Ruijie XS-S1930J Series Installations- und Betriebsanleitung

Ruijie XS-S1930J Series Switches

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

⚫Ruijie Networks Website: https://ruijie.co.jp/

⚫Technical Support Website: https://ruijienetworks.com/support

⚫Case Portal: https://caseportal.ruijienetworks.com

⚫Community: https://community.ruijienetworks.com

⚫Technical Support Email: [email protected]

⚫Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that

supported by the product, with configuration examples.

Command Reference

Describes the related configuration commands, including

command modes, parameter descriptions, usage guides, and

related examples.

Symbol Conventions

The symbols used in this document are described as below:

This symbol brings your attention to some helpful suggestions and references.

This symbol means that you must be extremely careful not to do some things that may damage the device or cause

data loss

Hardware Installation and Reference Guide

Product Overview

1 Product Overview

XS-S1930J series switches process different service flows based on various applications to ensure no latency for key

data transmission, mainly used in medium and small-sized enterprises. XS-S1930J series switches provide flexible media

interfaces to cater to diverse requirements.

Table 1-1 XS-S1930J Switch

Model

10/100/1000

Base-T

Ports

PoE Ports

1000Base-X

SFP Ports

Console

Port

Power Supply

XS-S1930J-48GT4SFP

One fixed power supply

XS-S1930J-24GT4SFP/2GT

4 (2 combo

ports)

One fixed power supply

XS-S1930J-18GT2SFP

One fixed power supply

XS-S1930J-18GT2SFP-P

Ports 1-16,

which support

15 W/30 W.

One fixed power supply

XS-S1930J-8GT2SFP

One fixed power supply

XS-S1930J-8GT2SFP-P

Ports 1-8,

which support

15 W/30 W

One fixed power supply

The 1000Base-T ports are downward compatible with 100Base-T and 10Base-T.

A combo port consists of a 1000Base-X SFP port and a 100/1000Base-T port. The two ports cannot work

simultaneously.

XS-S1930J-48GT4SFP

Technical Specifications

Model

XS-S1930J-48GT4SFP

CPU

Built-in CPU, single-core processor, 700 MHz

BOOTROM

Flash Memory

32 MB+32 MB

SDRAM

DDRIII 256 MB

Optical Module and

Cables

For details, see Appendix B. (Copper cables are not supported.)

The supported module type may change at any time. Consult us for the latest information.

Power Supply

◼AC input:

Rated voltage range: 100 to 240 VAC

Maximum voltage range: 90 to 264 VAC

Frequency: 50/60 Hz

Rated current: 0.5 A

Hardware Installation and Reference Guide

Product Overview

Input Leakage

Current

≤3.5 mA

EEE

Support

PoE

Not support

Max Power

Consumption

(220 VAC)

40 W

Operating

Temperature

-10°C to 50°C (14°F to 122°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Operating Humidity

10% to 90% RH

Storage Humidity

5% to 95% RH

Fan

Fanless

Temperature

Warning

Not support

EMC Standards

EN55032, EN55035, VCCI-A

Security Standards

GB4943-2011, EN62368

Dimensions

(W x D x H)

440 mm x 208 mm x 44 mm (17.32 in. x 8.19 in. x 1.73 in.)

Weight

2.8 kg

The XS-S1930J-48GT4SFP switch is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあります。この場

合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A

Product Appearance

On the front panel, the XS-S1930J-48GT4SFP switch provides 48 10/100/1000Base-T Ethernet ports and 4 SFP ports.

On the back panel, it provides an AC power socket.

Figure 1-1 XS-S1930J-48GT4SFP Appearance

Hardware Installation and Reference Guide

Product Overview

Front Panel

Figure 1-2 Front Panel of XS-S1930J-48GT4SFP

Note

1. 10/100/1000Base-T Ethernet port

2. System status LED

3. Power status LED

4. Console port

5. SFP port

Back Panel

Figure 1-3 Back Panel of XS-S1930J-48GT4SFP

Note

1. Grounding pole

2. Power cord retention clip

3. Three-pin AC power socket

Power Supply

⚫AC Input

Rated voltage range: ～100 to 240 VAC, 50/60 Hz

Maximum voltage range: ～90 to 264 VAC, 47 Hz to 63 Hz

Hardware Installation and Reference Guide

Product Overview

Frequency: 50/60 Hz

Rated current: 0.5 A

Power cord: 10 A

Heat Dissipation

The XS-S1930J-48GT4SFP is designed to be fanless and provides natural heat dissipation, thereby ensuring normal

function of the device in the specified environment. Maintain a minimum clearance of 10cm around the device to allow air

circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

LEDs

LED

Panel Identification

State

Meaning

Power status LED

Power

Solid green

The switch is powered on.

Off

The switch is powered off.

System status LED

Status

Off

The switch is powered off.

Blinking green

The switch is being initialized.

Continuous blinking indicates errors.

Solid green

The switch is operational.

1000 Mbps RJ-45

port status LED

1-48

Off

The port is not connected.

Solid green

The port is connected at 1000 Mbps.

Solid yellow

The port is connected at 10/100 Mbps.

Blinking green

The port is receiving or transmitting data at 1000

Mbps.

Blinking yellow

The port is receiving or transmitting data at

10/100 Mbps.

1000 Mbps SFP port

status LED

49-52

Off

The port is not connected.

Solid green

The port is connected at 100/1000 Mbps.

Blinking green

The port is receiving or transmitting data at

100/1000 Mbps.

XS-S1930J-24GT4SFP/2GT

Technical Specifications

Model

XS-S1930J-24GT4SFP/2GT

CPU

Built-in CPU, single-core processor, 500 MHz

BOOTROM

Flash Memory

64 MB

SDRAM

DDRIII 256 MB

Optical Modules

and Cables

For details, see Appendix B. (Copper cables are not supported.)

The supported module type may change at any time. Consult us for the latest information.

Power Supply

◼AC input:

Hardware Installation and Reference Guide

Product Overview

Rate voltage range: 100 to 240 VAC

Maximum voltage range: 90 to 264 VAC

Frequency: 50/60 Hz

Rated current: 0.5 A

Input Leakage

Current

≤3.5 mA

EEE

Support

PoE

Not support

Max Power

Consumption

(220 VAC)

17 W

Operating

Temperature

-5°C to 55°C (23°F to 131°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Operating Humidity

10% to 90% RH

Storage Humidity

5% to 95% RH

Fan

Fanless

Temperature

Warning

Not supported

EMC Standards

EN55032, EN55035, VCCI-A

Security Standards

GB4943-2011, EN62368

Dimensions

(W x D x H)

440 mm x 187 mm x 44 mm (17.32 in. x 7.36 in. x 1.73 in.)

Weight

2.5 kg

The XS-S1930J-24GT4SFP/2GT switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあります。この場

合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A

Product Appearance

On the front panel, the XS-S1930J-24GT4SFP/2GT switch provides 24 10/100/1000Base-T Ethernet ports and 4 SFP

ports, including 2 combo ports. On the back panel, it provides an AC power socket.

Figure 1-4 XS-S1930J-24GT4SFP/2GT Appearance

Hardware Installation and Reference Guide

Product Overview

Front Panel

Figure 1-5 Front Panel of XS-S1930J-24GT4SFP/2GT

Note

1. System status LED

2. Console port

3. 10/100/1000Base-T Ethernet port

4. 100/1000Base-T combo port

5. SFP port

Ports 25 and 26 are copper ports by default.

Back Panel

Figure 1-6 Back Panel of XS-S1930J-24GT4SFP/2GT

Note

1. Power cord retention clip

2. Three-pin AC power socket

3. Grounding pole

Power Supply

⚫AC Input

Rated voltage range: ～100 to 240 VAC, 50/60 Hz

Maximum voltage range: ～90 to 264 VAC, 47 Hz to 63 Hz

Hardware Installation and Reference Guide

Product Overview

Frequency: 50/60 Hz

Rated Current: 0.5 A

Power Cord: 10 A

Heat Dissipation

The XS-S1930J-24GT4SFP/2GT is designed to be fanless and provides natural heat dissipation, thereby ensuring normal

function of the device in the specified environment. Maintain a minimum clearance of 10cm around the device to allow air

circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

LEDs

LED

Panel Identification

State

Meaning

System status LED

Status

Off

The switch is powered off.

Blinking green

The switch is being initialized.

Continuous blinking indicates errors.

Solid green

The switch is operational.

1000 Mbps RJ-45

port status LED

1-26

Off

The port is not connected.

Solid green

The port is connected at 10/100/1000 Mbps.

Blinking green

The port is receiving or transmitting data at

10/100/1000 Mbps.

1000 Mbps SFP port

status LED

25F-28F

Off

The port is not connected.

Solid green

The port is connected at 100/1000 Mbps.

Blinking green

The port is receiving or transmitting data at

100/1000 Mbps.

XS-S1930J-18GT2SFP

Technical Specifications

Model

XS-S1930J-18GT2SFP

CPU

Built-in CPU, single-core processor, 500 MHz

BOOTROM

Flash Memory

64 MB

SDRAM

DDRIII 256 MB

Optical Modules

and Cables

For details, see Appendix B. (Copper cables are not supported.)

The supported module type may change at any time. Consult us for the latest information.

Power Supply

◼AC input:

Rate voltage range: 100 to 240 VAC

Maximum voltage range: 90 to 264 VAC

Frequency: 50/60 Hz

Rated current: 0.5 A

Input Leakage

Current

≤3.5 mA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS Series Bedienungsanleitung

Ruijie

Ruijie RG-CS85 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5200-24GT4XS-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83-24GT4XS-PD Installations- und Betriebsanleitung

Ruijie

Ruijie HS2310-16GH2GT1XS Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES200 Series Bedienungsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5760C-X Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RGOS 11.X Bedienungsanleitung

Ruijie

Ruijie RG-S7600 Series Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung