Samsung WMN4070SD Bedienungsanleitung

Angle Adjustment and Rotation Type

Wall-Mount Bracket Installation Guide

WMN4070SD

Product Image

Components

Only use the supplied components for the bracket installation.

Safety Instructions

Be sure to contact an authorized service center when installing your set.

1. Be sure to keep the product away from children. There can be serious damage on the head when hit by the edge of the product.

2. Be careful when you adjust the angle or rotate the set. The product can be damaged if it is too close to touch the wall.

(Attach some sponges to 4 corners of the product to avoid the product or wall damage.)

3. Do not install the product in a place with high temperature and high humidity. Avoid to install the product on the wall which can-

not bear the weight.

4. Since there is a danger of electric shock, do not insert your fi ngers into the TV stand installation hole while installing the TV.

5. Make sure to cover the TV stand installation hole with the hole cover supplied with the TV before completing the wall installation.

Contact a qualified technician at your dealer for

moving or replacing the product after the installation.

Do not hang on or give sudden impacts to the product.

Angle Adjustment Bracket

Accessories

LFD

Screwⓑ: 4

RH, M8,

L23, WHT

Screwⓐ: 7 Anchor : 7

Wire Fixing Tool : 1Assembling Tool

WMN4070SD-eng-wall mount.indd 1 2011-06-22 �� 6:04:17

Wall Bracket Assembly

1Install the angle adjustment bracket on the wall as

shown in the figure.

Tighten the angle adjustment bracket by using anchors

and screwsⓐorderly from ①to ⑦. (Turn the rotating part

of the bracket to the right or left to install the bracket more

easily.)

If it cannot be installed on the assigned area, install at the

nearest place.

Check the solidity of the wall before the installation. Strengthen the wall and install the bracket if the wall is

not firm enough.

The supplied screws and anchors are for installing on concrete walls.

For the wall of plaster, marble, or steel, use the appropriate screws.

2Remove the screws on the product. Tighten the 4 screwsⓑon the back panel by using the assembling tool.

Be sure that 5 mm of each screw is left to be unscrewed.

(About 5 mm space is required to hang on the angle adjustment bracket.)

※When installing the LFD, assemble the LFD using the holder-ring injection mold supplied with the LFD.

Supplied

Holder-Ring

Mount the product on the wall bracket. Be sure to check on the left and right side to see if it is properly fixed.

Be careful when installing the product or adjusting the angle as fingers can be caught in the holes.

Be sure the wall bracket is securely fixed to the wall. Falling down the product may cause physical damage.

LFD

How to Tighten Anchors or Screwsⓐ

※Use the drill with the required size when making a

hole in the wall.

Be sure to follow the directions for the installation

to avoid safety problems.

Make a hole in the wall with the drill

of 6X50. (WMN-2370 : 5X40)

Clean up the hole.

Insert the supplied anchor to the hole.

Match the angle adjustment bracket

to the holes on the wall and tighten

the screwsⓐ.

23 65

4 7

WMN4070SD-eng-wall mount.indd 2 2011-06-22 �� 6:04:18

3Pull the wall bracket fixing part forward. Two people are required to install the product on the assigned area of the

wall bracket.

4For managing the power cord and other cables for peripheral equipments, bundle the wires by using the supplied

wire fixing tool. Be sure the wires are not unbundled or came off when rotating or operating.

※Insert the cables and pull the angle adjustment bracket forward. Arrange the wires by using the hole to avoid the

interference with wires when rotating the set.

Check the operation 2 ~ 3 times and fix the wall molding if it works properly.

WMN4070S

Fix the TV set to the wall bracket and tighten again with 4 screwsⓑby using the

assembling tool.

(Torque : 10 ~15 Kg)

WMN4070SD-eng-wall mount.indd 3 2011-06-22 �� 6:04:18

Wall Bracket Angle Adjustment

※The smooth moving mechanism is applied to this product to move the product smoothly for

convenience.

Do not adjust the angle with force. The product can be

damaged if it is too close to touch the wall.

Hold the left and right side of the product when you want

to adjust the left and right angle.

Hold the top center to adjust the up and down angle.

Product Specifications

[ Set Fixing Part ] [ Screw Fixing Part ]

Product Standards

Information in this document is subject to change without notice.

WMN4070SD

Width (mm) 248

Height (mm) 255

Dept (mm) 30

Weight (Kg) 2.4

Bracket VESA Standard 200 X 200

248

200

150

210

248

197.4 30

200

134

160

255

-10°~10°

-20°~20°

※You can adjust the angle vertically within a range of

-10° ~ 10° and horizontally within a range of -20° ~ 20°.

The adjustable angle range may be vary depending on

the model.

WMN4070SD-eng-wall mount.indd 4 2011-06-22 �� 6:04:18

Inhaltsverzeichnis

Andere Samsung Rack & Stand Handbücher

Samsung

Samsung STN-W4075E Bedienungsanleitung

Samsung

Samsung SCX-300CM Bedienungsanleitung

Samsung

Samsung WMN8200SFXEN Bedienungsanleitung

Samsung

Samsung WMN-M12E Bedienungsanleitung

Samsung

Samsung WMN-M21E Bedienungsanleitung

Samsung

Samsung WMN-M E Series Bedienungsanleitung

Samsung

Samsung SBP-300NB Bedienungsanleitung

Samsung

Samsung Harman AMX VARIA-ACS-810A Bedienungsanleitung

Samsung

Samsung WMN4270S Bedienungsanleitung

Samsung

Samsung WMN-M25EB/ZA Bedienungsanleitung

Samsung

Samsung WMN-M22E Bedienungsanleitung

Samsung

Samsung WMN-M10E Bedienungsanleitung

Samsung

Samsung Sbr-100dcm Bedienungsanleitung

Samsung

Samsung WMN3000B Series Bedienungsanleitung

Samsung

Samsung WMN-4270SD Bedienungsanleitung

Samsung

Samsung SKK-DD Bedienungsanleitung

Samsung

Samsung Wisenet SBP-160TM Bedienungsanleitung

Samsung

Samsung WMN-1000BD Bedienungsanleitung

Samsung

Samsung TWMB-1900 Bedienungsanleitung

Samsung

Samsung WMN-M20E Bedienungsanleitung

Samsung

Samsung WMN-M13E Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Samsung

Samsung WMN550M Bedienungsanleitung

Samsung

Samsung Q7FN Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung