Ruijie RG-N18000-XH Series Installations- und Betriebsanleitung

Ruijie RG-N18000-XH Series Switches

Hardware Installation and Reference Guide

Document Version: V1.00

Date: 2023-01-01

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this

document or any portion of this document, in any form or by any means, without the prior written consent of

Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all

of the products, services or features described in this document may not be within the scope of your purchase

or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied

statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and service engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support Email: [email protected]

Skype: [email protected]

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic

font

Arguments for which you supply values are in

italic

font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n

times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result

in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not

lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,

the actual version prevails.

Hardware Installation and Reference Guide Product Overview

1Product Overview

RG-N18000-XH series switches are Ruijie-developed next-generation core switches. Based on matrix separation, they

use the Clos architecture and support a large buffer. They support dual supervisor modules and redundancy of power

modules, switch fabric modules, and fan modules.

The RG-N18018-XH: has 18 transverse slots, and provides dual supervisor modules, 16 line card slots, 20 power

modules, eight switch fabric modules, and three fan modules.

The RG-N18010-XH: has 10 transverse slots, supports dual supervisor modules, eight line card slots, ten power

modules, eight switch fabric modules and three fan modules.

1.1 RG-N18018-XH

Specifications

Model

RG-N18018-XH

Module Slot

Two supervisor module slots, 16 line card slots, and eight switch fabric module slots

Supervisor Module

M18000XH-CM

Supervisor Module

Redundancy

Supported

Switch Fabric Module

M18018XH-FE-E IV

Line Card

M18000XH-48CQ-CES

M18000XH-36QC-CES

Hot Swapping

Supported

Power Module

RG-PAH3000I-F:

100 V AC to 176 V AC, power: 1,500 W

176 V AC to 240 V AC, power: 3,000 W

HVDC Power Supply

RG- PAH3000I-F:

240 V DC to 380 V DC, power: 3,000 W

When the equipment room uses HVDC, the HVDC-supported PDU must be provided. You

must first insert the power core into the power receiving port of the switch, and then

insert the power cord into the PDU. Do not do it in a reverse way.

Power Module

Redundancy

Supported (N + 1 redundancy of the same model)

Fan Module

M18018XH-FAN

EMC Standards

GB/T 9254.1

Safety Regulation

Compliance

GB 4943.1

Operating

Temperature

0°C to 40°C (32°F to 104°F)

Storage Temperature

–40°C to +70°C (–40°F to +158°F)

Operating Humidity

10% to 90% RH (non-condensing)

Altitude

At an altitude between 1800 m (5,905.51 ft) and 5000 m (16,404.20 ft), every time the altitude

increases by 200 m (656.17 ft), the maximum temperature decreases by 1°C (1.82°F).

Max operating altitude: 5,000 m (16,404.20 ft)

Max storage altitude: 5,000 m (16,404.20 ft)

MTBF

> 299,000 hours

Weight

189.22 kg (417.16 lbs., with the fan)

Dimensions (W x D x

Without the cable management bracket: 442 mm x 1052 mm x 1345 mm (17.40 in. x 41.42 in. x

52.95 in.), 31 RU

With the cable management bracket: 442 mm x 1091 mm x 1345 mm (17.40 in. x 42.95 in. x

52.95 in.), 31 RU

The weight only includes that of the empty chassis and fan modules. The entire device's weight is subject to that of

the modules selected.

Hardware Installation and Reference Guide Product Overview

The RG-N18000-XH series switch is a class-A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

The switch is connected to the specified uninterruptible power supply (UPS) instead of the DC power grid. DC

tolerance: 188 V DC to 400 V DC.

This equipment is not suitable for use in locations where children are likely to be present.

This equipment is restricted to use in the machine room by the professional personal or maintainer.

All power cords need to be removed after power-off. For security concerns, shut down the chassis and then unplug

the power cord.

Be cautious of electric shock hazard. The fuse is in the neutral wire. Therefore, cut off the power supply to power

off phase conductors.

Product Appearance

The RG-N18018-XH is composed of the chassis, power system, modules, and heat dissipation system.

The power system provides 20 power module slots and supports power modules in N+1 redundancy mode. You are

advised to configure redundancy for power modules.

The RG-N18018-XH provides two supervisor module slots, 16 line card slots, and eight switch fabric module slots.

The supervisor modules support 1+1 redundancy. You are advised to configure redundancy for the supervisor

modules. You can select different line cards as needed.

The cooling system provides three fan modules on the rear of chassis. M18018XH-FAN supports fan redundancy.

Figure 1-1 Appearance of the RG-N18018-XH

Hardware Installation and Reference Guide Product Overview

Front Panel

Figure 1-2 Front Panel of the RG-N18018-XH

Hardware Installation and Reference Guide Product Overview

Note

①Model name

②Air intake of the power module

③Bracket

④Cable management bracket assembly

⑤Toggle switch

⑥Supervisor module slot

⑦Line card slot

⑧Anti-ESD wrist strap socket

Ensure that the supervisor module, line card, switch fabric module, and power module are removed from the

chassis before you move or transport the RG-N18018-XH chassis.

The chassis has two toggle switches in redundancy mode. If both switches are off, the power supply is disabled. If

either switch is on, the power supply is enabled.

Rear Panel

Figure 1-3 Rear Panel of the RG-N18018-XH

Hardware Installation and Reference Guide Product Overview

Note

①Grounding stud

②Power receptacle

③Captive screw

④Fan module LED

⑤Fan module slot

⑥Anti-ESD wrist strap socket

Power Supply

The RG-N18018-XH adopts both AC and DC power supply input: AC power supply input: The RG-PAH3000I-F power module

is supported. This power module supports power management. The supervisor module of the RG-N18018-XH can read

power supply information and implement flexible and intelligent power management. The RG-PAH3000I-F power module

has dual power inputs (AC+AC, HVDC+HVDC, or AC+HVDC).

When both power inputs meet the power supply requirement:

Adopt either power input in the case of AC + AC input.

Adopt either power input in the case of HVDC + HVDC input.

Adopt AC input in the case of AC + HVDC input (HVDC as the standby power input).

Hardware Installation and Reference Guide Product Overview

When only one power input meets the power supply requirement:

Adopt the AC input that meets the requirement in the case of AC + AC input.

Adopt the HVDC input that meets the requirement in the case of HVDC + HVDC input.

Adopt the AC or HVDC input that meets the requirement in the case of AC + HVDC input.

When an under-voltage or over-voltage occurs:

Switch over to the other power input channel if it meets the requirement.

Avoid switching over to the other power input channel if it does not meet the requirement. Instead, brownout is allowed.

When channel A restores while channel B is suppling power:

Switch over to channel A if it meets the requirement.

Avoid switching over to channel A if it does not meet the requirement. Instead, continue to use channel B.

The RG-N18018-XH supports dual power domains. To enhance overall stability and reliability, you are advised to

power on the power module through dual power domains.

Heat Dissipation System

The operating environment temperature of the RG-N18018-XH ranges between 0°C (32°F) and 40°C (104°F). The thermal

design must satisfy the requirement on the device's reliability in the temperature range while ensuring the device's safety

and maintainability. The RG-N18018-XH uses fans to draw air for forced convection cooling, ensuring that the device

works properly in the specified environment.

Figure 1-4 Ventilation and Heat Dissipation System of the RG-N18018-XH (Air Intake)

Dieses Handbuch passt für folgende Modelle

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-N18000-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7808C Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5100-24GT4SFP-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS5100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NIS Series Bedienungsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES Series Bedienungsanleitung

Ruijie

Ruijie RG-S5750-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IS2712G Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6220-48XS6QXS-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES126S-LP Bedienungsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6520 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung