Roland GX-640/GX-500/GX-400/GX-300 Bedienungsanleitung

Setup Guide

GX-640/GX-500/GX-400/GX-300

BE SURE TO READ THIS FIRST

This document describes the included items and accessories, program installation and

setup, and other important matters. Be sure to read this manual before use.

Thank you very much for purchasing this product.

To ensure correct and safe usage with a full understanding of this product's performance, please besure to read

through this manual completely and store it in a safe location.

Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

The contents of this operation manual and the speciﬁcations of this product are subject to change without

notice.

The operation manual and the product have been prepared and tested as much as possible. If youﬁnd any

misprint or error, please inform us.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which mayoccur through

use of this product, regardless of any failure to perform on the part of this product.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which mayoccur with respect

to any article made using this product.

http://www.rolanddg.com/

Company names and product names are trademarks or registered trademarks of their respective holders.

Contents

This document is the setup guide for four models: GX-640/500/400/300.

Also, most of the gures in this document depict the GX-500

Contents ...............................................................................................................1

To Ensure Safe Use .....................................................................................2

Pour utiliser en toute sécurité ....................................................................8

Important Notes on Handling and Use.............................................................14

About the Documentation for This Machine ...................................................15

Documentation Included with the Machine ........................................................................15

Chapter 1 Setup Preparation ............................................................................17

1-1 Included Items.......................................................................................18

1-2 Installing................................................................................................19

Deciding On an Installation Site ...............................................................................................19

Installation Space ...........................................................................................................................19

Assembling the Stand...................................................................................................................20

Removing the Packing Materials ..............................................................................................20

Connecting the Cables.................................................................................................................21

Chapter 2 Installing Software ...........................................................................23

2-1 About the Included Software .................................................................24

2-2 If You're Using a Windows ....................................................................25

System Requirements...................................................................................................................25

Installing the Software .................................................................................................................26

What to Do If Installation Is Impossible (USB connection) ..............................................27

Uninstalling the Driver .................................................................................................................28

2-3 If You're Using a Macintosh...................................................................30

System Requirements...................................................................................................................30

Installing the Software .................................................................................................................30

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points

which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or

material damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with

respect

to the home and all its furnishings, as well to domestic animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings.

The specic meaning of the symbol is determined by the design contained within the

triangle.

The symbol at left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden).

The specic thing that must not be done is indicated by the design contained within the

circle.

The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out.

The specic thing that must be done is indicated by the design contained within the

circle.

The symbol at left means the power-cord plug must be unplugged from the outlet.

To Ensure Safe Use

Incorrect operation may cause injury.

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an

accident.

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and

may result in injury, blindness, choking, or

other serious accident.

Never operate the machine while tired

or after ingesting alcohol or any medi-

cation.

Operation requires unimpaired judgment.

Impaired judgment may result in an ac-

cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or re.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an ac-

cident.

Before attempting cleaning, mainte-

nance, or attachment or detachment of

optional items, disconnect the power

cord.

Attempting such operations while the ma-

chine is connected to a power source may

result in injury or electrical shock.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or ngers to be pinched or

become caught. Use care when performing

operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-

chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered

may lead to an accident, such as becoming

caught in the machine as the result of an

inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-

son. Climbing or leaning on the machine

may dislodge components and cause a slip

or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To avoid

injury, handle the tool with care.

To Ensure Safe Use

WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for

voltage, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Never use out of doors or in any loca-

tion where exposure to water or high

humidity may occur. Never touch with

wet hands.

Doing so may result in fire or electrical

shock.

Never allow any foreign object to get

inside. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into the

ventilation ports may result in re or electrical

shock. If anything gets inside, immediately

disconnect the power cord and contact your

authorized Roland DG Corp. dealer.

Never place any ammable object nearby.

Never use a combustible aerosol spray

nearby. Never use in any location where

gases can accumulate.

Combustion or explosion may be a dan-

ger.

Danger of electrical short, shock, electrocution, or re

WARNING

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re

or electrical shock.

When using an extension cord or power

strip, use one that adequately satises

the machine's ratings (for voltage, fre-

quency, and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension

cord may cause re.

Connect to ground.

This can prevent re or electrical shock due

to current leakage in the event of malfunc-

tion.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency. In-

stall the machine next to an electrical outlet.

Also, provide enough empty space to allow

immediate access to the electrical outlet.

If sparking, smoke, burning odor, unusual

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never

use if any component is damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

Ratings

To Ensure Safe Use

Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

To Ensure Safe Use

The total weigh of this machine reaches about 70kg (154 lb.).

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total weight of the machine may reach

about 70 kg (154 lb.) or more for the GX-

640 (, about 60 kg (132 lb.) or more for the

GX-500, about 55 kg (121 lb.) or more for

the GX-400, about 50 kg (110 lb.) or more

for the GX-300). Installation in an unsuitable

location may cause a major accident, includ-

ing tip over, fall, or collapse.

Unloading and emplacement are opera-

tions that must be performed by 4 per-

sons or more.

Tasks that require undue effort when per-

formed by a small number of persons may

result in physical injury. Also, if dropped,

such items may cause injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a ma-

jor accident may result, including crushing

of the appendages or the body.

When storing roll media, implement

adequate safety measures to ensure

that the stored media will not roll, fall,

or topple over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more, and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner

that taxes your strength may cause physi-

cal injury.

To Ensure Safe Use

Warning labels are afxed to make areas of danger immediately clear. The meanings of these

labels are as follows. Be sure to heed their warnings. Also, never remove the labels or allow

them to become obscured.

Warning Labels

Caution: Moving Print Heads

The tool carriage moves at

high speed and pose a hazard.

Keep your hands away from it.

Caution: Entanglement Hazard

Never inadvertently allow hands,

hair, clothing such as neckties, or

the like near rotating parts while

in operation.

Pour utiliser en toute sécurité

La manipulation ou l'utilisation inadéquates de cet appareil peuvent causer des blessures ou

des dommages matériels. Les précautions à prendre pour prévenir les blessures ou les dommages

sont décrites ci-dessous.

Avis sur les avertissements

ATTENTION Utilisé pour avertir l'utilisateur d'un risque de décès ou de blessure grave

en cas de mauvaise utilisation de l'appareil.

PRUDENCE

Utilisé pour avertir l'utilisateur d'un risque de blessure ou de dommage

matériel en cas de mauvaise utilisation de l'appareil.

* Par dommage matériel, il est entendu dommage ou tout autre effet

indésirable sur la maison, tous les meubles et même les animaux

domestiques.

À propos des symboles

Le symbole attire l'attention de l'utilisateur sur les instructions importantes ou les

avertissements. Le sens précis du symbole est déterminé par le dessin à l'intérieur du

triangle. Le symbole à gauche signie "danger d'électrocution."

Le symbole avertit l'utilisateur de ce qu'il ne doit pas faire, ce qui est interdit. La chose

spécique à ne pas faire est indiquée par le dessin à l'intérieur du cercle. Le symbole à

gauche signie que l'appareil ne doit jamais être démonté.

Le symbole prévient l'utilisateur sur ce qu'il doit faire. La chose spécifique à faire

est indiquée par le dessin à l'intérieur du cercle. Le symbole à gauche signie que le l

électrique doit être débranché de la prise.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland EGX-600 Bedienungsanleitung

Roland

Roland VersaUV LEC2-300 Bedienungsanleitung

Roland

Roland SP-300 Bedienungsanleitung

Roland

Roland VersaUv LEF - 12i Gebrauchs- und Pflegehandbuch

Roland

Roland HB-12 Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 Bedienungsanleitung

Roland

Roland CX-500 Installations- und Betriebshandbuch

Roland

Roland Soljet EJ-640 Bedienungsanleitung

Roland

Roland TrueVIS AP-640 Bedienungsanleitung

Roland

Roland VersaART RS-640 Bedienungsanleitung

Roland

Roland TrueVIS VG-640 Bedienungsanleitung

Roland

Roland PC-600 Bedienungsanleitung

Roland

Roland VersaCamm SP-540V Bedienungsanleitung

Roland

Roland PR-1111 Bedienungsanleitung

Roland

Roland IU-1000F Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 F Bedienungsanleitung

Roland

Roland METAZA MPX-70 Bedienungsanleitung

Roland

Roland Metaza MPX-60 Bedienungsanleitung

Roland

Roland VersaCamm VP-540i Bedienungsanleitung

Roland

Roland TrueVIS SG2-640 Betriebsanleitung

Roland

Roland TrueVIS LG-640 Bedienungsanleitung

Roland

Roland VersaUV LEF-20 Gebrauchs- und Pflegehandbuch

Roland

Roland XC-540MT Bedienungsanleitung

Roland

Roland LEF-300 Gebrauchs- und Pflegehandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung