Samsung WMN-M12E Bedienungsanleitung

SI\MSUNG

Cautions

when

installing

...

Mod

att1e

•••••••••••••

•

•••••••••••

WMN-Ml2E

,·

Width (mm) 520

Height (mm) 280.3

Thickness (mm)

15.9

tilt

(

Max.10°

Package

size

x Dx

(mm)

594

337

Package

weight (kg) 3.5±0.5

Max.

allowable

weight (kg)

Standard stud distance

supported

not supported

2017Y

SAMSUNG

Series, 49/55/65"

mm or more)

2017Y

SAMSUNG

Series, 49/55/65"

mm or more)

Compatible

TVs

2017Y

SAMSUNG

Series, 49/55/65"

or more)

Clearance from the wall (mm)

2018Y

SAMSUNG

Series, 55/65"

mm or more)

2018Y

SAMSUNG

Series, 55/65" (0 mm or more)

2018Y

SAMSUNG

Series, 55/65"

mm or more)

•

sure to

use

the

components and parts provided

for

installing the

wall

mount.

•

The

manual instructions and provided parts are based

the typical walls (made

wood

concrete).

(In

case

the

WMN-M12E(A)

model,

the

drywall

mounting parts are additionally provided.)

•

case

the other

cases,

use separate mounting parts or perform

wall

reinforcement in advance. If required, install

the

wall

mount

with

aid

expert.

•

cautious not

damage the

screen while installing the

wall

mount.

• Check your

TV's

model series. Then

use

the appropriate preparation methods

for

the support frames using

the

appropriate screws.

• Ifyou

not

the installation instructions suitable

for

your

model, the

wall

mount

and

connection may

unstable.

[]

·o·

·r-~·

,s,

2017Y

Q7FM/Q7CM/Q8CM

2017Y

Q9FM

2018Y

Q7FN/Q7CN/Q8CN

2018Y

Q9FN

-English

• When installing

uninstalling

the

wall

mount

supportframe, make sure 2 people

work

on it, and the

is off.

•

Use

flat

tablewhen

installing

the

wall

mount.

Use

the

packing material(cushion)

for

curved

TVs.

Flat

Curved

• Install

the

wall

mount

onlyon

the

wall

that

is larger

than

the

and

not

tilted.

After

installation,

the

cover

attachment

the

bottom

the

must

touch

the

wall. Otherwise,

the

wall

mount

must

not

be installed.

Wall

that

largerthan

(lnstallable) T

ted wall

(Not installable) Wall that

not largerthan the

wall mount

(Not installable)

• Before mounting

the

a wall, connect

the

powercable and One Connect cable

the

TV.

•

Use

the

included 3 m powercable

the

wall-mounted

and pow

socket are morethan

1.5

m apart.

• When installing I uninstalling

the

wall

mount, be careful not

damage

the

opticalcable. Especially,

careful

not

step on

the

optical cable.

•

Use

a screwdriver

assemble

the

supportframe. Using an electric screwdrivermaycause screw threads

wearout.

• The minimum distance between

the

and

wall

may

2-3

more depending on

the

wall

surface

installationconditions.

• The distance between

the

wall

and

the

left

right

side

the

may

differ

depending on

the

wall

and installation

conditions.

• When installing the

wall

mount,

the

too close

awall, scratches may occuron the back

the

on awall.

• A

lot

force is required

open

the

bracket before installing

the

wall

mount.

careful

not

hurt

yourselfwhen

opening

the

bracket. (Brackets

with

tilt

options are

difficult

open because they need

withstand

the

weight

the

TV.)

English

3 -

•

cases

with

tight

installation conditions, friction between

the

TV/accessories and the

wall

may damage the

wall

the

back

the

TV.

Use

a scratch

protector8

the picture in such

cases.

However, distance from

the

wall

may

increase.

(,:)

•

You

must

use

8 parts

the

picture

attach

series

TVs.

This restricts movement between the

and

wall

due

distance from the

wall

and prevents the

from leaning forward.

the

leans forward, use 2 overlapping 8 parts. This may

additionally

improve

the

inclination.

However, distance

from

the

wall

may increase.

• Acurved

may move

left

and

right

afterbeing installed to the

wall

mount.

You

can

suppress the

from moving

left

and right

using accessories

e-CO

together. (Adjust the horizontal length

the part

the

same.)

You

can

also suppress a Flat

from

moving

left

and

right

by using accessories

e-e.

However, distance

from

the

wall

may increase.

I e

•

Flat

-English

9--e

;

~~.

'-P

!1?

--------~--------~

Curved

•

there is a protruding part on

the

wall

where you wantto install

the

wall

mount,you may use accessoriese-e

secure enough distance between

the

and awall. (Adjust the horizontal length

the

part

the same.)

However,

the

distance

the

wall

will

become

larger.

9""----e

,._t

-e

~~---C&

,.~

-~·

• Ifyou secure distances using thoseaccessories, you may not

able to

use

the

tilt

option.

you wantto use

the

tilt

option,

the

secured distance

limited.

•

The

maximum

tilt

angle differs depending

the

model.

The

tilt

angle may

not

be maintained

the

wall

with

vibration.

•

After

wall

mount

installation, movement mayoccur

some

models depending

the

rearshape

the

TV.

this

case,

use

the

separation holder

(0).

Triangular

support

allows

stable

wall

mount

installation.

However,

distance

from

the

wall

may

increase.

English

• Ifyou cannot adjust the horizontal level by using the horizontal adjustment function, check

the installation was

done properly.

you cannot

use

the

horizontal adjustmentfunction,

the

fixers

the

wall

mount's support frame are not

properlyfixed. Make sure

install them properly.

•

The

horizontal level

that

can

adjusted

just

1to 2 degrees.

adjust the horizontal level

more angles than this

range, reinstall

the

wall

mount.

---~-~-~-~-~-----

---

----~=-=-~-~-~-~-~-

- -

l t t l

• Ifthe wall mount's fixers are

not

fixed

the end

shown

the

figure, subtle impacts may move the

TV.

this

case,

make sure to install the fixers properly

that

theyare fixed to the

all

the way

the end.

•

prevent cable damage when dismounting the

from the wall, disconnect

the

powercable and the optical cable

before removing

the

wall mount.

• When detaching the

from

the

wall,

first

pull

forward, and then

sure

that

two

people

pull

upward

simultaneously.

not apply directforce

the display.

-English

• When you grab

the

install, remove, adjust

the

horizontal level,

tilt

the

wall

mount, do

not

applydirectforce

on the display.

• When you handlethe

install

, remove, adjust

the

horizontal level,

tilt

the

wall mount, be careful

not

damage anycables.

•

sure

that

the

and

wall

mount

stand are

not

hit

excessive force

after

installing

the

wall

mount. The

wall

mount

maybe damaged

the

connection with

the

wall

mount

device maybecome unstable.In this

case,

reinstall

the

wall

mount

consult

expert

for

assistance.

• Check

the

product

model

well

the

enclosed usermanual

for

each productand check

that

the

wall

allows

mounting.

sure

the

wall

is stable. If

the

wall

is weak, reinforce

before installation.

the

wall

not

cement, check

with

a specialist

determine

whether

the

maybe installed on it.

-Consult

expert installer

you do

not

have any background knowledgeabout

the

wall

you

want

install

the

producton.

•

maintain product performance and prevent malfunctions, do

not

install

the

following locations.

-Places wherethere is a risk

vibration orshock:

The

product may

fall

and be damaged.

-Next

a sprinklersensor: The sensor may detectthe heat

from

the

and sprinklers may start.

-Nearhigh-pressure cables: The

may

get

interfered by high-pressure cable and

the

screen may

not

display

correctly.

-Nearheaters: The

may become overheated and malfunction.

-Do

not

installanywhere

other

than avertical wall.

-Install

out

the

reach

children.

not

penetrate

the

wall

install inside.

............................................

........

...

.............

..........

....

........

..........

....

...................

B A B

sure

check

the

typeand condition

the

wall

you

will

install on.

Materials

used may

differ

depending on

wall

type.

Choose materials based on

the

specifications below.

You

not

need

use

all

the

supplied screws. However,

you

must

use

least4 screws.

You

must

use screws in

the

two

locations marked

-Choose

least2

the

parts marked B

assemble

depending on surroundings.

hide

the

cables inside

the

wall, contactan expert

installer

-English

-··········

.......................................

...................................

:·············-···-··-······-···

(II

4 5

. 0 I

~lL:x

('cr~

'·

~l~!

' \

-i

----

·i

I i

[English]

..............................

B A B r·

(-_":

:L_

..............................

······························

..............................

-You must install

screws

the two locations marked

-When

you

attach the wall mount to t

wall, install

ews

on eithersi

the

screw

holes marked A

at least two of the

places

marked

[

Vous

devez

utiliser

des

vis

aux

deux

emplacements marques

d'un

Lorsque

vous

fixez

support mural

sur

lemur,

placez

les

vis

dans

les

orifices

indiques

par

unA

dans

mains

deux

emplacements indiques parun

spanol

-Debe utilizartornillos

las

dos

ubicaciones

marcadas

como

Para

fijarel soporte

pared,

instate tornillos a

cad

tado

los agujeros

marcados

como

nos

dos

ubicaciones

marcadas

como

8 9

)

Concrete, Bnck

Beton,

bnque

Concreto, ladnllo

[Englis

-Pleased refer

the

included

flyer

"Standard Installation Requirements by

Walt

ype~

for

the

materials needed and steps required

mount th

all

your

wall

type.

-If

you are

not

about

the

wall type you have or

abo

ut the

mate

ls you

need to install the wall mount, consult a professional insta

er.

[Fran\ais]

Veuillez

vous

repor

depliant indus«

Exigences

nerales d'installation

par

type

demur>>

ursavoirquels sont

les

materiels

requ

les

eta

pes

ivre

pour

installer

support

survotre

mur.

vous

n'etes

pas

sUr

quel

type

est

votre

murau

des

materiels

requis

pour

installer

support

mural,

veuillez

consulterun

installateur

profession

net.

[Espanol]

Consulte

eto

"Requisites

instalaci6n estilndar

segUn

el tipo

pared"

provisto

para

conocer

materiales

necesarios

los

pasos

requeridos

para

instalarel

soporte

cada

tipo

pared.

esta

seguro

conocer

com

posiciOn

pared

los

materiales

necesarios

para

instalarel

soporte,

comuniquese

con

instalador

profesional.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Rack & Stand Handbücher

Samsung

Samsung SHD-3000F2 Bedienungsanleitung

Samsung

Samsung STN-W4075E Bedienungsanleitung

Samsung

Samsung UN26C4000PD Bedienungsanleitung

Samsung

Samsung TWMB-1900 Bedienungsanleitung

Samsung

Samsung SADT-103WM Bedienungsanleitung

Samsung

Samsung QE32LS03TBKXRU Bedienungsanleitung

Samsung

Samsung WMN-M25EB/ZA Bedienungsanleitung

Samsung

Samsung WMN350M Bedienungsanleitung

Samsung

Samsung WMN8200SFXEN Bedienungsanleitung

Samsung

Samsung SCX-300CM Bedienungsanleitung

Samsung

Samsung WMN-M22E Bedienungsanleitung

Samsung

Samsung WMN-M13E Bedienungsanleitung

Samsung

Samsung WMN3000C Series Bedienungsanleitung

Samsung

Samsung WMN550M/XC Bedienungsanleitung

Samsung

Samsung WMN3000B Series Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Samsung

Samsung WMN-M15EB Bedienungsanleitung

Samsung

Samsung VG-SGSM11B/XC Bedienungsanleitung

Samsung

Samsung WMN-M13E Bedienungsanleitung

Samsung

Samsung SBP-300HM4 Bedienungsanleitung

Samsung

Samsung SADT-100EC Bedienungsanleitung

Samsung

Samsung Sbr-100dcm Bedienungsanleitung

Samsung

Samsung WMN4070SD Bedienungsanleitung

Samsung

Samsung SBP-300NB Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung