Ruijie RG-AP680-L Installations- und Betriebsanleitung

Ruijie RG-AP680-L Access Point

Hardware Installation and Reference Guide

Document Version: V1.0

Date: December 23, 2022

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this

document or any portion of this document, in any form or by any means, without the prior written consent of

Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of

the products, services or features described in this document may not be within the scope of your purchase or

use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support Email: [email protected]

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,

the actual version prevails.

Contents

Preface...................................................................................................................................................I

1 Product Overview...............................................................................................................................1

1.1 About the RG-AP680-L Access Point........................................................................................1

1.2 Hardware Features....................................................................................................................1

1.3 Package Contents......................................................................................................................3

1.4 Technical Specifications............................................................................................................4

1.4.1 Dimensions and Weight.................................................................................................4

1.4.2 Radio Specifications.......................................................................................................4

1.4.3 Port Specifications .........................................................................................................5

1.4.4 Power Supply and Consumption...................................................................................6

1.4.5 Environment and Reliability...........................................................................................6

1.5 LED and Button..........................................................................................................................7

1.6 Optical Module...........................................................................................................................8

2 Preparing for Installation..................................................................................................................10

2.1 Safety Precautions...................................................................................................................10

2.1.1 General Safety Precautions.........................................................................................10

2.1.2 Handling Safety............................................................................................................10

2.1.3 Electric Safety..............................................................................................................10

2.1.4 Storage Security...........................................................................................................11

2.2 Installation Environment Requirements...................................................................................11

2.2.1 Bearing Requirements.................................................................................................11

2.2.2 Ventilation Requirements.............................................................................................11

2.2.3 Space Requirements....................................................................................................11

2.2.4 Temperature/Humidity Requirements..........................................................................11

2.2.5 Cleanness Requirements.............................................................................................12

2.2.6 System Grounding Requirements................................................................................13

2.2.7 Anti-interference Requirements...................................................................................13

2.2.8 Lightning Protection Requirements..............................................................................13

2.2.9 Waterproof Requirements............................................................................................13

2.2.10 Other Requirements...................................................................................................14

2.3 Tools ........................................................................................................................................14

3 Installing the Access Point ...............................................................................................................15

3.1 Installation Flowchart...............................................................................................................15

3.2 Before You Begin.....................................................................................................................16

3.3 Precautions..............................................................................................................................17

3.4 Installing the Access Point.......................................................................................................17

3.4.2 Mounting the Access Point on a Pole..........................................................................18

3.4.3 Mounting the Access Point on a Ceiling......................................................................21

3.4.4 Removing the Access Point.........................................................................................24

3.5 Installing an Optical Module.....................................................................................................24

3.6 Installing the Cables ................................................................................................................24

3.6.1 Installing the Grounding Cable ....................................................................................24

3.6.2 Installing the Ethernet Cable........................................................................................25

3.6.3 Installing the Fiber-Optic Cable ...................................................................................26

3.6.4 Installing the Power Cord.............................................................................................27

3.7 Bundling Cables.......................................................................................................................27

3.7.1 Precautions..................................................................................................................27

iii

3.7.2 Bundling Description....................................................................................................27

3.8 Checklist After Installation .......................................................................................................28

3.8.1 Checking the Access Point..........................................................................................28

3.8.2 Checking Cable Connection........................................................................................28

3.8.3 Checking the Power Supply.........................................................................................28

4 Verifying Operating Status................................................................................................................29

4.1 Setting up Configuration Environment.....................................................................................29

4.2 Powering on the Access Point.................................................................................................29

4.2.1 Checklist Before Power-on..........................................................................................29

4.2.2 Checklist After Power-on (Recommended) .................................................................29

5 Monitoring and Maintenance............................................................................................................30

5.1 Monitoring................................................................................................................................30

5.1.1 LED..............................................................................................................................30

5.1.2 CLI Commands............................................................................................................30

5.2 Remote Maintenance...............................................................................................................30

5.3 Hardware Maintenance............................................................................................................30

6 Common Troubleshooting................................................................................................................31

6.1 General Troubleshooting Flowchart ........................................................................................31

6.2 Common Faults........................................................................................................................31

6.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In.........................31

6.2.2 LED Is Off for a Long Time..........................................................................................31

6.2.3 LED Is Steady Red.......................................................................................................31

6.2.4 LED Is Steady Green...................................................................................................32

6.2.5 LED Keeps Blinking Blue at an Interval of 0.2s (in Fit Mode) .....................................32

6.2.6 LED Does Not Turn Steady Blue or Blinking Blue.......................................................32

6.2.7 Clients Can Not Find the Access Point........................................................................32

7 Appendix...........................................................................................................................................33

7.1 Connectors and Media.............................................................................................................33

7.2 Cabling.....................................................................................................................................35

7.3 Optical Modules and Specifications.........................................................................................38

7.4 DC Connector Specifications...................................................................................................39

Hardware Installation and Reference Guide Product Overview

1 Product Overview

1.1 About the RG-AP680-L Access Point

The RG-AP680-L is a dual-radio and dual-stream access point designed to cover outdoor areas. Compliant with

the IEEE 802.11ax standard, the access point delivers a combined data rate of 2.975 Gbps, with up to 575

Mbps in the 2.4 GHz band and 2.4 Gbps in the 5 GHz band. The access point provides one 2.5 GE SFP port

and one 1GE electrical port.

1.2 Hardware Features

The RG-AP680-L access point provides two radio frequency (RF) connectors, one 10/100/1000 BASE-T

Ethernet port with auto-negotiation, one 2.5GE SFP port, one Console port, and one DC connector. The access

point can be powered by either PoE or DC power supply.

Figure 1-1 Front View of Access Point

Hardware Installation and Reference Guide Product Overview

Figure 1-2 Top View of Access Point

Figure 1-3 Side View of Access Point

Hardware Installation and Reference Guide Product Overview

Table 1-1 Button and Ports

No.

Item

Description

Console/Reset

The console port is used to manage devices.

The reset button is used to restart the access point or restore the

access point to factory settings.

DC Connector

Connected to the DC power supply

Ethernet/PoE Port

Uplink service port for data transmission, compliant with the IEEE

802.3af/at standard

LED

Indicates the system status, including one system status LED and

three RSSI LEDs

Grounding Screw

Secures the grounding cable

SFP Port

Uplink service port for data transmission

Note

The nameplate is at the bottom of the access point.

1.3 Package Contents

Table 1-2 Package Contents

Item

Quantity

RG-AP680-L Access Point

Mounting Plate Assembly (Including a mounting plate and a mounting arm)

Mounting Bracket

M5 Screw

M8 Screw

M6 x 50 mm Expansion Anchor

Hose Clamp

Cable Gland for Ethernet Cable

Cable Gland for Fiber-Optic Cable

Dust Cap

Grounding Cable

Warranty Card

Inhaltsverzeichnis

Andere Ruijie Drahtloser Zugangspunkt Handbücher

Ruijie

Ruijie Reyee RG-RAP Series Bedienungsanleitung

Ruijie

Ruijie RG-AP720-L Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MAP852V3 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP680-A Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP130(W2) V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP850-I-V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP740-I Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-RAP73HD Bedienungsanleitung

Ruijie

Ruijie RG-AP880-AR Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP740-I Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP520 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-RAP2200 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MAP852-SF-S Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AP710 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-AM5528-SF Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RAP1200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee Series Abmessungen

Ruijie

Ruijie RG-AP810-L Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-RAP1201 Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-RAP Series Bedienungsanleitung

Ruijie

Ruijie RG-AP630 IDA2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RAP6260-D Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-RAP52-OD Bedienungsanleitung

Ruijie

Ruijie Reyee Series Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung