works by means of natural air convection (Figure 1). In order to achieve

optimal functioning and an even distribution of heat, the lower part of the radiator, once

mounted on the wall, must be at least 10 to 12 cm from the floor, and 30 cm at the most.

Fig. 1 Fig. 2

Minimum

10 cm. Minimum

10 cm.

Minimum

10 cm.

Minimum

10 cm.

Andere Handbücher für Kyros

Inhaltsverzeichnis

Andere Rointe Heizung Handbücher

Rointe

Rointe Tovare aqua Bedienungsanleitung

Rointe

Rointe Kyros Bedienungsanleitung

Rointe

Rointe Torino electric OVAL 500 Bedienungsanleitung

Rointe

Rointe TN030SEB Bedienungsanleitung

Rointe

Rointe D SERIES Gebrauchs- und Pflegehandbuch

Rointe

Rointe DIW0990RAD Bedienungsanleitung

Rointe

Rointe Elba OVAL 400 Bedienungsanleitung

Rointe

Rointe SYGMA SRI1100RADC2 Bedienungsanleitung

Rointe

Rointe TN030SEB Bedienungsanleitung

Rointe

Rointe ecodesign D Series Bedienungsanleitung

Rointe

Rointe Impero electric OVAL 500 Bedienungsanleitung

Rointe

Rointe SYGMA STI030SE 2 Series Bedienungsanleitung

Rointe

Rointe KYROS SHORT Bedienungsanleitung

Rointe

Rointe Series C 603 Bedienungsanleitung

Rointe

Rointe Kyros Betriebsanleitung

Rointe

Rointe KYROS SHORT KRI1100RADC3 Bedienungsanleitung

Rointe

Rointe SYGMA SHORT Bedienungsanleitung

Rointe

Rointe DELTA ULTIMATE Bedienungsanleitung

Rointe

Rointe D SERIES Bedienungsanleitung

Rointe

Rointe Napoli aqua Bedienungsanleitung

Rointe

Rointe Loira electric OVAL 432 Bedienungsanleitung

Rointe

Rointe Giza PRO 400 Bedienungsanleitung

Rointe

Rointe KYROS KTI030SE 3 Series Bedienungsanleitung

Rointe

Rointe Kyros Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung