Royal Vendors GII Referenzhandbuch

201 INDUSTRIAL BOULEVARD • KEARNEYSVILLE, WV 25430

Phone: (304) 728-7056 • Fax: (304) 725-6579 • Toll Free: (800) 931-9214

PAGE: 1 of 2

DATE: 6-19-02

REVISION: 03

F0019003.FRM ISSUE DATE: 6/5/95 REV. B REV. DATE: 2/27/98 PAGE 1 OF 2

ANY QUESTIONS??? CONTACT ROYAL VENDORS’ CUSTOMER SERVICE DEPARTMENT

CALL TOLL FREE (800) 931-9214

SERVICE BULLETIN #

00141

SUBJECT: Fuse Box Assembly (Transformer)

MODELS: GII and GIII Venders

KIT NUMBER KIT DESCRIPTION

095114 Fuse Box Assembly (With Leads for GII models)

095115 Fuse Box Assembly (Without Leads for GIII models)

Instructions:

FUSE BOX ASSEMBLY WITH LEADS (095114)

1. Remove power to vender (or door) to prevent electrical shock.

2. Locate the 24VAC "HOT" wire from the transformer to the control board (plugs into position #1, next to key).

3. Find a suitable place for locating the "Fuse Box Mount" bracket (P/N 099538) shown in illustration on

the following page.

Note: It is advised that the bracket be mounted in a position that is suitable to the length of wiring and to

the opening of the fuse box.

4. Scribe the two holes to mount the fuse box. Using a 1/8" drill bit drill the two holes.

5. Using the two #8-32 sems screws (P/N 901,011,021) attach the "Fuse Box Mount".

6. Cut the 24VAC "HOT" wire found in step #2 in a convenient location located near to the

"Fuse Box Mount". Strip each end of the 24VAC "HOT" wire at the location of the cut.

7. Use the harness attached to the fuse box and crimp one of the two wires (with the provided

"In-Line Splice") to one end of the "cut" wire. Shown below. Connect and crimp the other "fuse box wire"

to the other end of the "cut" wire.

8. Restore power (Vend from a selection, this will acknowledge 24VAC power to motors).

Reason For Fix:

It is important to have a fuse in the secondary circuit to protect the control board in

the event of a shorted 24 volt item (changer, validator, vend motor)

The following areas of this vender

contain voltage, which can cause seri-

ous injury or even death. The main

power cord, supplying 110 VAC to the

evaporator, EMI filter, and refrigeration

system. The power line from the EMI

filter to the ballast and transformer.

The ballast can produce upwards of

600 volts. Remove power from

vender before working in any of these

areas.

201 INDUSTRIAL BOULEVARD • KEARNEYSVILLE, WV 25430

Phone: (304) 728-7056 • Fax: (304) 725-6579 • Toll Free: (800) 931-9214

PAGE: 2 of 2

DATE: 6-19-02

REVISION: 03

F0019003.FRM ISSUE DATE: 6/5/95 REV. B REV. DATE: 2/27/98 PAGE 2 OF 2

SERVICE BULLETIN #

00141

ANY QUESTIONS??? CONTACT ROYAL VENDORS’ CUSTOMER SERVICE DEPARTMENT

CALL TOLL FREE (800) 931-9214

SUBJECT: Fuse Box Assembly (Transformer)

MODELS: GII and GIII Venders

Fuse Box Assembly (095115)

Fuse Box Assembly with Leads (095114)

Dieses Handbuch passt für folgende Modelle

Andere Royal Vendors Automat Handbücher

Royal Vendors

Royal Vendors RVV Gen II Bedienungsanleitung

Royal Vendors

Royal Vendors Merlin IV Bauanleitung

Royal Vendors

Royal Vendors GIII CDC Service-Handbuch

Royal Vendors

Royal Vendors RVV 700 Bedienungsanleitung

Royal Vendors

Royal Vendors Merlin IV Bauanleitung

Royal Vendors

Royal Vendors Merlin IV Referenzhandbuch

Royal Vendors

Royal Vendors TDV Service-Handbuch

Beliebte Automat Handbücher anderer Marken

Godrej

Godrej Minifresh 2000 Bedienungsanleitung

LAUREL

LAUREL 300 Montage- und Bedienungsanleitung

Macas

Macas MACES7C-300-90-00 Series Bedienungsanleitung

Dixie Narco

Dixie Narco SIID Bedienungsanleitung

VendNet

VendNet CB500-SA Bedienungsanleitung

FAS International

FAS International FASTER TMT Bedienungsanleitung

Three Square Market

Three Square Market Kiosk Bedienungsanleitung

Seaga

Seaga JDL-2 COMBO Bauanleitung

Fastcorp

Fastcorp F820 Bauanleitung

Coinco

Coinco BillPro Bedienungsanleitung

Intralot

Intralot OHIO MPNG Bedienungsanleitung

LAVAZZA

LAVAZZA KLIX Series Bedienungsanleitung

Azkoyen

Azkoyen Zensia Handbuch

Azkoyen

Azkoyen STEP 74 Handbuch

SandenVendo

SandenVendo Snack Safety Point SVE SSP Betriebsanleitung

Intralot

Intralot Dreamtouch Smart Bedienungsanleitung

Westomatic

Westomatic Primo Compact Bedienungsanleitung

Crane

Crane Dixie-Narco Glassfront BevMax 3 5800 Bedienungsanleitung