Rose electronics CrystalView DVI Quad Einrichtungshandbuch

CrystalView DVI Quad ™

DIGITAL CATx or Fiber with USB 2.0 Extender

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND OPERATIONS

MANUAL

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

Rose Electronics Part # MAN-CRVDVIQ

Printed In the United States of America – 1.7

Rose Electronics warrants the CrystalView DVI Quad to be in good working order for one year from the date of

purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at

any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as

set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced parts

become the property of Rose Electronics. This limited warranty does not include service to repair damage to

the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including static

discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE REMEDY

SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at

his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft Windows

are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this manual are

acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

Product

CrystalView DVI Quad

This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly,

that is in strict accordance with the manufacturer’s instructions may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A digital device in accordance with the

specifications of Part 15 of FCC rules, which are designed to provide reasonable protection against such

interference when the equipment is operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own expense will be required to

take whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out

in the Radio Interference Regulation of Industry Canada.

Operation is subject to the following two conditions:

1- This device may not cause harmful interference

2- This device must accept any interference received including interference that may cause undesired

operation.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux

appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par

Industrie Canada.

CE Statement

The product meets European Standard EMC:

EN-55022:2006 Class A

EN 61000-4-2:2001

EN 61000-4-3:2006

EN 61000-4-4:2004

EN 61000-4-5:2006

TABLE of CONTENTS

Contents Page #

Disclaimer ................................................................................................................................................................................ 2

System Introduction ................................................................................................................................................................ 2

Features .................................................................................................................................................................................. 2

Compatibility ............................................................................................................................................................................ 3

Package contents .................................................................................................................................................................... 3

CrystalView DVI Quad Models / Connectors .......................................................................................................................... 4

Installation ............................................................................................................................................................................. 22

LED Indicators ....................................................................................................................................................................... 25

Operation ............................................................................................................................................................................... 26

Color Depth Selection ........................................................................................................................................................ 27

Service Information ............................................................................................................................................................... 29

Maintenance and Repair ................................................................................................................................................... 29

Technical Support .............................................................................................................................................................. 29

Product Safety ....................................................................................................................................................................... 30

Figures Page #

Figure 1. Connecting 4-port Transmitter and Receiver ......................................................................................................... 23

Figure 2. Connecting 3-port Transmitter and Receiver ......................................................................................................... 23

Figure 3. Connecting 2-port Transmitter and Receiver ......................................................................................................... 24

Figure 4. Connecting 1-port Transmitter and Receiver ......................................................................................................... 24

Figure 5. Link Port LED Indicators ........................................................................................................................................ 25

Figure 6. Fiber Port LED Indicators ...................................................................................................................................... 25

Figure 7.Video Status LED .................................................................................................................................................... 25

Figure 8. Jumper Settings (Transmitter unit) ........................................................................................................................ 26

Figure 9. Jumper Settings (Receiver unit) ............................................................................................................................ 28

Tables Page #

Table 1. Compatible Devices .................................................................................................................................................. 3

Table 2. DDC Source Settings .............................................................................................................................................. 26

Table 3. Color Depth jumper (Transmitter unit) .................................................................................................................... 27

Table 4. Moment of switching jumper (Receiver unit) ........................................................................................................... 28

Appendices Page #

Appendix A – General Specifications .................................................................................................................................... 31

Appendix B – Part Numbers .................................................................................................................................................. 32

Appendix C – RackMount Kit ................................................................................................................................................ 32

Appendix D - Serial / Audio Setup and Operation................................................................................................................. 33

Appendix E - Kit Part Numbers ............................................................................................................................................. 34

INTRODUCTION

CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL 2

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages

resulting from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, or circuitry of the product without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product.

System Introduction

Thank you for choosing the Rose Electronics CrystalView DVI Quad, a high-performance, long distance,

multi-function digital KVM Extender with support for multiple desktop peripherals. The CrystalView DVI Quad

makes this possible by the use of CATx or fiber cable. You can fully operate and control a computer from

33,000 feet (10Km) over single mode fiber cable, or from 460 feet (140 meters) using CATx solid-core AWG24

cable.

The CrystalView DVI Quad supports a wide variety of DVI-D monitors and video cards, USB or PS/2

keyboards and mice, and USB 2.0 devices, as well as line level analog audio and serial devices. Up to 4 USB

2.0 peripherals, such as USB speakers, printers, USB mass storage devices and web cameras can be directly

connected to the receiver’s 4 USB ports. Additional USB devices can be connected using a USB hub.

The system consists of two Units, a transmitter and a receiver. The transmitter connects to a computer’s DVI-D

video output, USB keyboard and mouse ports, USB 2.0 device ports, audio input and output connectors, and a

serial port. The transmitter also has DVI video outputs for local monitors located close to the host CPU. The

receiver connects directly to DVI-D video displays, a USB keyboard and mouse, USB 2.0 devices, powered

speakers, a microphone, and a serial device. The transmitter and receiver are connected together with industry

standard CATx cable or fiber cable depending on the model.

Features

 Perfect image quality at resolutions up to 1920 x 1200 @ 60Hz using CATx, 5e, 6, or 7 cable

 Extend a KVM station from a CPU using fiber or CATx cables

 Supports USB-HID or PS/2 keyboard and mouse

 Supports USB1.1/2.0 peripherals

 Supports all DVI-D graphic cards

 Supports 16 Bit/24 Bit auto switching or fixed 24 Bit color depth (user selectable)

 Single, dual, triple, and quad video models available

 Serial and analog stereo audio option

 The CrystalView DVI Quad uses a microprocessor to emulate the keyboard and mouse. The keyboard and

mouse on the receiver do not have to be connected for the PC to boot; only the transmitter Unit must be

connected to the PC

 Status indicator LEDs on each device

 Compatible with all operating systems

 The computer’s video is displayed on both KVM stations monitors, local and remote end

 Rack mount kits available

3 CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL

Compatibility

Computers

PCs (all operating systems)

Displays

DVI-D video to 1.65 Gbit/sec/channel

Keyboards

All standard USB and PS/2 keyboards

Mouse

All standard USB and PS/2 mice

Serial

Compatible devices up to 19.2KBaud

Audio

Bi-directional CD quality stereo audio

USB

USB 2.0 devices

Table 1. Compatible Devices

Package contents

The package contents consist of the following:

 The transmitter and receiver Units

 1*DVI-D (6ft DVI Cable (M/M)

 1*USBAB (6ft USB A-to-B Cable)

 Power cables and power transformers for transmitter and receiver units.

 Installation and operations manual.

Additional DVI, USB, Audio and Serial cables for CPU-to-Transmitter connections can be ordered separately.

VGA to DVI converters are also available, as well as Interconnecting Fiber and CATx cables.

Special Application Cables

1. KVM / CPU Cable. DVI-D(M) + 2 mini-DIN 6(F) PS/2 kb/mouse to DVI-D(M). For PS/2

equipped transmitter units.

2. Serial / Audio Cable. DB9F + 2*3.5mm audio to mini-DIN 8. For analog audio and serial

equipped transmitter units.

3. PS/2 Keyboard/Mouse “Y” cable. Mini-DIN 6(M) to 2*mini-DIN 6(F). For connecting local

keyboard and mouse to PS/2 equipped transmitter units.

If the package contents are not correct, contact Rose Electronics or your reseller, so the problem can be

quickly resolved.

MODELS

CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL 4

CrystalView DVI Quad Models / Connectors

Single Video 1x Video Only & Video + Audio/Serial

CATx

FIBER

TRANSMITTERS RECEIVERS

CRV-DLDTX0D1D/R……….DVI Video Only, CATx CRV-SRDTX0D1D/R………DVI Video Only, CATx

CRV-DLDFM0D1D/R………DVI Video Only, Multi-mode Fiber CRV-SRDFM0D1D/R………DVI Video Only, Multi-mode Fiber

CRV-DLDFS0D1D/R……….DVI Video Only, Single-mode Fiber CRV-SRDFS0D1D/R………DVI Video Only, Single-mode Fiber

CRV-DLDTX0D1D/AUD/R…. DVI Video + Aud/Ser, CATx CRV-SRDTX0D1D/AUD/R…. DVI Video + Aud/Ser, CATx

CRV-DLDFM0D1D/AUD/R… DVI Video + Aud/Ser, Multi-mode Fiber CRV-SRDFM0D1D/AUD/R… DVI Video + Aud/Ser, Multi-mode Fiber

CRV-DLDFS0D1D/AUD/R….DVI Video + Aud/Ser, Single -mode Fiber CRV-SRDFS0D1D/AUD/R….DVI Video + Aud/Ser, Single -mode Fiber

CRV-DLDTX0D1D/AS/R……DV I Video + Aud/Ser, CATx CRV-SRDTX0D1D/AS/R…….DV I Video + Aud/Ser, CATx

CRV-DLDFM0D1D/AS/R……DVI Video + Aud/Ser, Multi-mode Fiber CRV-SRDFM0D1D/AS/R……DVI Video + Aud/Ser, Multi-mode Fiber

CRV-DLDFS0D1D/AS/R……DVI Video + Aud/Ser, Single-mode Fiber CRV-SRDFS0D1D/AS/R…….DVI Video + Aud/Ser, Single-mode Fiber

5 CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL

Dual Video 2x Video Only & Video + Audio/Serial

CATx

FIBER

TRANSMITTERS RECEIVERS

CRV-DLDTX0D2D/R……….2x DVI Video Only, CATx CRV-SRDTX0D2D/R………2x DVI Video Only, CATx

CRV-DLDFM0D2D/R………2x DVI Video Only, Multi-mode Fiber CRV-SRDFM0D2D/R……...2x DVI Video Only, Multi-mode Fiber

CRV-DLDFS0D2D/R……….2x DVI Video Only, Single-mode Fiber CRV-SRDFS0D2D/R………2x DVI Video Only, Single-mode Fiber

CRV-DLDTX0D2D/AUD/R……….2x DVI + Aud/Ser, CATx CRV-SRDTX0D2D/AUD/R……….2x DVI + Aud/Ser, CATx

CRV-DLDFM0D2D/AUD/R………2x DVI + Aud/Ser, MM Fiber CRV-SRDFM0D2D/AUD/R………2x DVI + Aud/Ser, MM Fiber

CRV-DLDFS0D2D/AUD/R……….2x DVI + Aud/Ser, SM Fiber CRV-SRDFS0D2D/AUD/R……….2x DVI + Aud/Ser, SM Fiber

CRV-DLDTX0D2D/AS/R……….2x DVI + Aud/Ser, CATx CRV-SRDTX0D2D/AS/R……….2x DVI + Aud/Ser, CATx

CRV-DLDFM0D2D/AS/R………2x DVI + Aud/Ser, MM Fiber CRV-SRDFM0D2D/AS/R………2x DVI + Aud/Ser, MM Fiber

CRV-DLDFS0D2D/AS/R……….2x DVI + Aud/Ser, SM Fiber CRV-SRDFS0D2D/AS/R……….2x DVI + Aud/Ser, SM Fibe

CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL 6

Single Video 1x Video with USB-HID or PS/2 + Audio/Serial

CATx

FIBER

TRANSMITTERS RECEIVERS

CRV-DLDTXUD1D/R…… DVI + USB HID, CATx CRV-SRDTXUD1D/R…… DVI + USB HID, CATx

CRV-DLDFMUD1D/R……DVI + USB HID, Multi-mode Fiber CRV-SRDFMUD1D/R……DVI + USB HID, Multi-mode Fiber

CRV-DLDFSUD1D/R…… DVI + USB HID, Single-mode Fiber CRV-SRDFSUD1D/R…… DVI + USB HID, Single-mode Fiber

CRV-DLDTXUD1D/AUD/R….DVI + USB HID + Aud/Ser, CATx CRV-SRDTXUD1D/AUD/R….DVI + USB HID + Aud/Ser, CATx

CRV-DLDFMUD1D/AUD/R…DVI + USB HID + Aud/Ser, MM Fiber CRV-SRDFMUD1D/AUD/R…DVI + USB HID + Aud/Ser, MM Fiber

CRV-DLDFSUD1D/AUD/R… DVI + USB HID + Aud/Ser, SM Fiber CRV-SRDFSUD1D/AUD/R… DVI + USB HID + Aud/Ser, SM Fiber

CRV-DLDTXPD1D/R……….DVI + PS/2, CATx CRV-SRDTXPD1D/AUD/R……DVI + PS/2, CATx

CRV-DLDFMPD1D/R………DVI + PS/2, Multi-mode Fiber CRV-SRDFMPD1D/AUD/R…...DVI + PS/2, MM Fiber

CRV-DLDFSPD1D/R……….DVI + PS/2, Single-mode Fiber CRV-SRDFSPD1D/AUD/R……DVI + PS/2, SM Fiber

CRV-DLDTXPD1D/AUD/R……DVI + PS/2 + Aud/Ser, CATx CRV-SRDTXPD1D/AUD/R……DVI + PS/2 + Aud/Ser, CATx

CRV-DLDFMPD1D/AUD/R…...DVI + PS/2 + Aud/Ser, MM Fiber CRV-SRDFMPD1D/AUD/R…...DVI + PS/2 + Aud/Ser, MM Fiber

CRV-DLDFSPD1D/AUD/R……DVI + PS/2 + Aud/Ser, SM Fiber CRV-SRDFSPD1D/AUD/R……DVI + PS/2 + Aud/Ser, SM Fiber

Inhaltsverzeichnis

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics CLK-4U2TP-100M Bedienungsanleitung

Rose electronics

Rose electronics CRYSTALVIEW USB 1.1 Bedienungsanleitung

Rose electronics

Rose electronics CRK-2DTPPDVI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Betriebsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB-3-2-1 Fiber Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Bedienungsanleitung

Rose electronics

Rose electronics Crystal View Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CAT5 Rack CRV-12SLP Bedienungsanleitung

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Mini Bedienungsanleitung

Rose electronics

Rose electronics RJ45 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Extreme Bedienungsanleitung

Rose electronics

Rose electronics CrystalView HDT Bedienungsanleitung

Rose electronics

Rose electronics XtendVue Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI CAT Series Bedienungsanleitung

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CRK-1DTXT-HD5 Bedienungsanleitung

Rose electronics

Rose electronics CRK-1P1V Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung