Samsung SIA-0010I Bedienungsanleitung

English _1

User Manual

IR Sensor

SIA-0010I/0010/0030/0060

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat reaisters, stoves, or other apparatus (including ampliﬁers)

that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong

are provided for your safety, If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

Only use attachments/ accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lighting storms or when unused for long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

10.

11.

12.

13.

14.

English _2

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR

OTHER OPENNINGS ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as

vases, shall be placed on the apparatus

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of “dangerous voltage” within the product’s enclosure that

may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the product.

Class construction

An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective

earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire

or the like.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your

location.

English _3

When used outside of the U.S., it may be used HAR code with fittings of an approved agency is

employed.

CAUTION

These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that contained in the

operating instructions unless you are qualified to do so.

Please read the following recommend safety precautions carefully.

Do not Place this apparatus on an uneven surface.

Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy

cold area.

Do not place this apparatus near.

Do not attempt to service this apparatus yourself.

Do not place a glass of water on the product.

Do not install near any magnetic sources.

Do not block any ventilation openings.

Do not place heavy items on the product.

User’s Manual is a guidance book how to use the products

The meaning of the using sign in the book is following

Reference: in case of providing information for helping of product’s usages

Notice: If there’s any possibility to occur any damages for the goods and human caused by not

following the instruction

ÚPlease read this manual for the safety before using of goods and keep it in the safe place.

English _4

IR Sensor at a Glance

Cover Receiver Transmitter Multipurpose Bracket

What’s Included

Injection bracket (x2) Injection Bracket Wing (x4) Screw (x4)

Steel Bracket x2 (optional) User Manual/Warranty Card U-shaped Bracket x2 (optional)

Power LED

Terminal

Good LED

Response Time

Control Wheel

Sight Window

Lens

Vertical Angle

Adjustable Screw

Alarm LED

Temper

Monitor Jack

English _5

Adjusting the response speed

You can adjust the response time by turning the response time control wheel left or right.

Turning it left will speed up the response time; turn it right to slow down the time.

The factory default is set to 250 msec.

Full-speed run – 50 msec

Fast walk – 100 msec

Normal walk – 250 msec

Slow walk – 350 msec

Jump over a fence or obstacle – 500 msec

Installation Instructions

For best performance, you should consider the followings when placing, installing and keeping the product at a distance from

the object.

Do not expose it to a place where its light projector or light receiver is affected by a direct strong light such as sunlight or

headlight. (below ±2 is not allowed in the optical axis)

Do not install it in an unstable, not properly secured place. (wire fence or unsecured pole is not allowed)

Do not install it in a place where the infrared light is blocked due to a seasonal reason such as thick wood or bushes.

Keep it away from the muddy water or sea water keeping splashing. (the infrared light is likely to be blocked by the muddy

water or sea water)

Installation

To mount on the wall

Loosen the screw to remove the cover of the sensor as shown.

Insert the bracket wing on the side as

shown.

If using more than 1 bracket

(max. height 15 cm)



•



50 msec 500 msec

English _6

Hook the upper hole of the sensor ﬁrst and ﬁt the lower hole into the

wall bracket in the arrow direction.

Remove the slot-shaped ﬁlling on the rubber hole of the sensor and

pull out the cables through the hole.

When done, adjust the optical axis and insert the cover.

To attach to the pole

Pull out the cables from the wiring hole of the pole; insert the

U-shaped pole bracket to the pole.

Attach the sensor to the bracket and arrange the cables as

necessary. (same as in wall-mounting)

Rubber Hole

Cable-In Hole

Pole bracket

(Optional)

Pole bracket (Optional)

English _7

Put the cover as original.

Adjusting the optical axis

Connect both transmitter and receiver and turn them on.

Look through the mirror of the sight and adjust the sensor so that the other

sensor can be positioned in the center of the mirror.

You can use the left/right adjustable screw and the vertical adjustable screw

of the reﬂector to reﬁne your adjustment. (vertically ±10˚ & horizontally ±90˚)

Check the level of the light received from the monitor output signal.

You can use the tester to measure the DC voltage and reﬁne your adjustment.

Check the output voltage of the tester and close the cover.

Output Voltage Optical Axis Status

3.0V or higher Good

2.9V or lower To be adjusted



±10˚

±90˚

English _8

Troubleshooting

Problem Reason Action

The power indicator of the

transmitter does not turn

on.

Power is not supplied.

Loose connection or short-circuited

Apply the power.

Check if the cables are properly connected.

Even if I block the infrared

light, the alarm indicator of

the receiver does not turn

on.

Power is not supplied.

Loose connection or short-circuited

The infrared light is incoming to the receiver

after reﬂected by an object.

Two light sources are not properly blocked

simultaneously.

Turn on the sensor.

Check if the cables are properly connected.

Remove the interruption object, or change

the installation site or the orientation of the

optical axis.

Block two light sources simultaneously.

The alarm indicator of the

receiver will not turn off.

The optical axis is dislocated.

There exists an obstacle between

transmitter and receiver.

The cover of the transmitter or receiver has

impurities on it.

Adjust the optical axis as necessary.

Remove the obstacle.

Wipe out the impurities with a soft cloth.

The alarm sounds

intermittently.

Disconnected cables

Fluctuation of the power voltage

There exists an obstacle between

transmitter and receiver.

There exists a different strong power source

around the transmitter or receiver.

The transmitter or receiver gets loose and

unstable at its position.

The optical axis is dislocated.

The cover of the transmitter or receiver has

impurities on it.

Sometimes a big bird or cat can block the

light temporarily.

Check the connection status again.

Regulate the power voltage.

Remove the obstacle.

Change the wiring path.

Secure the pole or support.

Adjust the optical axis as necessary again.

Wipe out the impurities with a soft cloth.

Set the response time longer.

Wiring Diagram

Receiver Transmitter

1. VCC : DC12V

2. GND

3. Normal Close

4. Common

5. Normal Open

6. Tamper

7. Tamper

1. VCC : DC12V

2. GND

English _9

Speciﬁcations & Appearance

Speciﬁcations

Item Description

Model SIA-0010I SIA-0010 SIA-0030 SIA-0060

Work Range Outdoor 10m Outdoor 10m Outdoor 30m Outdoor 60m

Detection System NIR Blocking System (Twin Beams)

IR Light IR LED

Response Time 50 ~ 500 ms

Power Voltage DC 12V(±15%)

AGC Voltage Alarm: 2.0V or less, Ready: 2.1~2.9V, Good: 3.0V or higher

Current Consumption Receiver: 19mA, Transmitter: 22mA (max)

Alarm Out Dry contact relay output 1C (COM, N.C/N.O)

Reset: Interruption time + off-relay (approx. 1 sec)

Temperature -25˚C ~ 60˚C

Temper Output Dry contact, Micro SW (COM, N.C)

Adjustment of Optical Axis Horizontal: 180˚(±90˚), vertical: 20˚(±10˚)

Bracket Type Default: Wall-mount bracket, Optional: Pole-mount bracket

Weight 454g 470g

Dustproof/Waterproof Rating IP 65

Appearance

Unit: mm

P/No. : Z6806119001A-00

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories

(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of

their working life. To prevent possible harm to the environment or human health from uncontrolled waste

disposal, please separate these items from other types of waste and recycle them responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local

government ofﬁce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Zubehör Handbücher

Samsung

Samsung F-SS-PRES-001 Bedienungsanleitung

Samsung

Samsung SmartThings GP-U999SJVLCAA Bedienungsanleitung

Samsung

Samsung SIP-1212W Bedienungsanleitung

Samsung

Samsung Slim Duct-CNH LDB Gebrauchsanweisung

Samsung

Samsung RFD01F series Bedienungsanleitung

Samsung

Samsung EAD-P010 Bedienungsanleitung

Samsung

Samsung XE800ZAA Bedienungsanleitung

Samsung

Samsung S Pen Pro Bedienungsanleitung

Samsung

Samsung SCW-K240 Bedienungsanleitung

Samsung

Samsung RT4401-48A Bedienungsanleitung

Samsung

Samsung SCL Series Bedienungsanleitung

Samsung

Samsung SmartThings Hub Bedienungsanleitung

Samsung

Samsung ProXpress C306x series Bedienungsanleitung

Samsung

Samsung SIP-1201DD Bedienungsanleitung

Samsung

Samsung HM5100 Bedienungsanleitung

Samsung

Samsung TS48W Series Bedienungsanleitung

Samsung

Samsung SmartThings STS-PRS-250 Bedienungsanleitung

Samsung

Samsung SmartThings Series Bedienungsanleitung

Samsung

Samsung SIA-0100Q Bedienungsanleitung

Samsung

Samsung SIA-0100Q Bedienungsanleitung

Samsung

Samsung MCR-SMD Bedienungsanleitung

Samsung

Samsung S Pen Pro Bedienungsanleitung

Samsung

Samsung EJ-FT810 Bedienungsanleitung

Samsung

Samsung HM5100 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung