Samson Q1 Bedienungsanleitung

CONDENSER MICROPHONE

OWNERS MANUAL

Thank you for purchasing the Samson Q1 Condenser Microphone.The Q1 con-

denser microphone brings a high level of accuracy and audio performance to

vocal miking applications.

The Q1 is a hand held condenser vocal microphone that excels in both live and

project studio applications. Equipped with a linear frequency response for superi-

or reproduction, it is also designed to withstand high sound pressure levels.

Extremely sensitive, it employs a tight cardioid pattern to reduce feedback.

A special shock-mounted element minimizes handling noise and provides addi-

tional protection.

Should your microphone ever require servicing, a Return Authorization number

(RA) must be obtained before shipping your unit to Samson.Without this number,

the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-

372-6766) for a Return Authorization number prior to shipping your unit. Please

retain the original packing materials and if possible return the unit in the original

carton and packing materials

Features

The Samson Q1 utilizes state-of-the-art microphone technology and is engi-

neered to the finest detail. Here are some of its main features:

•Tight cardioid polar pattern minimizes feedback problems and effectively

rejects signals not originating directly in front of the mic capsule.

•Full range frequency response for optimum reproduction and

exceptionally clear, crisp sound.

•Special shock-mounting allows multi axis movement of the mic element to

greatly reduce handling noise.

•Rugged zinc-casting and silicon anti-dent ring ensures reliable

performance in even the most demanding environments.

•Lightweight and compact, the Q1 can be mounted on any standard micro-

phone stand (using the included mic clip) or can be easily handheld for long

periods without inducing fatigue.

•Included foam-lined carrying case for convenience when

transporting the Q1 from venue to venue.

Printed May, 2000

Samson Technologies Corp.

575 Underhill Blvd.

P.O. Box 9031

Syosset, NY 11791-9031

Phone: 1-800-3-SAMSON (1-800-372-6766)

Fax: 516-364-3888

Microphone Placement andTone Quality

Listed are some common microphone placement techniques. Use these sugges-

tions as a guide and let your ears determine what works best in your situation.

•Sound source less than 6 inches away from mic—Full sound, pronounced

bass, increased isolation from background noise.

•Sound source 6 inches to 2 feet away from mic.—Balanced natural sound,

less bass, some background noise.

•Sound source 3 to 6 feet away. from mic—Thinner ambient sound.

Guidelines for Microphone Use

•Aim the microphone at the desired source. Keep unwanted sound sources at

a 135°angle from the front of the microphone (see polar pattern).

•Place the microphone as close to the sound source as possible.

•Use the proximity effect to your advantage.The closer the mic is to the

sound source, the more emphasized the bass response will be.

•Use a windscreen to suppress unwanted wind noise.

•Never cup your hand over the microphone grill.

Operating Notes

•The Q1 requires phantom power to operate.This is supplied to the micro-

phone via the XLR cable when connected to preamplifiers, mixers, or con-

soles with built-in phantom power.The Q1 will operate with phantom power

sources between 11 to 52 Vdc.

•The Q1 will boost bass frequencies when the microphone is between 0—6

inches from the sound source. As you move the sound source further away

from the microphone, the bass response will gradually roll off.

•The Q1 has a built-in wind screen which protects against most wind and

breathing noise. Under adverse conditions, such as high winds, an optional

foam windscreen can be used.

•For maximum signal handling capability and minimal distortion, a minimum

load impedance of 800 ohms should be used. A reduction in output signal

strength and output clipping level will result with the load at 150 ohms.

•Withstands high SPLs lending itself to a wide range of miking

situations

•Ultra sensitive element picks up all of the nuances of any performance

•Accepts a wide variety of phantom power source voltages from 11 to 52 Vdc

Every microphone has a characteristic polar pattern that determines how well it

accepts or rejects signal coming from various areas around the microphone. For

example, omnidirectional mics accept all signals regardless of wherever those

signals originate (in front of the mic, behind it, to the side, etc.). In contrast, direc-

tional cardioid mics are specifically designed to accept mostly signal coming from

directly in front, and to reject signal coming from behind or from the side.The

most extreme variation of cardioid is the cardioid pattern utilized by the Q1 (as

shown in the illustration on the following page); this yields maximum rejection of

signal coming from any direction other than directly in front of the mic. For this

The Q1 can be connected to any mixer, mixer/amplifier, or mic preamp supplying

phantom power, using a standard microphone cable. As shown in the wiring dia-

grams below, connect the female XLR end directly to the Q1’s gold-plated con-

nector and the other end (normally a male XLR end, although some mixers use

1/4" connectors) to the mixer, mixer/amplifier, or mic preamp.

Tip (hot)

Tip

Ring (cold)

Sleeve (ground)

Sleeve

Ring

XLR to XLR

cable

XLR to 1/4" TRS

cable (balanced)

XLR to 1/4" TS

cable (unbalanced)

The Q1 can be mounted to any standard microphone stand (using the included

mic clip) or can be handheld; due to its unique multi-axis mic element shock

mounting, it generates significantly less handling noise than most other micro-

phones. If handheld, take care not to cover the head grille with your hand. Be

aware of a phenomenon called the proximity effect which causes a noticeable

increase in low frequencies (bass response) when a microphone is close to the

audio source.This can have positive impact—for example, it will cause your voice

to sound much fuller when you sing close to the mic than when you sing at a dis-

tance.The Q1 is specially designed to be used up close, since it provides a built-

in windscreen (as shown in the illustration below) for removal of pops, sibilance

and onstage noise.The key to developing the best mic technique is experimenta-

tion, along with awareness of the general principle that, the closer your Q1 is to a

signal source, the greater the bass response.

Q1 Frequency Chart

Q1 Polar Pattern

Q1 Specifications

Type Condenser

Frequency Response 50 Hz - 20 kHz

Polar Pattern Cardioid

Output Impedance Rated at 150Ω(90Ωactual)

Maximum SPL 142 dB w/ 800Ωload, 134 dB w/ 150Ωload

Connector 3-pin gold plated balanced XLR male

Power Requirements

Supply Voltage (Phantom) 11 to 52 Vdc

Current Drain 1.0 to 1.2 mA

Dimensions

Head length 2. in. / 51 mm

Main unit length 5 in. / 127 mm

Total length 7 in. / 178 mm

Weight 8.4 oz. / 240 g

reason, the Q1 excels in environments where there is a good deal of unwanted

ambient sound—it delivers those signals originating directly in front of the mic

capsule itself while rejecting those that originate from behind.

The polar pattern also determines how prone a particular mic is to inducing feed-

back. Feedback is that characteristic nasty howling sound that occurs when a mic

is placed too close to a loudspeaker—the signal from the loudspeaker is fed into

the mic, then into the loudspeaker, then into the mic, over and over again until an

oscillating tone is generated. Because the cardioid pattern utilized by the Q1 is

so good at rejecting signal not coming from directly in front of the mic, you’ll find

that use of the Q1 greatly minimizes feedback problems.

Samson Technologies Corp. • 575 Underhill Blvd. • P.O. Box 9031 • Syosset, NY 11791-9031

Phone: 1-800-3-SAMSON (1-800-372-6766) • Fax: 516-364-3888

ser[email protected] • www.samsontech.com

Inhaltsverzeichnis

Andere Samson Mikrofon Handbücher

Samson

Samson M20114 Bedienungsanleitung

Samson

Samson CL7 Bedienungsanleitung

Samson

Samson R21 Bedienungsanleitung

Samson

Samson Go Mic Direct Bedienungsanleitung

Samson

Samson CL2 Bedienungsanleitung

Samson

Samson DE10 Bedienungsanleitung

Samson

Samson MTR231 Bedienungsanleitung

Samson

Samson SE60x Bedienungsanleitung

Samson

Samson QKICJ Bedienungsanleitung

Samson

Samson Q6 Bedienungsanleitung

Samson

Samson C05 Bedienungsanleitung

Samson

Samson SE50 Bedienungsanleitung

Samson

Samson C02 Bedienungsanleitung

Samson

Samson SATELLITE Bedienungsanleitung

Samson

Samson S12 Bedienungsanleitung

Samson

Samson Go Mic Bedienungsanleitung

Samson

Samson S-Monitor Bedienungsanleitung

Samson

Samson CM15P Bedienungsanleitung

Samson

Samson Go Mic Bedienungsanleitung

Samson

Samson LM10x Bedienungsanleitung

Samson

Samson LM10 Bedienungsanleitung

Samson

Samson 5Kit Bedienungsanleitung

Samson

Samson CM12C Montageanleitung

Samson

Samson UB1 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung