Ruijie RG-S6910-3C Series Installations- und Betriebsanleitung

Ruijie RG-S6910-3C Series Switches

Hardware Installation and Reference Guide

RuijieNetworks reserves allcopyrights ofthis document.Any reproduction,excerption,backup,modification,

transmission,translationorcommercialuseofthis documentoranyportion of this document,inany form or by any

means,withoutthe priorwritten consentof Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latestinformationthroughtheRuijieNetworks website.RuijieNetworks endeavors toensurecontentaccuracyand

willnot shoulderanyresponsibilityfor losses and damages causedduetocontentomissions,inaccuraciesorerrors.

Preface

Thank you for usingourswitches.This guidewillhelpyouinstallanduse theswitches.

Scope

This manualdescribesthe functions andphysical features ofthe switches,and presentstheinstallationprocedure,

troubleshootingprocedure,technicalspecifications,andspecificationsandusages rulesofcables andconnectors.Itis

intendedfor the users thathave some experienceininstalling andmaintainingnetworkhardware andwanttolearnthe

above information.At the same time,itis assumed thatthe users ofthis switcharealreadyfamiliarwiththe relatedterms

and concepts of Ethernet.

Document Structure

Chapter1 "Product Overview" describes the maincharacteristics,technicalspecifications,andrelatedmodulesof

this product.

Chapter2 "Preparation before Installation" lists the safety, powersupply, andsite requirementsthatmustbe met

beforethe switchcan beinstalled.

Chapter3 "Product Installation" describes howtoinstalltheintegratedswitchandmodules,andconnectits power

cables andgroundinglines.

Chapter4 "System Debugging" describesthecommissioningafterthe switchis poweredon for the firsttime.

Chapter5 “Monitoring and Maintenance”

Chapter5 "Troubleshooting" describes possibleproblemsmetduringtheinstallationand useofthe switchand

solutions forsuchproblems.

AppendixA "Connectors and Connection Media"

AppendixB "Mini-GBIC, 10G, 40G and 100GModules"

AppendixC “Lightening Protection”

AppendixD “Cabling Recommendations in Installation”

AppendixE “Site Selection”

Obtaining Technical Assistance

RuijieNetworks Website:https://www.ruijienetworks.com/

TechnicalSupportWebsite:https://ruijienetworks.com/support

CasePortal:https://caseportal.ruijienetworks.com

Community:https://community.ruijienetworks.com

TechnicalSupportEmail:service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Related Documents

Documents

Description

ConfigurationGuide

Describes networkprotocolsandrelated mechanismsthatsupportedbythe

product, with configurationexamples.

CommandReference

Describes the relatedconfiguration commands,including commandmodes,

parameterdescriptions,usageguides,andrelatedexamples.

Symbol Conventions

Means readertake note. Notes containhelpful suggestionsorreferences.

Means reader be careful. In this situation,you mightdo somethingthatcouldresultin equipmentdamageorloss of

data.

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 3 -

1 Product Overview

RG-S6910-3C series switches are data center oriented high density 100G core switches, providing 100Gaccess, low

latency, and complete data center features. RG-S6910-3C series switches provide 96 100G ports and can be used with

other aggregationswitches tocompose ahigh-performanceandhigh-reliabilitydatacenter network.

Model

100G QSFP28

Ethernet Port

25G/10G SFP28

Ethernet Port

10GBase-

Expansion

Module Slot

Redundant

Fan

Redundant

PowerSupply

RG-

S6910-3C

5+1

2+2

M6900-

32CQ

A QSFP28 port supports 100G/40Gmode and4x25G/4x10G mode.

1.1 RG-S6910-3C

Specifications

Model

RG-S6910-3C

CPU

Quad-core eight-threadCPU processer,2.2 GHz, Intel Xeon D-1527

L2 Cache

16 MB

eMMC

64 GB

SDRAM

DDR416 GB

MAC Cache

16 GB

Expansion

Module Slot

Expansion

Module

M6900-32CQ

Fan Slot

6 (support5+1redundancy, configure at least5 fan modules in one switch)

Fan Module

M2EFAN I-F

PowerSupply

Slot

4 (support2+2redundancy)

PowerModule

RG-PA1200I-F

PowerSupply

Input

AC input

Ratedvoltage range: 100 VAC to 127VAC

Frequency: 50 Hz to 60 Hz

Ratedcurrent: 12 A

Ratedvoltage range: 200VAC to 240VAC

Frequency: 50 Hz to 60 Hz

Ratedcurrent: 9.6 A Max

Highvoltage direct current(HVDC) input:

Input voltage range:192 VDC to 288VDC

Input current range:6 A

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 4 -

Power

Consumption

Static power: 760 W, typical power: 1092 W, powerwith fullload: 2046 W

Optical Module

Refer toAppendix B

The supportedmodulesupdateatany time,contact RuijieNetworks fordetails.

SFP28 Port

Unsupported

QSFP28 Port

Supported.The numberofports depends ontheexpansionmodule.

10GBASE-T Port

Unsupported

Temperature

Warning

Supporttemperaturewarningandover-heating protection.

EMC Standards

GB9254-2008CLASS A

SafetyStandards

GB4943-2011

Working

Temperature

0 °C to 40 °C (32°F to 104 °F)

Storage

Temperature

-40 °C to 70 °C(-40 °F to 158 °F)

Working Humidity

10%to 90%RH (non-condensing)

Weight

Netweight:42kg (92.60 lbs,with 6fan modules ,4 powermodulesand3 M6900-32CQmodules)

Dimensions

(W x D x H)

442mmx 735mmx 173.6mm,4RU (17.40 in. x 28.93 in.x 6.83 in.)

RG-S6910-3C switchis a class A product. In a domesticenvironment,this product maycause radio interference in

whichcasethe usermaybe required to take adequate measures.

The 100G Ethernet port of the RG-S6910-3Cswitchsupports DAC. For a detailed modeland specification,refer to

AppendixB.

Product Appearance

The hardwareof the RG-S6910-3Cincludes thechassis,thepowersupplysystem and theheat dissipation system.

The power supply system: Provides four power supply slots, which support 2+2 power supply redundancy. It is

recommended users configurepowersupplyredundancy.

The heat dissipationsystem:Provides sixfan module slots,whichsupport5+1 fan redundancy. It is recommended

users configureall fans redundancy.

Figure1-1 Appearanceof the RG-S6910-3C

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 5 -

Front Panel

Figure1-2 Front Panel of the RG-S6910-3C

Notes:

1. EngineSlot

2. USB Port

3. MGMT Port

4. MGMT Indicator

5. ConsolePort

6. System Status Indicator

7. FIND Status Indicator

8. Expansion Module Slot

9. Mounting Bracket

Rear Panel

Figure1-3 RearPanel of the S6910-3C

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 6 -

Notes:

1. Fan Module Slot

2. Fan Indicator

3. PowerModule Slot

4. GroundingPoint

5. ESD WristStrap

6. AssetTag

Asset Tag

The assetmanagementlabelis in the lowerleft corner of the rear panel.The labelis movableandcan be removed from

the device. Users can mark the informationsuchas assetname,category, code and registrationdateon the labelwhich

helps toimprove assetmanagementaccuracyand efficiency.

Figure1-4 AssetTag of the RG-S6910-3C

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 7 -

External Ports

The RG-S6910-3Cprovides thefollowingports:

Universalserial bus (USB)port:This port canconnect withUSB memoryto save logs, switchversions,warnings

andother diagnosticmessages.Therefore,it is moreconvenientto upgradethe softwareversion ofthe switchon

lineandsave the loginformation.

To protect the data and avoid device damage,usequalifiedUSBflash disks of good brands.At the sametime,the

localUSB port is compatible withmostofthe USB controllers exceptsome USBflashdisks.

RG-S6910-3C series switches support debugging, configuration, maintenance, management and switch software

uploadingofConsoleports.

Consoleport:UseRS-232interfaceelectrical level andstandardRJ45connector.This interfaceis connected with

the serialportof terminalPC to perform system debugging,configuration,maintenance,management,and switch

software uploading.

MGMT port:This is an out-bandEthernet port, whichuses standardRJ45connector.This interfaceis connected

with Ethernetport of a PC to perform program downloading.

QSFP28 port: Thereare 96 100G QSFP28 ports whichsupportoptical modulesand DAC coppercables.These

ports can workin 100G/40G modeand 4x25G/4x10G mode.

Panel Indicators

Indicator

Panel

Identification

Status

Meaning

System Status

Indicator

SYS

Off

The system is notpowered on.

Solidred

System failure.

Blinkinggreen.

The system is beinginitialized.

Solidgreen

The system works properly.

Solidyellow

There is system alarm.

LocationIndicator

FIND

Solidgreen

The device is not being found.

Blinkingred

The device is to be found.

MGMT Port Indicator

Link/ACT

Off

The port is down.

Green

The port is connected at 1000Mbps.

Yellow

The port is connected at 100Mbps.

Blinking

The port is transmitting orreceiving data.

FAN Indicator

Fan Status Indicator

Status

Off

The fan modules are notpoweredon.

Solidgreen

The fan modules workproperly.

Solidred

The fan modules donotworkproperly.

Indicators on AC are Specified by Upstream Vendor

PowerIndicator

Off

The AC is not poweredon.

Solidgreen

The powermoduleworks properly.

RG-SS6910-3C Series Switch Hardware Installation and Reference Guide Product Overview

- 8 -

Blinkinggreen

(1Hz)

The poweris PS off, 12VBS.

The power is in cold backup status and does not

output power.

Solidred

An error occurs, e.g., overcurrent, overvoltage or fan

fault.

The AC powerin redundancyis pluggedout.

Blinkingred(1Hz)

An alarm is generated but the power module keeps

working. The alarm may be caused by high power,

high current, high temperature, or low fan rotation

speed.

Port Indicator

QSFP28 Port Indicator

Link/Act

Off

The port is not connected.

Solidgreen

The port is connected at 100Gbps.

Blinkinggreen

The port is transmitting orreceiving data at 100Gbps.

When the deviceworks properly,its FINDindicatoris solidgreen.IftherearetoomanyRG-S6910-3Cseriesswitches

to locate a specific device, you can run the led-blink enable/disable command to configure the FIND indicator to

blinkat 1Hz in red, soas to locate the device.

Power Supply

The RG-S6910-3Cseries switchessupportRG-PA1200I-Fpowersupplymodule.Thesmartpowersupplymodule

supports powermanagement,andthe switch can readinput power,inputcurrent, and temperature in realtime.The

powersupplymodulesupports hotswapping.

The RG-S6910-3Cseries switches support2+2 powersupplyredundancy. To improvethe stabilityandreliabilityof

the entire system, it is recommended to configure 2+2 power supply redundancy. When the four power supply

modules worknormally,the switchis in the status ofcurrentsharing.

It requires at leasttwo powersupplymodules to work normally.Filler panels needto be installedinthe unoccupied

powersupplymoduleslots toensureventilationandheatdissipation andavoiddusts.

Heat Dissipation

The workingtemperature ofthe RG-S6910-3Cswitches is 0°Cto40°C (32°F to 104°F), and the heat dissipation design

needs toensurethestability,safety andmaintainabilityinsuch environment.TheRG-S6910-3Cseries switches adopt

fan ventilationand forcedconvection to ensurethe device can work normallyin specifiedenvironment.Dustthedevice

every three months toavoid blockingthe ventilationopenings.

The RG-S6910-3Cswitch supports M2EFAN I-F andprovides fan speedregulation,fanfailurewarning,andfan hot

swapping.

Figure1-5 Ventilation and Heat Dissipation ofthe RG-S6910-3C Switch

Andere Handbücher für RG-S6910-3C Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie Reyee RG-ES105D Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS85 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6120 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS3100-48GT4SFP-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-P Bedienungsanleitung

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie RG-S5000-24GT4MS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1930J Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES206GS-P Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E-AC DCN Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-N18000-E Series Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung