ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE Bedienungsanleitung

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

AnoFrame VersaMount

Magnet Base

split rails

solid rail

Incept-9.6.02

Figure 1

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountMagnetBase

Figure 3

Corner

Brackets

AnoFrame

Rails

AnoFrame

Split Rails

Figure 2

Figure 4

Screw Tab Transitional

Collar

Vertical

Post

Magnet Base

Instruction Sheet (page 1 of 2)

#97-0411

solid rail

split rails

Figure 5

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Slide screw tab into channel of bottom

Ano rail. Fig. 3.

Step 3

Place transitional collar over screw tab

and push onto frame. Fig. 4.

Step 4

Finish assembling frame following the

sequence in Fig. 5.

Note: Placement of split rails will

depend on type of frame. Split rails

will be on the top for top-loading

frames and on the side for side-

loading frames.

Instructions For Assembly

Parts

Step 5

Screw vertical post onto screw tab on

frame and tighten. Fig. 6

Note: Use the end of the post with

the smaller opening.

Step 6

Screw the vertical post onto the

magnet base and tighten. Fig 7

Step 7

Slide your graphic into the AnoFrame.

Fig. 8

Instructions For assembly

Incept-9.6.02

Figure 6

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountMagnetBase

Figure 8

Figure 7

AnoFrame VersaMount

Magnet Base

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

#97-0411

Instruction Sheet (page 2 of 2)

Finished Look

Parts

AnoFrame VersaMount

Magnet Base

split rails

solid rail

Incept-9.6.02

Figure 1

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountMagnetBase

Figure 3

Corner

Brackets

AnoFrame

Rails

AnoFrame

Split Rails

Figure 2

Figure 4

Screw Tab Transitional

Collar

Vertical

Post

Magnet Base

Instruction Sheet (page 1 of 2)

#97-0411

solid rail

split rails

Figure 5

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Slide screw tab into channel of bottom

Ano rail. Fig. 3.

Step 3

Place transitional collar over screw tab

and push onto frame. Fig. 4.

Step 4

Finish assembling frame following the

sequence in Fig. 5.

Note: Placement of split rails will

depend on type of frame. Split rails

will be on the top for top-loading

frames and on the side for side-

loading frames.

Instructions For Assembly

Parts

Step 5

Screw vertical post onto screw tab on

frame and tighten. Fig. 6

Note: Use the end of the post with

the smaller opening.

Step 6

Screw the vertical post onto the

magnet base and tighten. Fig 7

Step 7

Slide your graphic into the AnoFrame.

Fig. 8

Instructions For assembly

Incept-9.6.02

Figure 6

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountMagnetBase

Figure 8

Figure 7

AnoFrame VersaMount

Magnet Base

#97-0411

Instruction Sheet (page 2 of 2)

Finished Look

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ROSE DISPLAYS Zubehör Handbücher

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH 4 WALL MOUNTS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS CLEAR LOCKING HOOKS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND CABLE AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE CLIP AND CABLE AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH ROD, CABLE CLIP AND BALL... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS BUTTERFLY CLIPS WITH NON-LOCKING HOOKS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GIRDER GRIPPER Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND BALL CHAIN Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND CABLE AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CORD AND BARB Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS CEILING SLUG Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH OLD ONEUP GOTCHA CLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH GOTCHA AND MULTICLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE-GENERIC Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH METAL CLIP AND V CLIP Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH ADHESIVE Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH 4 WALL MOUNTS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH MULTICLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH PEGS AND MULTICLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND SAUCER Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOKIOSK WITH ANOFOOT Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung