Ruijie RG-NBS3100 Series Installations- und Betriebsanleitung

Ruijie RG-NBS3100 Series Switches

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

1 Product Overview

RG-NBS3100 Series Switches

Model

10/100/1000

Base-T Ethernet Port

1000Base-X SFP

Port

Console Port

Fan

Power

Supply

RG-NBS3100-2

4GT4SFP

N/A

Single

RG-NBS3100-2

4GT4SFP-P

24 (Support PoE+)

N/A

Single

RG-NBS3100-8

GT2SFP

N/A

Power

adapter

RG-NBS3100-8

GT2SFP-P

8 (Support PoE+)

N/A

Single

SFP port is downward compatible with 100Base-FX.

1000Base-T is downward compatible with 100Base-TX and 10Base-T.

1.1 RG-NBS3100-24GT4SFP

Technical Specifications

Model

RG-NBS3100-24GT4SFP

CPU

Built-in CPU, single-core processor, 500MHz

Flash Memory

16 MB

SDRAM

DDRIII 256MB

Optical Module

See Appendix B.

The copper cable is not supported.

The supported module type may change at any time. Consult Ruijie Networks for the latest

information.

SFP Port

1000Base-X

100Base-X

Power Supply

AC input

Rated voltage range: 100V to 240V

Maximum voltage range: 90V to 264V

Frequency: 50/60 Hz

Rated current: 0.6A

Input Leakage

Current

≤3.5mA

EEE

Supported

PoE

Not supported

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

Power

Consumption

21W

Temperature

Operating temperature: 0 ºC to 50ºC

Storage temperature: -40 ºC to 70ºC

Humidity

Operating humidity: 10% to 90% RH

Storage humidity: 5% to 95% RH

Fan

Not supported

Temperature

Alarm

Not supported

EMC Standards

GB9254-2008

EN 55032

EN 61000-3-2

EN 61000-3-3

EN 55035

ETSI EN 300 386

Security

Standards

GB4943-2011

EN 62368-1

Dimensions

(W x D x H)

440 mm x 165 mm x 44 mm

Weight

≤2.4 kg

The RG-NBS3100-24GT4SFP switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

Product Appearance

On the front panel, the RG-NBS3100-24GT4SFP Ethernet switch provides 24 10/100/1000Base-T Ethernet ports and 4

SFP ports. On the back panel, it provides an AC power port.

Figure 1-1 Appearance of RG-NBS3100-24GT4SFP

Front Panel

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

Figure 1-2 Front Panel of RG-NBS3100-24GT4SFP

Note:

1. System status LED

2. Reset button

3. 10/100/1000 Base-T Ethernet port

4. 1000Base-X SFP port

The switch reboots after the reset button is pressed for less than 2 seconds.

The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the

status LED blinks).

Back Panel

Figure 1-3 Back Panel of RG-NBS3100-24GT4SFP

Note:

1. Power cord retention clips

2. Three-hole AC power receptacle

3. Protective earthing terminal

This device relies on the separate protective earthing terminal.

The device installation shall be permanently connected to building earth by a skilled person.

The device shall be intended to be used in a location having equipotential bonding(such as a telecommunication

centre, a dedicated computer room, or a restricted access area).

Heat Dissipation

RG-NBS3100-24GT4SFP adopts natural heat dissipation, thereby ensuring normal function of the device in the

specified environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to

allow air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

LED

Panel Identification

State

Meaning

System status LED

Status

Off

The switch is not receiving power.

Blinking green

The switch is running, but is not connected to

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

LED

Panel Identification

State

Meaning

(0.5Hz)

Ruijie Cloud.

Blinking green

(10Hz)

The switch is being upgraded or initialized.

Solid green

The switch is connected to Ruijie Cloud.

10/100/1000Base-T

Ethernet port status

LED

1-24

Off

The port is not connected.

Solid green

The port is connected at 10/100/1000 Mbps.

Blinking green

The port is receiving or transmitting traffic.

SFP port status LED

25-28

Off

The port is not connected.

Solid green

The port is connected at 100/1000 Mbps.

Blinking green

The port is receiving or transmitting traffic.

1.2 RG-NBS3100-24GT4SFP-P

Technical Specifications

Model

RG-NBS3100-24GT4SFP-P

CPU

Built-in CPU, single-core processor, 500MHz

Flash Memory

16 MB

SDRAM

DDRIII 256MB

Optical Module

See Appendix B.

The copper cable is not supported.

The supported module type may change at any time. Consult Ruijie Networks for the latest

information.

SFP Port

1000Base-X

100Base-X

Power Supply

AC input

Rated voltage range: 100V to 240V

Maximum voltage range: 90V to 264V

Frequency: 50/60 Hz

Rated current: 6A

Input Leakage

Current

≤3.5mA

EEE

Supported

PoE

Supports PoE and PoE+.

Ports 1-24 are PoE-capable with the maximum power output of 30W per port.

The overall maximum output power of PoE/PoE+ is 370W.

PoE Mode

Mode A (data pairs 1-2 and 3-6)

Power

Consumption

21W with no PoE load;

443W with PoE full load

Temperature

Operating temperature: 0 ºC to 50ºC

Storage temperature: -40 ºC to 70ºC

Humidity

Operating humidity: 10% to 90% RH

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

Storage humidity: 5% to 95% RH

Fan

Supported

Temperature

Alarm

Not supported

EMC Standards

GB9254-2008

EN 55032

EN 61000-3-2

EN 61000-3-3

EN 55035

ETSI EN 300 386

Security

Standards

GB4943-2011

EN 62368-1

Dimensions

(W x D x H)

440 mm x 293 mm x 44 mm

Weight

≤4.5 kg

The RG-NBS3100-24GT4SFP-P switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

The high temperature label indicates that the devie should be installed in the restricted area when the

ambient temperature exceeds 50 deg C.

Product Appearance

On the front panel, the RG-NBS3100-24GT4SFP-P Ethernet switch provides 24 10/100/1000Base-T Ethernet ports and

4 SFP ports. On the back panel, it provides an AC power port.

Figure 1-4 Appearance of RG-NBS3100-24GT4SFP-P

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

Front Panel

Figure 1-5 Front Panel of RG-NBS3100-24GT4SFP-P

Note:

1. System status LED

2. PoE mode switch-over button

3. Reset button

4. 10/100/1000 Base-T Ethernet port

5. 1000Base-X SFP port

The switch reboots after the reset button is pressed for less than 2 seconds.

The switch restores the default factory settings after the reset button is pressed for more than 5 seconds (until the

status LED blinks).

When the button is turned to the left position (Mode 1), the LED indicates the switching status of the port; when the

LED is solid green, it indicates that the link is up; when the LED blinks green, data is being transmitted or received.

When the button is turned to the right position (Mode 2), the LED indicates the PoE status of ports; when the LED

is solid green, it indicates that the PoE-supported ports are supplying power; when the LED blinks green, the

power of the ports is overloaded.

Back Panel

Figure 1-6 Back Panel of RG-NBS3100-24GT4SFP-P

Note:

1. Power cord retention clips

2. Three-hole AC power receptacle

3. Protective earthing terminal

This device relies on the separate protective earthing terminal.

The device installation shall be permanently connected to building earth by a skilled person.

The device shall be intended to be used in a location having equipotential bonding(such as a telecommunication

centre, a dedicated computer room, or a restricted access area).

Heat Dissipation

RG-NBS3100-24GT4SFP-P adopts fans for heat dissipation, thereby ensuring normal function of the device in the

specified environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to

allow air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

Figure 1-7 Flow Scheme of Heat Dissipation

Ruijie RG-NBS3100 Series Switches Hardware Installation and Reference Guide Product Overview

LED

Panel Identification

State

Meaning

System status LED

Status

Off

The switch is not receiving power.

Blinking green

(0.5 Hz)

The switch is running, but the alarm of

insufficient PoE power prompts.

Blinking green

(10Hz)

The switch is being upgraded or initialized.

Solid green

The switch is connected to Ruijie Cloud.

10/100/1000Base-T

Ethernet port status

LED

1-24

Off

The port is not connected.

Solid green

The port is connected at 10/100/1000 Mbps.

Blinking green

The port is receiving or transmitting traffic at

10/100/1000 Mbps.

RJ45 port PoE

status LED

1-24

Off

PoE is not enabled.

Solid green

PoE is enabled. The port is operational.

Blinking green

The port has a PoE fault of overload.

SFP port status LED

25F-28F

Off

The port is not connected.

Solid green

The port is connected.

Blinking green

The port is receiving or transmitting traffic.

1.3 RG-NBS3100-8GT2SFP

Technical Specifications

Model

RG-NBS3100-8GT2SFP

CPU

Built-in CPU, single-core processor, 500 MHz

Flash Memory

16 MB

SDRAM

DDRIII 256 MB

Optical Module

See Appendix B.

Andere Handbücher für RG-NBS3100 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie XS-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RGOS 11.X Bedienungsanleitung

Ruijie

Ruijie RG-S7600 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S29 Series Installationshandbuch

Ruijie

Ruijie RG-NBS3200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6910-3C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5000-E Series Anleitung zur Verwendung

Ruijie

Ruijie Reyee RG-ES Series Bedienungsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S3760E Series Bedienungsanleitung

Ruijie

Ruijie RG-S5000-24GT4MS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6220-H Series Bedienungsanleitung

Ruijie

Ruijie HS2310-16GH2GT1XS Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83-PD Series Bedienungsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6120 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung