Samsung SHR-2042 Bedienungsanleitung
Real Time DVR
SHR-2040/2041/2042 User’s Manual
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page i
SHR-2040/2041/2042 USER’S MANUAL
ii
Please be sure to keep the following in mind for the right use of the product to
pre-vent proprietary risk or damage.
■Do not use multiple plugs at once.
●This may cause abnormal heat generation or fire
■Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel
with water around you.
●This may cause fire.
■Do not bend the power cord forcibly nor put a heavy material on it.
●This may cause fire.
■Do not touch the power plug with wet hands.
●This may cause electric shock.
■Insert the power plug firmly enough not to shake.
●This imperfect connection may cause fire.
■Keep the product off humidity, dust, or soot.
●This may cause fire or electric shock.
■Do not put metals(coin, hair pin, metal piece, etc.) or inflammable
materials(match, paper, etc.) in the ventilation hole.
●This may cause fire.
■Keep the surrounding temperature between 0˚C to 40˚C and keep the
product off humidity.
●This may cause breakdown.
■Secure sufficient ventilation.
●This may cause abnormal operation due to high temperature.
■Keep the product off direct ray of light or heat from the heating
device
●This may cause fire.
■Do not disassemble, repair, or remodel the product.
●This may cause fire, electric shock, or injury due to abnormal operation.
■Do not pull out the power cord.
●This may destroy the power cord, eventually, cause fire or
electric shock.
■Plug out in the event of thunder or lightning.
●This may cause fire.
■Keep your children off the battery after you take it out of the product.
They tend to swallow it unconsciously.
●If your children swallow it, please see the doctor immediately.
■Install the product at a safe place or attach the product to the wall or
ceiling with a stand firmly enough not to fall to the ground.
●This may injure people.
Safety Regulations
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page ii
iii
WARNING
[Battery]
As wrong exchange of the battery in SHR-2040/2041/2042 may cause explosion, you
shall use the certified battery for SHR-2040/2041/2042.
The battery specification is as follows.
-Normal Voltage: 3V
-Normal Capacity: 220mAh
-Continuous Standard Load: 0.2mA
-Operating Temperature: -30 ~ +60˚C
[System Shutdown]
- Power-off without terminating the system in the System Shutdown menu may incur
improper motion like data loss and disk failure. Power-off shall be done in the
System Shutdown menu.
This User’s Manual describes the basic usage of SHR-2040/2041/2042. This Manual
contains all the matters necessary for using SHR-2040/2041/2042 such as brief
instruction, part name, function, connecting other equipment, and menu setup of
SHR-2040/2041/2042.
- SEC retains the copyright on this User’s Manual.
- This User’s Manual cannot be copied without SEC’s prior written approval.
- We are not liable for any or all losses to the product incurred by your use of non-
standard product or violation of User’s Manual.
- If you want to open the system case to touch the inside, please consult with an
expert who works for the shop where you bought the product.
- You may download open source codes from the following website.
(See CCTV Part of http://www.sec.co.kr)
Before we start
Standards Approvals
Note :
This equipment has been tested and found to comply with the limits for a Class
Adigital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance whit the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page iii
iv
Safety Regulations
Before we start
Standards Approvals
Chapter 1 Overview
1. Introduction
2. Features
3. Part Names and Functions
Chapter 2 Installation
1. Installation Environment Setup
2. Checking Product & Accessory
3. HDD Addition
Chapter 3 Connecting with Other device
1. Connecting Video, Audio, & Monitor
2. Connecting the Network
3. Connecting the USB
4. Connecting the Alarm Input/Output
5. Connecting the RS-485 Device
Chapter 4 Live
1. System Operation
2. Live Screen Mode
3. Live Channel Selection and Audio On/Off Setup
4. Freeze and Zoom
5. Event Monitoring
6. Spot-out Monitoring
Contents
1
iii
ii
1-1
1-2
1-3
2
2-1
2-2
2-3
3
3-1
3-3
3-5
3-6
3-8
4
4-1
4-2
4-5
4-6
4-7
4-8
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page iv
v
Chapter 5 Menu Setup
Before Use
1. System
2. Camera
3. Monitoring
4. Recording Mode
5. Event Record Mode
6. Record Schedule
7. Backup
8. Network
9. Network Setup
Chapter 6 PTZ Camera Control
1. PTZ camera Control Mode
2. Basic Operation of PAN, TILT, & ZOOM
3. Preset Setup
4. Camera Menu Setup
5. Preset View
6. Other View
Chapter 7 Recording
1. REC (Normal Recording)
2. Schedule Recording
3. Event Recording
Chapter 8 Search and Play
Before Use
1. Calendar Search
2. Event Search
3. Date/Time Search
4. Go to First Search
5. Go to Last Search
6. Backup
7. Playback
5
6
7
8
5-1
5-2
5-12
5-16
5-18
5-20
5-25
5-27
5-28
5-32
6-1
6-3
6-4
6-6
6-7
6-8
7-1
7-2
7-3
8-1
8-2
8-3
8-4
8-5
8-6
8-7
8-8
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page v
vi
Chapter 9 Smart Viewer
1. Introduction
2. Feature
3. PC Specification(Recommendation)
4. Smart Viewer Installation
5. Smart Viewer Program Execution
6. Smart Viewer Initial Screen
7. Monitoring Mode
8. Search Mode
9. Setup Mode
Appendix
1. Product Specification
2. The specification of HDD and peripheral device
3. Outline Drawings
4. Factory Default
5. Smart Viewer Frame Specification for the Playback
6. Troubleshooting(FAQ)
9
10
9-1
9-2
9-3
9-4
9-7
9-8
9-9
9-23
9-30
10-1
10-4
10-5
10-7
10-9
10-11
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page vi
Chapter 1 Overview
1
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1
1
Introduction
1-1
The Digital Video Recorder(DVR) compresses the 4 channel of camera input data into the
MPEG4 video file and the 4 channel of voice input data into the ADPCM audio file in the real
time to record them in the Hard Disk or retrieve them from the Hard Disk simultaneously.
In addition, it transfers the Video/Audio out through a network in the real time and it is able to
monitor the Video/Audio remotely by your PC.
SHR-2040/2041/2042 USER’S MANUAL
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-1
2
Features
1-2
■4 CH Composite Input Connectors
■NTSC / PAL Video Source Compatible
( NTSC : SHR-2040/SHR-2041/SHR2042, SHR-2040N / SHR-2041N / SHR-2042N
PAL:SHR-2040P/SHR-2041P/SHR2042P)
■Able to record the CIF sized (NTSC-352 x 240/PAL-352 x 288) video at the speed of
120 ips(NTSC)/100ips(PAL)(Image Per Second)
■4 CH Loop Through Video Connectors
■Hard Disk Overwrite Mode
■Large Quantity Hard Disk Backup by USB2.0
■Backup function by the USB2.0 memory and exterior CD/DVD writer(SHR-2042 supports
the internal CD-RW.)
■Able to record, play, and transmit both audio and video files to Windows Network
Viewer(Smart Viewer) simultaneously
■Able to record and play the audio 4CH
■Variable Search Mode (Time/Date, Event, Camera)
■Variable Recording Mode (Time Lapse, Event, Schedule)
■Extended Hard Disk Connection (USB2.0)
■Alarm Interface function (Input : 4, Output:2, Reset:1)
■Remote Monitoring function by Windows Network Viewer(Smart Viewer)
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-2
No. Name Function
SHR-2040/2041/2042 USER’S MANUAL
3
Part Names and Functions
1-3
Power LED
HDD Access
LED Displays Normal Access to HDD. Upon Access to HDD, LED
repeats on and off.
Mode Selection
Button Search
Audio Setup
Button
Displays power on/off condition.
1
2
3
5
Network LED
Displays both network connection and data transmission conditions.
Backup LED Displays Back Up Mode.
Alarm LED lights on when an event occurs.
Rec LED Displays the record condition.
...
1 4
AUDIO
MODE
6MODE
Sets the Audio On/Off.
Audio Setup
Button
4ALARM
Cancels the alarm when the Alarm button is selected.
The single channel screen is changed
according to the time set on the menu.
Displays 4 split screen.
Displays PIP(Picture in Picture) screen.
Displays 4 split screen.
Displays 9 split screen.
(4 CH playback screen and 4 CH live screen)
Channel Button Selects a channel in the Single Mode. Used for number
input button in the number input mode.
Split Screen
Selection Button Display
Mode
Displays both LIVE Channel and Playback
Channel in the PIP Screen simultaneously.
Displays 6 split screen.
(1 CH playback screen and 4 CH live screen)
[SHR-2040]
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-3
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Samsung DVR Handbücher
Samsung
Samsung SHR-1041K Bedienungsanleitung
Samsung
Samsung SVR-1650 Bedienungsanleitung
Samsung
Samsung SVR-3200 Bedienungsanleitung
Samsung
Samsung SRN-1000 Bedienungsanleitung
Samsung
Samsung SMT-H4372 Bedienungsanleitung
Samsung
Samsung SRD-1650DC Bedienungsanleitung
Samsung
Samsung SRD-830 Bedienungsanleitung
Samsung
Samsung SHR-2160 Bedienungsanleitung
Samsung
Samsung SVR-1630 Bedienungsanleitung
Samsung
Samsung DIRECTV AH68-01335A Bedienungsanleitung
Samsung
Samsung SRD-1630 Bedienungsanleitung
Samsung
Samsung SRD-850DC Bedienungsanleitung
Samsung
Samsung STB-E7500 Bedienungsanleitung
Samsung
Samsung SMT-S7800 Bedienungsanleitung
Samsung
Samsung SRD-880D Installationsanleitung
Samsung
Samsung SRD-470 Bedienungsanleitung
Samsung
Samsung SIR-S4120R Bedienungsanleitung
Samsung
Samsung SVR-3200 Bedienungsanleitung
Samsung
Samsung SP-D400 Bedienungsanleitung
Samsung
Samsung SDE-500X Bedienungsanleitung
