Samsung SIP-1201DD Bedienungsanleitung

English _1

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat reaisters,

stoves, or other apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type

plug, A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety, If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of

the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

Only use attachments/ accessories speciﬁed by the manufacturer.

10.

11.

User Manual

Directional Passive-Infrared Sensor

SIP-1201DD

English _2

Use only with the cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used. Use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lighting storms or when

unused for long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE.

DO NOT INSERT ANY METALLIC OBJECT THROUGH THE

VENTILATION GRILLS OR OTHER OPENNINGS ON THE

EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that

no objects filled with liquids, such as vases, shall be placed on

the apparatus

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

12.

13.

14.

English _3

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

Class construction

An apparatus with CLASS construction shall be connected to a

MAINS socket outlet with a protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed

to excessive heat such as sunshine, fire or the like.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected.

And please call a repair man in your location.

When used outside of the U.S., it may be used HAR code

with fittings of an approved agency is employed.

CAUTION

These servicing instructions are for use by qualified service

personnel only.

To reduce the risk of electric shock do not perform any servicing

other than that contained in the operating instructions unless

you are qualified to do so.

English _4

Please read the following recommend safety precautions

carefully.

Do not Place this apparatus on an uneven surface.

Do not install on a surface where it is exposed to direct

sunlight, near heating equipment or heavy cold area.

Do not place this apparatus near.

Do not attempt to service this apparatus yourself.

Do not place a glass of water on the product.

Do not install near any magnetic sources.

Do not block any ventilation openings.

Do not place heavy items on the product.

User’s Manual is a guidance book how to use the products

The meaning of the using sign in the book is following

Reference: in case of providing information for helping of

product’s usages

Notice: If there’s any possibility to occur any damages for the

goods and human caused by not following the instruction

ÚPlease read this manual for the safety before using of goods

and keep it in the safe place.

English _5

IR Sensor at a Glance

What’s Included

Screw (x2) User Manual/

Warranty Card

Sensor Housing

LENS

Alarm LED

Spare LED

Internal Status LED

Direction Switch

Tamper Switch

Alarm LED

DIP Switch

Terminal

LED Select Switch

Wiring Hole

OUTPUT Select Switch

Body

Cover

Rear Front

Display the scanning direction

English _6

Installation

Ceiling Mount

Turn the cover left to loosen it from

the body.

Turn the screws (4x25) clockwise to

secure the body to the ceiling and

do the wiring as necessary.

Adjust the lens in full detail to set the

boundary scanning range.

Turn the cover right to close it.

For an ordinary concrete wall, use the

6mm concrete drill to make a hole and

insert the anchor.

•

English _7

Setting the direction switch

If intrusion is made in the arrow direction, set the pin to the left or right

accordingly.

For an apartment building, intrusion is made

from the porch to the living room.

If you turn off the switch #3, the directional

detection will be disabled.

Adjusting the DIP switch

The following is the factory default.

No. 1 2 3 4

Status Timer Setting

(for directional detection) Directional Detection Test

ON ON ON = 4 min

ON OFF = 2 min

OFF ON = 1 min

OFF OFF = 5 sec

Active Testing

OFF Inactive Normal operation



Testing

ON : Directional detection, OFF : Normal passive-infrared sensor (duplex

area scanning)

Time setting for directional detection (5 sec, 1, 2, 4 min)

English _8

Setting the output contact point with the

terminals

Setting OUTPUT LED

Factory Default

Scanning:

Connected

Alarming:

Disconnected

Scanning:

Turns off

Alarming:

Turns on

Scanning:

Disconnected

Alarming:

Connected

Scanning:

Turns off

Alarming:

Turns off

Terminal Description Comment

VCC +12V Nonpolar

GND 0V

COM COMMON Output jumper pin setting

OUT N.C/N.O

TAM1 Tamper

TAM2 Tamper

Checking the boundary scanning range

Terminal Layout

Installation Height 2.6m

Side view

Top view

Inside

(Outside)

Zone

Inside

(Outside)

Zone

English _9

Speciﬁcations & Appearance

Speciﬁcations

Item Description

Scanning Type Directional Detection & Duplex Area Scanning

Scanning Range 12m

Voltage and Current

Consumption DC 12V (±15%) / 19mA

Number of Sensing

Zones 16 zones

Height 1.8m ~ 3.0m (basis of 2.6m)

Sensing Speed Min. 0.2m/s, Max. 1.5m/s

Alarm Output Point of

Contact Capacity 1 A (DC 30V) Operating Time: Less than 2 seconds

LED Status

(turns off after it turned

on)

Category Directional Detection

Normal operation / Test

Duplex Area

Scanning

Green Internal operation / Detecting

movement in the left zone -

Red Alarm operation / Detecting

movement in the right zone Alarming

Temperature -10˚C ~ 50˚C (Humidity 95%)

Dimension π132 X Height 52mm

Weight 100g

Appearance Unit: mm

P/No. : Z6806120801A-00

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection

systems)

This marking on the product, accessories or literature indicates that the product and its electronic

accessories (e.g. charger, headset, USB cable) should not be disposed of with other household

waste at the end of their working life. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or

their local government office, for details of where and how they can take these items for

environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product and its electronic accessories should not be mixed with other commercial

wastes for disposal.

Inhaltsverzeichnis

Andere Samsung Zubehör Handbücher

Samsung

Samsung SmartThings GP-U999SJVLCAA Bedienungsanleitung

Samsung

Samsung SmartThings STS-PRS-250 Bedienungsanleitung

Samsung

Samsung EJ-FT810 Bedienungsanleitung

Samsung

Samsung SmartThings Series Bedienungsanleitung

Samsung

Samsung RFD01F series Bedienungsanleitung

Samsung

Samsung HM5100 Bedienungsanleitung

Samsung

Samsung F-SS-PRES-001 Bedienungsanleitung

Samsung

Samsung S Pen Pro Bedienungsanleitung

Samsung

Samsung SCW-K240 Bedienungsanleitung

Samsung

Samsung Slim Duct-CNH LDB Gebrauchsanweisung

Samsung

Samsung SmartThings Hub Bedienungsanleitung

Samsung

Samsung SCL Series Bedienungsanleitung

Samsung

Samsung SIA-0100Q Bedienungsanleitung

Samsung

Samsung SIA-0100Q Bedienungsanleitung

Samsung

Samsung EB-U1200 Bedienungsanleitung

Samsung

Samsung TS48W Series Bedienungsanleitung

Samsung

Samsung SIP-1212W Bedienungsanleitung

Samsung

Samsung SmartThings GP-U999SJVLCAA Bedienungsanleitung

Samsung

Samsung XE800ZAA Bedienungsanleitung

Samsung

Samsung HM5100 Bedienungsanleitung

Samsung

Samsung SIS-0001 Bedienungsanleitung

Samsung

Samsung MCR-SMD Bedienungsanleitung

Samsung

Samsung S Pen Pro Bedienungsanleitung

Samsung

Samsung EAD-P010 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung