Samsung WMN-M20E Bedienungsanleitung

SI\MSUNG

Cautions

when

installing

Model name WMN-M20E

· ,

·.·.

...

Width (mm)

520

Height (mm)

277

Thickness (mm)

15.6

tilt

(

Max.

5°

(other

tilt

angles

are

not allowed)

Package

size

x Dx

(mm)

594

378

Package

weight (kg) 4.0±0.5

Max.

allowable

weight (kg)

Standard stud distance

supported

not supported

Compatible

TVs

SAMSUNG

Series}

or more)

SAMSUNG

Series}

or more)

Clearance from the wall (mm)

SAMSUNG

Series}

or more)

*You cannot install the

at a random angle.

The

tilt

angle

can

expanded

to 5degrees.

•

sure

use

the

components and parts provided

for

installing

the

wall

mount.

• The manual instructions and provided parts are based

the typical walls (made

wood orconcrete). (In

case

the

WMN-M20E(A) model,

the

drywall

mounting parts are additionally provided.)

•

case

the

other

cases,

use

separate mounting parts or perform

wall

reinforcement in advance. If required,

install

the

wall

mount

with

aid

expert.

•

cautious notto damage the

screen while installing the

wall

mount.

• Check your

TV's

model series. Then

use

the

appropriate preparation methods

for

the

support frames using the

appropriate screws.

• Ifyou do

not

the installation instructions suitable

for

your

model,

the

wall

mount

and

connection

may

unstable.

. D

I I

<Q7

/Q8

Series>

<Q9

Series>

-English

-1-

-2-

• When installing or uninstalling

the

wall

mount

support frame, make sure 2 people

work

it, and the

off.

•

Use

flat

table when installing

the

wall mount.

Use

the

packing material (cushion)

for

curved

TVs.

Flat

Curved

• Install the

wall

mount only

the

wall

that

largerthan the

and

not

tilted.

After

installation,

the

cover or

attachment at

the

bottom

the

musttouch

the

wall. Otherwise,

the

wall

mount must

not

installed.

Wall

that

largerthan

(lnstallable)

Tilted

wall

(Not

installable)

Wall

that

not

larger than the

wall

mount

(Not

installable)

• Before mounting the

awall, connect

the

powercable and

One

Connect cable

the

TV.

• When installing I uninstalling

the

wall

mount,

careful not to damage

the

optical cable. Especially,

careful

not to step

the

optical cable.

•

Use

a screwdriverto assemble

the

supportframe. Using

electric screwdrivermay cause screw

threads to wear out.

•

The

minimum distance between the

and

wall

may

2-3 mm or more depending

the

wall

surface or

installation conditions.

(Q~

Series:

least 0

mm,

Series: at least 6 mm)

•

The

distance between the

wall

and

the

left

right

side of the

may

differ

depending

the

wall

and

installation conditions.

• When installing the wall mount,

the

too close

awall, scratches may occur

the

back

the

wall.

• A

lot

force

required

open the bracket before installing the wall mount.

careful not

hurt

yourself

when opening

the

bracket. (Brackets

with

tilt

options are

difficult

to open because they need to withstand

the

weight

the

TV.)

-English 3 -

•

cases

with

tight

installation conditions} friction between the TV/accessories and the wall may damage

the

wall

the

back

the

TV.

Use

a scratch

protector8

the picture

such

cases.

However} distance from the wall

may increase.

\_;___J

•

You

must

use

8 parts

the picture

attach

series

TVs.

This restricts movement between the

and wall

due

distance from the wall and prevents the

from leaning forward.

the

leans forward}

use

overlapping 8 parts. This may additionally improve the inclination. However}

distance from the wall may increase.

• A curved

may move

left

and

right

after

being installed

the wall mount.

You

can

suppress the

from moving

left

and

right

using

accessories·-·

together. (Adjust the horizontal length of the part

the same.)

You

can

also suppress a Flat

from moving

left

and

right

using accessories

e-e.

However} distance from

the

wall may increase.

'¥

o---e

e;e

'~----------------,

Flat

-English

e;e

--------------------

Curved

-3-

-4-

• Ifthere

a protruding part

the wall where

you

want

install the wall mount, you may

use

accessories

8-8

secure enough distance between the

and awall. (Adjust the horizontal length of

the

partto

the same.)

However, the distance to the wall

will

become larger.

t e

e;e

• If

you

secure distances using those accessories,

you

may not

able

use

the

tilt

option. If

you

want

use

the

tilt

option, the secured distance

limited.

•

The

maximum

tilt

angle differs depending

the

model.

The

tilt

angle may

not

maintained

the wall with

vibration.

•

You

cannot choose the

tilting

angle.

(You

can

only install at the maximum

tilting

angle.)

You

must

use

the

accessory.

to maintain the

tilt.

If you

not

use

the accessory

may cause the

TV's

tilting

angle to

sag.

• When fixing the

tilt

angle

with

the(.)

part, do not stick the

to the wall.

may cause damage to the fixture.

-English

•

After

wall

mount installation, movement may occur

some

models depending

the

rearshape

the

TV.

this

case,

use

the separation holder

(G).

Triangularsupport allows more stable

wall

mount

installation. However, distance from

the

wall

may increase.

• If you cannot adjust the horizontal level by using

the

horizontal adjustmentfunction, check

the installation was

done properly.

you cannot

use

the

horizontal adjustmentfunction, the fixers

the

wall

mount's support frame are not

properlyfixed. Make sure

install

them

properly.

• The horizontal level

that

can

adjusted

just

2 degrees.

adjust

the

horizontal level at more angles than

this

range, reinstall the

wall

mount.

t t

•

the

wall

mount's fixers are notfixed

the

end

shown in

the

figure, subtle impacts may move

the

TV.

this

case,

make sure

install

the

fixers properly

that

theyare fixed to

the

all

the

way

the

end.

,. -

/;:

I " / /

, / v

.·

"'-'#11'

•

You

do not need

use

the cable guide

(G).

Use

depending

the installation condition.

• Cable guide

(G)

double-sided tape may not stick or may

not

stick

well

depending

your

wall

surface

(ex.:

uneven) or material. It may also lose stickiness

overtime

undersome installation conditions.

• Cable guides

(G)

may harden

stored in a cold place.

such

cases,

keep

them

at room temperature (around 20

degrees)

forl-2

hours.

• When removing cable guides

(41),

the

wall

may

damaged in some surroundings.

(Ex.:

wall

surface chipped,

paint chipped, etc.)

• When attaching cable guides

(G)

the

wall, we recommend installing

least 30 mm

from

the

connectorto

prevent damage

the cable guide due

the

distance between the

connectorand wall.

-English

-5-

-6-

•

careful

that

the

cable

not damaged when removing, moving, inclining, or horizontally adjusting

the

while

the

powerand and optical

fiber

cable are connected using cable

guides(.).

•

prevent cable damage when dismounting the

from the wall, disconnect

the

powercable

and

the

optical

cable before removing

the

wall

mount.

•

you

have used the cable cover,

first

disconnect

the

powercable and

the

One

Connect cable from

the

TV,

and

then remove

the

from the

wall

mount.

• When removing the

from the wall, make sure 2 people

lift

together.

not

apply directforce

the

display.

• When you grab the

to install, remove, adjust the horizontal level, or

tilt

the

wall

mount, do not apply direct

force

the display.

• When you handle the

to install, remove, adjust the horizontal level, or

tilt

the

wall

mount,

careful not to

damage any cables.

•

sure

that

the

and wall mount stand are

not

hit

with

excessive force

after

installing

the

wall mount.

The

wall

mount or

may

damaged orthe

connection

with

the

wall mount device may become unstable.

this

case,

reinstall the

wall

mount orconsult

expert

for

assistance.

• Check the product model

well

the

enclosed user manual

for

each product and check

that

the

wall

allows

mounting.

sure the

wall

stable. Ifthe

wall

weak, reinforce

before installation.

-Ifthe wall

not cement, check

with

a specialist to determine

whether

the

may

installed

it.

-Consult

expert installer

you do

not

have any background knowledge about

the

wall

you

want

install the

product

•

maintain product performance and prevent malfunctions, do not install in

the

following

locations.

-Places where there

a risk

vibration or shock:

The

product may

fall

and

damaged.

-Next to a sprinklersensor:

The

sensor may detect

the

heat from

the

and sprinklers may start.

-English

-Near high-pressure cables: The

may

get

interfered by high-pressure cable and

the

screen may not display

correctly.

-Near heaters:

The

may become overheated and malfunction.

not install anywhere otherthan avertical wall.

-Install

out

the reach

children.

not penetrate the

wall

install inside.

•

• •

lit

•••

" •

••

•

* •

• • • • • •

•••

" .

...

0 • •

• •

••••

••

•e••••••••••••

••

•

•••

••

•

••••

••

•••••

• •

·······

··

············

········

···-·

···A'···

Standard

Installation

Requirements

Wall

Type

Check

the

wall

type

before

installing.

sure to check

the

type and condition

the

wall

you

will

install

Materials

used may

differ

depending

wall

type.

Choose materials based

the

specifications below.

You

do not need

use

all

the

supplied screws. However,

you must

use

least 4 screws.

You

must

use

screws in

the

two

locations marked

-Choose

least

the

parts marked B

assemble

depending

surroundings.

•

Can

only

mounted

a concrete or

interior

wall

sufficientthickness. • First, check

the

status

the

wall

(type, thickness} flatness).

See

the diagrams below.

Min. 50 mm

- - .

------

---

Min.25

mil)

Min.

MDF,

(plywood)

xcluding gypsum

board thickness)

Hybrid

ncrete

walls

(excluding

gypsum board

thickness)

Min.

10mm

MDF,

(plywood)

•

Note

MDF

=Medium Density Fiberboard

=Plywood

-English

Ifthe wall surface

not completely

flat, gaps may form after

installation.

-7-

Walls made

thick

enough concrete

Wall

(2.5")

® Walls made

gypsum board

with

wood studs

MDF

-8-

(2.5")

L -

Installation

Requirements

•

sure to check the location

wooden studs

the

wall

before installing screws.

• Minimum wood stud size:

x102 mm

x 4 in) Make holes

mm)

first

before installing screws.

• Holes

for

screws must

made

the

center

studs.

•

Wood

may

split

when attaching

the

holes are not made.

• A standard stud distance

16"

supported.

(24"

not

supported)

Lt.

Samsung

not

responsible

for

problems

that

arise when

the

installation guide is

not

followed.

-English

Gypsum

Board

Dry

Wall, Sheet

Rock,

Gypsum-Board

010

optional

part.

WMN-M20E(B)

not

provided.

··

••

111'

IIJ

"it/

ilia

··

Wall

-English

10-

r--

-8==---

-9-

Inhaltsverzeichnis

Andere Samsung Rack & Stand Handbücher

Samsung

Samsung WMN-M10E Bedienungsanleitung

Samsung

Samsung SBP-300NB Bedienungsanleitung

Samsung

Samsung VG-SGSM11B/XC Bedienungsanleitung

Samsung

Samsung STN-SF40 Bedienungsanleitung

Samsung

Samsung WMN4270S Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Samsung

Samsung Sbr-100dcm Bedienungsanleitung

Samsung

Samsung WMN-M13E Bedienungsanleitung

Samsung

Samsung SHD-3000F2 Bedienungsanleitung

Samsung

Samsung WMN3000C Series Bedienungsanleitung

Samsung

Samsung WMN4070TT Bedienungsanleitung

Samsung

Samsung WISENET SBP-122HM Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Samsung

Samsung WMN-M13E Bedienungsanleitung

Samsung

Samsung Sbr-100dcm Bedienungsanleitung

Samsung

Samsung WMN-M22E Bedienungsanleitung

Samsung

Samsung WMN550M/XC Bedienungsanleitung

Samsung

Samsung WMN350M Bedienungsanleitung

Samsung

Samsung STN-W4075E Bedienungsanleitung

Samsung

Samsung Wall Mount Bedienungsanleitung

Samsung

Samsung WMN750M/XC Bedienungsanleitung

Samsung

Samsung SADT-103WM Bedienungsanleitung

Samsung

Samsung WMN-M12E Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung