Samsung SHR-2XXX Benutzerhandbuch

Dieses Handbuch passt für folgende Modelle

3

Andere Samsung DVR Handbücher

Samsung

Samsung SNR-1162 Bedienungsanleitung

Samsung

Samsung SVR-440 Bedienungsanleitung

Samsung

Samsung SRD-870D Bedienungsanleitung

Samsung

Samsung SDE-500X Bedienungsanleitung

Samsung

Samsung SRD-470 Bedienungsanleitung

Samsung

Samsung SHR-5040 Bedienungsanleitung

Samsung

Samsung SIR-S4120R Bedienungsanleitung

Samsung

Samsung SRD-873D Bedienungsanleitung

Samsung

Samsung SHR-5040 Bedienungsanleitung

Samsung

Samsung SRD-470D Bedienungsanleitung

Samsung

Samsung SHR-3010P Bedienungsanleitung

Samsung

Samsung SVR-3200 Bedienungsanleitung

Samsung

Samsung SRN-1000 Bedienungsanleitung

Samsung

Samsung SVR-1630 Bedienungsanleitung

Samsung

Samsung SHR-4081N/P Bedienungsanleitung

Samsung

Samsung SDE-120N Bedienungsanleitung

Samsung

Samsung SMT-190Dx Bedienungsanleitung

Samsung

Samsung RD-840/1640 Bedienungsanleitung

Samsung

Samsung SHR-1010 Bedienungsanleitung

Samsung

Samsung SHR5160500 - Electronics Gvi - Dvr 16ch Mpeg4 120ips Real... Bedienungsanleitung

Samsung

Samsung SRD-830 Bedienungsanleitung

Samsung

Samsung SRD-470D Bedienungsanleitung

Samsung

Samsung SDH-C75080 Bedienungsanleitung

Samsung

Samsung SRD-1654D Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

DIGIFUSION

DIGIFUSION FVRT150 Bedienungsanleitung

1

Using TZO.COM™Dynamic DNS and a D-Link™804-HV

router for Remote Viewing with your Samsung™SHR-

2XXX and SHR-4XXX Series DVR

This document explains how to best setup a Samsung™SHR series DVR using a Dynamic or

Static IP connection and TZO.COM™Dynamic DNS. This setup is based on a D-Link™4 port

wired router model 804-HV. In this document, you will learn how to:

·Login and setup the D-Link™804-HV Router with the TZO Dynamic DNS service

·Configure the D-Link™router to add services and open the ports needed for remote viewing and

administration of your Samsung™DVR (TCP Port 554-557 and UDP 8000-8159)

·Configure the IP address, gateway and DNS of the DVR so it works with the D-Link™router.

·Connect to your Samsung™DVR from any Windows based PC on the same network

·Connect to your Samsung™DVR from any REMOTE PC over the Internet using Smartviewer

software

·Troubleshooting your DVR if you are having trouble connecting

Please Note: The product names used in this document are for identification purposes only. All trademarks and registered

trademarks are the property of their respective owners.

BEFORE YOU BEGIN

SETUP THE ROUTER AND DVR ACCORDING TO THE MANUAL

-----------------------------------------------------------------------

Initial D-Link™router setup:

You should SETUP THE D-LINK™ROUTER for your Internet Connection according to the ISP and D-Link™

Manual. Make sure you can browse the Internet and use the Internet normally before you continue.

* If you use PPPoE DSL, make sure you set the CONNECT MODE to ALWAYS-ON under the WAN Settings

during configuration of the D-Link™Router.

Initial DVR Recording and Camera setup:

You should now setup the DVR for your preferences using the Manual/Guide that came with your DVR.

You do not need to setup the IP address on the DVR at this point, we cover that below to ensure the IP

is in the desired format for this document. If the DVR is already setup, continue below for details on

setting the IP address properly on the DVR.

2

Setting up the TZO Dynamic DNS

------------------------------------------------------------------------------------------

SIGNING UP AND ENABLING THE D-LINK™ROUTER WITH TZO DYNAMIC

DNS:

A) Make sure you are signed up with a trial account, or have paid for a TZO subscription (Standard or

Premier service) **If you do not have a TZO Key and Domain Name selected, sign up for a free 30 day

trial domain at http://YourDVR.tzo.com as shown below.

B) Enter your choice for a domain name (each location/DVR must be unique) and enter the email

address you wish to use. Click the CREATE MY FREE TRIAL DOMAIN NAME button and TZO will send

your TZO Domain Name and TZO key to the email address you used.

C) Once you have the TZO Key, Domain name and Email address used written down or available from

your email, log into your router by going to http://192.168.1.1 and using your username and password to

log into the router. (default username is admin and password is blank)

3

D) Once you are logged into the router, click the ADVANCED tab at the top. Under the ADVANCED

section, select DDNS from the left hand menu (blue buttons). As shown in the screenshot below, enable

the TZO Dynamic DNS service, and then input the Domain Name, TZO Key/Password and Email

Address/Username into the router DDNS setup. Click Apply. You now have setup the TZO DDNS

properly.

This domain name is good for 30 days for testing. After 30 days the TZO Dynamic DNS will expire. You

can purchase the TZO standard Dynamic DNS service for this domain name at

http://www.tzo.com/order.html before it expires. When ordering, use the email address you used when

signing up.

D-LINK™PORT FORWARDING AND OTHER ROUTER CONFIGURATION:

-----------------------------------------------------------------------------------------

*IMPORTANT NOTE before you start on PORT FORWARDING and Port Blocking:

* If DSL is being used for a broadband connection to your DVR, check with your ISP to make sure that

your DSL modem is in "bridge mode" to assure that there is no NAT server running on the DSL modem

itself. If this is the case, you will have extreme difficulty in port forwarding and getting the DVR to work.

You can call your ISP and ask if your DSL modem can be configured for Bridge mode and allow your

router to authenticate with the DSL signon routine instead of the DSL Modem.

Step 1) The first step is to log in to the router. Log into the router by going to http://192.168.1.1 and

using your username and password to log into the router. (default username and pw is admin/blank)

Step 2) Once you log into the router, Click the ADVANCED TAB in the top menu.

We need to add 2 sets of ports (TCP Port 554-557 and UDP 8000-8159) to the Virtual server section in

order to view the DVR remotely. These ports are added to the server list in 2 separate processes as

described below.

4

Step 3) In the list of Virtual Servers, we will add ports 554-557 first, then ports 8000-8159 in a second

process. In order to add a new service for ports 554-557, fill in the blanks as shown in the screenshot

below and then click the APPLY button.

Select Enabled

Name: DVR

Private IP: 200

Protocol: Both

Private Port: 554

Public Port: 557

Schedule: Always

This will add in the ports 554-557 as a service in the Virtual Server list. Repeat this for the additional

ports as shown in the steps below.

5

Step 4) In order to add a new service for ports 8000-8159, fill in the blanks as shown in the screenshot

below and then click the APPLY button.

Select Enabled

Name: DVR2

Private IP: 200

Protocol: Both

Private Port: 8000-8159

Public Port: 8000-8159

Schedule: Always

This will add in the service for ports 8000-8159 in the Virtual Server list.

6

Step 5) Check that your VIRTUAL SERVER LIST looks similar to the screenshot shown below.Your

VIRTUAL SERVER list will have many more services shown, but you should make sure that the DVR and

DVR2 services are listed as shown below, and that the ports and IP’s match exactly as shown in the

screenshot or the DVR remote viewing may not work. If it looks similar, you have completed the port

forwarding step and can now logout of the D-Link™(closing your browser)

Step 7) (Optional) –Enabling Remote Administration in the router can be a smart idea if you want to

remotely administer the router to open ports, change port forwarding, configure the TZO Dynamic DNS

and more. If you do not enable remote administration, you will have to login to the router locally.

*IMPORTANT: If you enable remote management, be sure to set a different password other than the

default password used in this document. You can also change the remote management port to a custom

port you select. Avoid ports 554-557 and 8000-8159, since these are used by the DVR.

Under the TOOLS TAB, scroll down to REMOTE MANAGEMENT and then setup the REMOTE

MANAGEMENT features as shown in the screenshot below. Using the D-Link™router, you can only set a

specific IP address to control from, so there is some limitation in this router for remote management.

7

CONNECTING THE DVR TO THE ROUTER AND ASSIGNING THE IP ADDRESS

-----------------------------------------------------------------------------------------

The first step in the whole process is to setup the DVR and the cameras. Consult your DVR manual for

setup details as explained at the beginning of this document.

Once the DVR is powered up and the cameras are setup, you should then connect the DVR to the router

using a standard RJ-45 ETHERNET cable. Once you connect the DVR to the router, you need to enter

the menu of the DVR by following the exact steps below:

1) On the Samsung™DVR’s, you push the MENU button –located on the upper right side of the DVR

front panel.

2) After you push the MENU button, the password menu screen comes up as shown below. Enter the

password (default is 4321) and press the ENTER key (round button in the middle of the cursor buttons)

8

3) You will now see a screen similar to the one shown below –this is the Menu Setup screen.

Use the cursor buttons to scroll down to the NETWORK setup. Once you select the NETWORK menu,

press the RIGHT cursor button

4) You should use the cursor buttons to scroll over to IP SETTINGS and then press the ENTER button

9

5) Now that you are in the IP SETTINGS setup menu as shown below, we need to edit the network

settings to match your router. Use the cursor buttons and enter button to scroll down, select and change

the IP address, and then adjust the gateway and DNS. Ding this will make sure your DVR’s Network and

IP settings are setup to work with your router. The important settings are listed below:

IP ADDRESS: 192.168.1.200

Subnet: 255.255.255.0

Gateway: 192.168.1.1

DNS: 192.168.1.1

6) Once you have set the DVR to the IP settings above, you need to scroll down to the OK button and

press the ENTER button. One you are back in the MENU SETUP (the main setup menu) you can press

the MENU button to exit the setup.

10

CONNECTING TO YOUR SAMSUNG™DVR AND VIEWING LIVE AND

RECORDED VIDEO - (INTERNAL VIEWING ON THE SAME NETWORK)

------------------------------------------------------------------------------------------

Before you attempt to test the configuration from a remote location, you should perform some tests

internally (on the same network where the DVR is located) and attempt to connect to the DVR using the

Samsung™SMARTVIEWER software.

USING SMARTVIEWER REMOTE SOFTWARE TO CONNECT:

---------------------------------------------------------------------------

Using the SMARTVIEWER software that came with your DVR, you can connect to the DVR by going to the

INTERNAL IP address of the DVR.

Follow the steps below to connect with the SMARTVIEWER software:

Step 1) Run the SMARTVIEWER software. The first step is to add the internal remote site for viewing

the DVR. Once the SMARTVIEWER software opens, click in the lower right corner as shown in the

screenshot shown below (circled in red). Doing this will enter the SETUP where you need to add the

INTERNAL site.

*IMPORTANT! - DO NOT USE the TZO Domain name when connecting internally, in most cases the

domain name WILL NOT WORK from the internal network. Once you have tested the INTERNAL IP with

success, you can then try the domain name from a remote location.