Ruijie RG-S7600 Series Installations- und Betriebsanleitung

RG-S7600 Series Switches

Hardware Installation and Reference Guide

Document version: V1.0

Date: 2023-08-11

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this

document or any portion of this document, in any form or by any means, without the prior written

consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their

respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some

or all of the products, services or features described in this document may not be within the scope of

your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any

express or implied statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from

time to time. Ruijie Networks reserves the right to modify the content of the document without any

notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not

shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or

errors.

RG-S7600 Series Switch Hardware Installation and Reference Guide

Technical support hotline: 4008-111-000

http://webchat.ruijie.com.cn

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and service engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support email: [email protected]

Skype: [email protected]

Conventions

1. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can

result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in

function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will

not lead to serious consequences.

RG-S7600 Series Switch Hardware Installation and Reference Guide

Technical support hotline: 4008-111-000

http://webchat.ruijie.com.cn

Specification

An alert that contains a description of product or version support.

2. Note

The manual offers configuration information (including model, port type and command line interface)

for indicative purpose only. In case of any discrepancy or inconsistency between the manual and the

actual version, the actual version prevails.

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 1 -

1 Introduction to the RG-S7600

RG-S7600 series switches are next-generation and ultra-high-density core switches developed by Ruijie

Networks for all-optical network scenarios. By leveraging CWDM technology, the RG-S7610 series switch

integrates 10 SFG/SFX interfaces in a 1 RU space (equivalent to 80 SFP interfaces or 80 SFP+ logical

interfaces), and the RG-S7620 series switch integrates 20 SFG/SFX interfaces in a 2 RU space (equivalent

to 160 SFP interfaces or 160 SFP+ logical interfaces).

The RG-S7600 series switches are available in four models and support two expansion modules.

Table 1-1 Host Configuration

Model

1000M

SFG

Etherne

t Port

10GE

SFX

Etherne

t Port

100GE

QSFP28

Etherne

t Port

Mana

geme

Port

Cons

ole

Port

USB

Port

Expans

ion

Module

Slot

Fan

Module

Redund

ancy

Power

Module

Redun

dancy

RG-S761

0-10SFG

2CQ

N/A

3+1

1+1

RG-S761

0-10SFX

2CQ

N/A

3+1

1+1

RG-S762

0-20SFG

2CQ

N/A

2+1

1+1

RG-S762

0-20SFX

2CQ

N/A

2+1

1+1

Table 1-2 Expansion Module Configuration

Model

10/100/1000Base-T Port

with Auto-Negotiation

25GE SFP28

Ethernet Port

100GE QSFP28

Ethernet Port

M7600-4GT4VS

N/A

M7600-2CQ

N/A

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 2 -

Note

The 10GE SFX module is backward compatible with 1000M.

SFP28 ports support 25G/10Gbase-R and 1000base-X, but do not support FEC-RS.

The QSFP28 port can work in 100GE or 40GE mode. The 100GE port can be split into four 25GE ports,

and the 40GE port can be split into four 10GE ports.

The RG-S7600 series switches do not support the V-03281042-620 optical module.

25GE/100GE Ethernet ports of the RG-S7600 do not support Direct Attach Copper (DAC) cables.

Caution

In a domestic environment, this product may cause radio interference in which case the user may be

required to take adequate measures.

This device is not suitable for use in locations where children are likely to be present.

The device has the lithium battery:

1. Replacing the battery with the incorrect type may cause explosion or danger. If the battery is

damaged, replace it with the same type.

2. Exposing the battery to extremely high temperatures and/or extremely low air pressure may cause

the battery to explode or leak flammable liquids or gases.

3. Throwing the battery into a fire or oven, or mechanically crushing or cutting it may cause the

battery to explode.

1.1 RG-S7610-10SFG2CQ

Technical Specifications

Model

RG-S7610-10SFG2CQ

CPU

2.0 GHz quad-core processor

BootROM

16 MB

Flash Memory

8 GB

SDRAM

DDR4 4 GB

Expansion Module

Slot

Supported

Expansion Module

Type

M7600-2CQ or M7600-4GT4VS

Fan Module Slot

4 (3+1 redundancy, and at least three fan modules required)

Fan Module Type

S7610-FAN I-F

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 3 -

Power Module Slot

2 (1+1 redundancy)

Power Module Type

RG-PA550I II-F

Note: The power module is sold and shipped separately. The switch chassis

packaging does not include the power module. The power module must be

ordered to ensure the switch can work properly.

Input Power

AC input:

Rated voltage range: 100 V AC to

240 V AC

Maximum voltage range: 90 V AC

to 264 V AC

Frequency: 50 Hz to 60 Hz

Rated input current range: 7.2 A to

3.5 A

HVDC input:

Input voltage range: 192 V DC to

288 V DC

Rated input current: 3.6 A

Maximum Power

Consumption

270 W

Optical Module Type

See Appendix A.

The supported optical module types may update without prior notice.

Please contact Ruijie Networks for details.

Temperature Alarm

Temperature alarm and over-temperature protection

EMC

GB/T 9254.1

Safety Standard

GB4943.1

Operating

Temperature

0ºC to 45ºC (32ºF to 113ºF)

Storage

Temperature

–40ºC to +70ºC (–40ºF to +158ºF)

Operating Humidity

10% to 90% RH (non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

Altitude

0 m to 1800 m (0 ft. to 5905.51 ft.)

Weight

6.88 kg (15.17 lbs) (fan modules included during delivery, without power

modules, expansion modules, and packaging)

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 4 -

Dimensions (W x D x

442 mm x 388 mm x 44 mm (17.40 in. x 15.28 in. x 1.73 in.), 1 RU

Warning

In a domestic environment, this product may cause radio interference in which case the user may be

required to take adequate measures.

The nameplate is on the bottom of the chassis.

Nameplate style:

1.1.1 Appearance

The RG-S7610-10SFG2CQ consists of the chassis, power supply system, and cooling system.

The power supply system has four power module slots and supports 1+1 redundancy. You are

advised to configure power redundancy.

The cooling system has eight fan module slots and supports 3+1 fan redundancy. You are advised to

configure fan redundancy.

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 5 -

Figure 1-2 Appearance of the RG-S7610-10SFG2CQ

1.1.2 Front Panel

Figure 1-3 Front Panel of the RG-S7610-10SFG2CQ

Note:

1. Console port

2. System status LED

3. Power module LED

4. Fan module LED

5. MGMT port status

LED

6. MGMT port

7. USB 2.0 port

8. Breathing LED switching

control button

9. Upper and lower row

port breathing LED

10. SFG port

11. SFG port status LED

12. 100GE QSFP28 port

13. Expansion module slot

1.1.3 Rear Panel

Figure 1-4 Rear Panel of the RG-S7610-10SFG2CQ

Note:

①Power module slot 1

②Fan module slot 1

③Fan module slot 2

④Fan module slot 3

⑤Fan module slot 4

⑥Power module slot 2

RG-S7600 Series Switch Hardware Installation and Reference Guide

- 6 -

1.1.4 External Ports

The RG-S7610-10SFG2CQ provides the following ports:

USB port: The USB port is used to connect a USB flash drive to store logs, software versions, alarms,

and other diagnostic information, which can be easily used for online upgrade of device software and

storage of log information.

Console port: The console port is an RS-232 port that uses an RJ45 connector. The console port is

used to connect to the serial port of the background computer for commissioning, configuration,

maintenance, management, and program loading.

MGMT port: The MGMT port is an out-of-band Ethernet port that uses an RJ45 connector. This port

can be connected to an Ethernet port of a PC to download programs. You can manage and maintain

the device remotely by connecting the management port to the Ethernet port of a PC with an

Ethernet cable.

SFG port: There are 10 SFG ports. Each SFG port supports 8 x 1000M logical ports.

QSFP28 port: There are two 100GE QSFP28 ports that support optical modules and AOC cables. It can

work in 100GE or 40GE mode. The 100GE port can be split into four 25GE ports, and the 40GE port

can be split into four 10GE ports.

Caution

To ensure data security and prevent damage to your device, use USB flash drives of well-known

brands and good quality. The USB port is compatible with most USB controllers and may not

recognize some models of USB flash drives.

The RG-S7610-10SFG2CQ supports configuration, maintenance, management, program loading, and

system debugging through the console.

Table 1-3 LEDs

LED

Panel

Identificatio

Status

Description

System status

Status

Off

The system is not powered on.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Bedienungsanleitung

Ruijie

Ruijie HS2310-16GH2GT1XS Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5000-E Series Anleitung zur Verwendung

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600E Series Bedienungsanleitung

Ruijie

Ruijie RG-S2915-L Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6520 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2928G-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5750-S Series Installations- und Betriebsanleitung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie RG-S3250E Series Bedienungsanleitung

Ruijie

Ruijie RG-ES109DS Bedienungsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Handbuch

Ruijie

Ruijie RG-NBS5200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6220-48XS6QXS-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IF2920U-12GT1XS Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung