Rose electronics CrystalView Extreme Bedienungsanleitung

CrystalView Extreme

LAN Extender

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND

OPERATIONS

MANUAL

Part Number CRK-1DTXT-EX45/A1

Limited Warranty

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission

of Rose Electronics.

Rose Electronics Part # MAN-CRVEXT4

Printed In the United States of America – Revision 1.3

Rose Electronics warrants the CrystalView Extreme to be in good working order for one year from the

date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good

working order at any time during this one-year warranty period, Rose Electronics will, at its option,

repair or replace the Unit as set forth below. Repair parts and replacement units will be either

reconditioned or new. All replaced parts become the property of Rose Electronics. This limited

warranty does not include service to repair damage to the Unit resulting from accident, disaster,

abuse, or unauthorized modification of the Unit, including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period

to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is

delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to

prepay shipping charges to the warranty service location, and to use the original shipping container or

its equivalent. You must call for a return authorization number first. Under no circumstances will a unit

be accepted without a return authorization number. Contact an authorized repair center or Rose

Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO

WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME

STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL

ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST

PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE

ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY

TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE

OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft

Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this

manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

FCC Radio Frequency Interference

This device complies with Part 15 of the FCC rules; operation is subject to

the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including

interference that may cause undesired operation.

CE Statement

This product meets European Standard EMC EN-55022:2006 + A1:2007

Class A, EN 61000-3-2:2006 + A2(2009), EN 61000-3-3:2008, and EN

55024:1998 + A1(2001) + A2(2003).

IC Statement

This Class A digital apparatus complies with Canadian ICES-003.

Table of Contents

Contents Page #

Disclaimer...................................................................................................... 1

System Introduction....................................................................................... 1

Features......................................................................................................... 2

Package Contents ......................................................................................... 3

Additional Installation Items........................................................................... 3

Rose Electronics web site.............................................................................. 3

Product Registration...................................................................................... 3

System Overview........................................................................................... 4

Models ........................................................................................................... 5

Transmitter - Front Panel........................................................................... 6

Transmitter - Rear panel Connectors......................................................... 6

Receiver - Front Panel............................................................................... 7

Receiver - Rear Panel................................................................................ 7

System Installation......................................................................................... 8

Transmitter installation............................................................................... 8

Receiver installation................................................................................... 9

Installation Verification............................................................................... 9

Connecting USB Devices......................................................................... 10

System Operation........................................................................................ 10

System Troubleshooting.............................................................................. 11

Product Safety............................................................................................. 13

Maintenance and Repair.............................................................................. 14

Technical Support........................................................................................ 14

Figures Page #

Figure 1. Models............................................................................................ 5

Figure 2. Typical Installation.......................................................................... 8

Tables Page #

Table 1. Transmitter Indicators/Connectors .................................................. 6

Table 2. Receiver Indicators / Connectors .................................................... 7

Appendices Page #

Appendix A – General Specifications.......................................................... 15

Appendix B – Compatibility.......................................................................... 16

Appendix C – Pairing Transmitter and Receiver ......................................... 17

INTRODUCTION

CrystalView Extreme Installation and Operations Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the

manufacturer assumes no responsibility for errors or omissions. Neither

does the manufacturer assume any liability for damages resulting from the

use of the information contained herein. The manufacturer reserves the

right to change the specifications, functions, or circuitry of the product

without notice.

The manufacturer cannot accept liability for damages due to misuse of the

product or other circumstances outside the manufacturer’s control. The

manufacturer will not be responsible for any loss, damage, or injury arising

directly or indirectly from the use of this product.

System Introduction

Thank you for choosing the CrystalView Extreme extender from Rose

Electronics for your remote accessing needs. The CrystalView Extreme

system consists of a Transmitter unit and a Receiver unit. The Transmitter

unit connects to your corporate LAN and to your computer’s DVI-D and USB

Type A connectors using the provided DVI and USB cables. The Receiver

unit also connects to your corporate LAN and to your remote workstation.

This allows you to access your computer from any location on your LAN.

The Transmitter and Receiver are paired at the factory and only

communicate with each other. If the Transmitter needs to be paired to a

different Receiver or a Receiver paired to a different Transmitter, see

Attachment C for instructions.

The CrystalView Extreme extender supports all USB 2.0 devices. It is

ideal for use in industrial control areas, digital signage, connecting LAN

cameras for security systems, USB device printing, scanning and

storage.

If additional USB devices are needed, you can add up to 4 USB hubs to

the three port Receiver model and connect up to 13 USB devices.

The CrystalView Extreme supports all major operating systems including

Windows®, MAC®, and Linux®

USB printers, scanners, web cameras, USB hard drives, flash drives, MP3

players and more can easily be connected to the Receiver unit.

2 CrystalView Extreme Installation and Operations Manual

Features



Supports HD video with resolutions up to 1680 x 1050



Supports USB 2.0 (high-speed / 480 Mb/s),

USB 2.0 and 1.1 (Full-speed / 12 Mb/s, and

USB 2.0 and 1.1 (Low-speed / 1.5 Mb/s



Extend your workstation to any location on your corporate LAN or a

point-to-point connection between the transmitter and receiver units.

Point-to Point max CATx cable length of 330 feet (100M).



3-USB port available on the Receiver unit



Standard USB hubs can be used to increase the maximum number of

connected USB devices to 13 and 4 USB hubs.



Up to 500 mA of power is available at each USB port on the Receiver

for powering high-power USB devices



Plug-and-Play installation, no configuration or set-up needed.



Support multiple systems on a LAN. (up to 30 on a 1Gbps LAN)



The Transmitter can locate the paired Receiver anywhere within the

network.



Operates on a network connection of 100Mbps or 1Gbps.



Operates through Ethernet switches.



Installation consists of:

1. Connecting the Receiver to your DVI monitor, USB keyboard and

mouse, speakers and USB device(s)

2. Connect the Transmitter to your computer’s DVI video port and

USB port.

3. Connect the Transmitter and Receiver to your network using

standard CAT5 cable

4. Apply power and the installation is complete.

The Transmitter unit requires a +5VDC power adapter (included).

The Receiver unit requires a +24VDC power adapter (included).

CrystalView Extreme Installation and Operations Manual 3

Package Contents



Transmitter unit



Receiver unit



5V, 3A power adapter (Transmitter)



24V, 1A power adapter (Receiver)



USB Type A to Type B cable (6 ft)



DVI cable (male to male- 5 ft)



Product Manual

Additional Installation Items

Computer with DVI-D/DVI-I output

USB 1.1 or 2.0 host computer

2-CAT5 UTP cable (Transmitter & Receiver to network)

or 1 CAT5 cable (Transmitter to Receiver – Point-To-Point)

USB 1.1 or 2.0 compatible devices

Rose Electronics web site

Visit our web site at www.rose.com for additional information on the

CrystalView Extreme and other products offered by Rose Electronics that

are designed for data center applications, classroom environments, digital

wall/signage displays, industrial / military systems, and many other access

and switching applications.

Product Registration

Take advantage of the following when you register your Rose Electronics

products online at www.rose.com/htm/online-registrationform.htm.

Rose Electronics standard warranty Plus. . . .

Free Lifetime Firmware Updates

Free Lifetime Technical Support

30 day Money Back Guarantee

Priority “First-In-Line” Status for Technical Support

OVERVIEW

4 CrystalView Extreme Installation and Operations Manual

System Overview

The CrystalView Extreme is a very versatile and flexible system that can be

easily and quickly installed. You can position your computer anywhere on

your LAN and access it over your network from anywhere you install the

matched Receiver. The Transmitter unit will locate the Receiver unit within

the network by the MAC address. Once found, you will have full control of

the computer over your LAN. The CrystalView Extreme system supports HD

video and USB 1.1 and 2.0. You can control and use a USB keyboard, USB

mouse, webcam, flash drive, USB speakers, microphone and other

compatible USB devices.

The CrystalView Extreme can also be used as a KVM extender. The

transmitter unit can be directly connected to the receiver unit via standard

CATx cable. If you install the CrystalView Extreme units in a point-to-point

configuration and not through a network, the maximum CAT5 cable length in

this configuration is 330 feet (100m).

The versatility of the CrystalView Extreme makes it ideal for security,

medical, signage, and industrial applications where access to the computer

is over your LAN. Multiple systems can be connected to your LAN and all

accessed simultaneously with no interference (up to 30 systems on a 1Gbps

LAN).

The Receiver unit has 3 USB Type A connectors. These are usually

connected to a USB mouse, USB keyboard, and a USB HUB. The

CrystalView Extreme supports up to 13 USB devices and 4 HUB levels at

USB speeds up to 480 Mb/s.

The CrystalView Extreme can be installed using your existing network

cabling or the Transmitter can be directly connected to the Receiver unit

using industry standard CAT5 or better cable for a point-to-point connection.

MODELS

CrystalView Extreme Installation and Operations Manual 5

Models

Transmitter – Front View

Indicators

Pair

Status

Link

Video

USB

Transmitter – Rear View

Connectors

DVI-D In

Config

USB Type B

Link

Power (+5V / 3A)

Receiver – Front View

Indicators

Pair

Status

Link

Video

USB

Connectors

USB Type A (3)

Receiver – Rear View

Connectors

DVI-D Out

Headphone Out

Microphone In

Config

Link

Power (+24V / 1A)

Figure 1. Models

6 CrystalView Extreme Installation and Operations Manual

Transmitter - Front Panel

Indicator

Description

Pair (Button)

Reserved – (See Appendix C)

Status

(Green LED)

On = Ready / Off = No power /

Blinking = being configured

Link

(Green LED)

On = Valid Link between Transmitter and Receiver

Off = No Link

Video

(Green/Amber LED)

On = Valid Link between the Transmitter and host

computer

Off = No Link

Blinking = Video is being transmitted between the

Transmitter and Receiver

Amber = No video source detected

Blinking Amber = Invalid resolution detected

USB

(Green/Amber LED)

On = Properly enumerated on host computer

Off = No Link

Blinking = USB data being transmitted between the

Transmitter and Receiver

Amber = No connection to the host computer

Blinking Amber = Over current condition on one

or more USB ports

Transmitter - Rear panel Connectors

Connector

Description

DVI-D In

DVI-D Video Input from Host computer (Supplied)

Config

Reserved for company use only

USB Type B

USB input from Host computer (Supplied)

Link (RJ45)

Connection for a CAT5 or better cable to the

Receiver unit

Power

+5V, 3A power adapter (Supplied)

Table 1. Transmitter Indicators/Connectors

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics UltraLink 2 Bedienungsanleitung

Rose electronics

Rose electronics CRK-1P1V Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CAB-MD6M2MD6F Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX HDMI Multi CRV-SRDTXT2D-2T-HD6... Bedienungsanleitung

Rose electronics

Rose electronics CrystalView USB2 Bedienungsanleitung

Rose electronics

Rose electronics CRK-T1DFXDM-DLT Bedienungsanleitung

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX HDMI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView EX DVI Multi CRK-1DTXT2DM-2T-EX6 Bedienungsanleitung

Rose electronics

Rose electronics CRK-1P1V Bedienungsanleitung

Rose electronics

Rose electronics CrystalView HDMI 4K60 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Mini Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Betriebsanleitung

Rose electronics

Rose electronics CrystalView Exact Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Quad Einrichtungshandbuch

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics Xcion XCK-2DTXUD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalView HDT Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CLK-1U4TP-100M/PE Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB Fiber Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB-3-2-1 Fiber Bedienungsanleitung

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Bedienungsanleitung

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung