Samsung SC96P series Bedienungsanleitung

, _ , ,,

,SO96_,,,,,,,,,,,,,,serles

UU_ Oc_NQ,,,F,

er manu,,,a,,,i,,

100%

Recycled Paper

T_'l,s"'mar_ual,,_i,smade wi_h 1"80% recycl'ed pr_,er.

the possibilities

Thank you for purchasing a Sarnsung product

To receive more complete service,

please register your product at

www.samsung.com/register

nform on

SAFETY INFORMATION

WARNING

• Before operating the appliance, please read this manual thoroughly and retain

it for your reference.

• Because the following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

CAUTION/WARNING SYMBOLS USED

Z_ Indicates that a risk of death or serious injury exists.

WARNING

Z_ Indicates that a risk of personal injury or material damage exists.

CAUTION

OTHER SYMBOLS USED

Represents something you must NOT do.

[_ Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

This vacuum cleaner is designed for domestic household use only. Do not use this

WARNINGvacuum cleaner to clear building waste or debris. Do not use this vacuum cleaner with

any of the filters removed as this could cause damage to the internal components and

void your warranty.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG INSTRUCTIONS

- To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than

the other). This plug will fit in a polarized outlet only one way. Ifthe plug does net fit fully in the

outlet, reversethe plug. Ifit stilldoes net fit, contact a qualified electrician to installthe proper

outlet. De net change the plug in any way.

2 safety information

nform on

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, you should always follow these basic precautions:

READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACCUM

WARNING- Torodocothor,sko,f,ro,o,octr,cshock,or,ojory"

1. Do not leave the appliance unattended when it is plugged in. Unplug from the outlet

when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow the vacuum to be used as a toy. Pay close attention when the vacuum is

used by or near children.

4. Use only as described in this manual. Use only manufacturer's recommended

attachments.

5. Do not use with a damaged cord or plug. Ifthe appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, bring it to a service

center.

6. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or

pull the cord around sharp edges or corners. Do not run appliance over the cord.

Keep the cord away from heated surfaces.

7. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

8. Do not handle the plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked.

Keep free of dust, lint, hair,and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers, and all parts of your body away from openings and

moving parts.

11. Turn off all controls before unplugging.

12. Use extra care when cleaning on stairs.

13. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in

areas where they may be present.

14. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

15. Do not use without the dirt cup and/or filters in place.

16. Do not use the vacuum cleaner in an enclosed space filled with vapors given off by oil

base paint, paint thinner, some moth proofing substances, flammable dust, or other

explosive or toxic materials.

17. Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

18. The hose contains electrical wires. Do not use when damaged, cut, or punctured.

19. Always turn off this appliance before connecting or disconnecting either the hose or

motorized nozzle.

20. Unplug before connecting the motorized nozzle.

21. Hold the plug when rewinding onto the cord reel. Do not allow the plug to whip when

rewinding.

safety information $

ASSEMBLING THE VACUUM 05 Assemblingthe vacuum

OPERATING THE VACUUM 06 Power cord

06 On/Off switch

07 Power control

08 Power Brush

MAINTAINING THE TOOLS AND

FILTERS 09 Using accessories

10 Maintaining floor tools

11 Emptying the dust bin

12 Cleaning the dust pack

14 Cleaning the outlet filter

14 Changing the battery

TROUBLESHOOTING

4 contents

assemb nq the VaCLALAm

OPTIONS

'i17/1 77/ iiii ...........

.... ......

o lease do not push the button of

the dust bin handle when carrying

the machine. (See page 12 for

exact location.)

Go When storing, park the floor nozzle.

assembling the vacuum 5

o_r_ nGth_ V_OLALAm

POWER CORD

• When removing the plug from an electrical outlet, grasp the

CAUTION plug, not the cord.

ON/OFF SWITCH

6 operating the vacuum

POWER CONTROL

RADIO FREQUENCY REMOTE-CONTROL

- HOSE

1.Vacuum cleaner ON/OFF( C_ }

Press the ON/OFF button to operate the

vacuum cleaner. Press again to stop the

vacuum cleaner.

2. Vacuum cleaner suction(-/+} and Auto Mode

Pressthe SUCTION(-/+)AUTO button to change

the suction power of the vacuum. When you

start, each time you pressthe button, you

increase the suction power. After you pressthe

suction button three times, the vacuum reaches

its maximum suction power. Then,an additional

press will set the vacuum to Auto mode. InAuto

mode, the vacuum adjusts the suction power automatically. After the vacuum has reached

Auto mode, when you press the button, you return itto its minimum

In short, suction operates in this sequence: 1 - 2 - 3 - AUTO - 1 - 2 - 3 - AUTO, etc.

3. BRUSH ON/OFF

Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the

Power Brush.

Don't cover the handle transmitter when you use a handle control button.

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

=BODY

Pressthe power ON/OFF button repeatedly to start

and to stop the vacuum cleaner.

(OFF _ ON _ OFF)

lf the remote handle control is not working, the

cleaner can be operated using the ON/OFF

button on the body of the machine.

ransmitter

!!iii

The ON/OFF button operates the vacuum cleanner or stops it.

The filter light is illuminated when the dust pack requires checking or

emptying. An audio signal will also sound.

This indicates that the automatic suction mode is selected. The level of

suction is indicated by the LED display.

operating the vacuum 7

POWER BRUSH

VACUUMING WITH THE POWER BRUSH

1. Attaching the Power Brush

The hose must be plugged into the canister and the

power brush must be plugged into the hose and

extension wand.

2. Vacuuming

•For best results, move the power brush slowly using

short, overlapping strokes.

•For heavily soiled areas, repeat strokes in several

directions.

•Push the height adjustment button to match the surface being cleaned.

•Press the height adjustment button at the bottom of the wand until it clicks.

z_ Do not invert the power brush while it is running.

CAUTION

3. Checking the Performance of the Power Brush

You can check whether the power brush is operating correctly by lifting up the

extension tube slightly to view the back of the brush.

The Power Brush will not operate when it is jammed or the unit is turned off.

Ifthe Power Brush is jammed, unplug the power cord from the electrical outlet.

Turn the power brush over and remove the jammed object.

Turn the power brush back to the vacuuming position and resume vacuuming.

OVERLOAD PROTECTOR

The overload protector shuts off the brush motor

if the floor brush becomes obstructed. The floor

brush will stop, but the suction motor will continue

to run. To reset the overload protector, turn the

vacuum off and unplug it. Clear the obstruction from

the floor brush area. Use a pen tip to press down

the reset switch. Turn the vacuum on and continue

cleaning.

8 operating the vacuum

ma nta nnq the too s

USING ACCESSORIES

PIPE

• Adjust the length of the telescopic pipe by sliding

the length control button located in the center of the

telescopic pipe back and forth.

To check for blockages, separate the telescopic pipe

from the vacuum, and then adjust to shorten. This allows

for easier removal of waste clogging the tube.

ACCESSORIES (OPTIONAL)

Push the accessory onto the end of

the hose handle.

Pull out the dusting brush to use the

crevice tool.

maintaining the tools and filters 9

MAINTAIN FLOOR TOOLS

CHECKING the Rotating Floor Brush and Drive Belt

You should check your vacuum cleaner's rotating floor brush and drive belt regularly for

wear or damage. You should also clean strings, hair, and carpet fibers off the brush and

brush ends. These can wrap around the brush and hamper its ability to effectively clean

your carpet. Also remove any debris that has accumulated under the brush cover.

1. Unplug the vacuum from the electrical outlet.

2. Place the handle in low position and turn the vacuum

cleaner over so the bottom side is up.

3. Remove the six screws (at arrows, right) with ascrewdriver.

4. Remove the brush cover from the floor brush.

5. Grasp the rotating floor brush at both ends and lift.

6. Clean string, hair and other debris off the rotating floor

brush, paying particular attention to brush ends.

7. Clean string, hair and other debris off the motor pulley and

drive belt areas.

8. Check the drive belt carefully for wear, cuts or stressed

areas.

9. Check the air passageway for obstructions. Remove

debris from this area.

The rotating floor brush could cause the fringe of a rug

OAUnONto become tangled within the vacuum.

Use caution and turn off the floor brush when

vacuuming throw rugs with fringe.

REPLACING the Drive Belt

Make sure that the vacuum is unplugged.

With the rotating floor brush removed from the vacuum

cleaner, grasp the old drive belt and remove it from the

motor pulley. Discard the old drive belt.

Place the new drive belt over the motor pulley and stretch

the other end over the rotating floor brush in the space

between the bristles.

Place the ends of the rotating floor brush down into the

slots on the sides as shown.

Turn the rotating floor brush by hand several times in the _'_"_'_*'_

direction of the motor pulley. If properly installed, the drive belt will center itself on the

rotating brush crown.

Reposition the brush cover and screws. Tighten the screws securely.

10 maintaining the tools and filters

Andere Handbücher für SC96P series

Inhaltsverzeichnis

Sprachen:

Andere Samsung Staubsauger Handbücher

Samsung

Samsung VS15A6032R5 Bedienungsanleitung

Samsung

Samsung SS75N80 Series Bedienungsanleitung

Samsung

Samsung SU8583 Bedienungsanleitung

Samsung

Samsung VC-7715VP Bedienungsanleitung

Samsung

Samsung SU2911 Bedienungsanleitung

Samsung

Samsung POWERbot SR1 M70 Series Bedienungsanleitung

Samsung

Samsung VS25C97 Series Bedienungsanleitung

Samsung

Samsung VCDC12 Series Bedienungsanleitung

Samsung

Samsung DJ68-00369L Bedienungsanleitung

Samsung

Samsung SC5120 Bedienungsanleitung

Samsung

Samsung SS60M60 Series Bedienungsanleitung

Samsung

Samsung VAC8913EP Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SR8825 Referenzhandbuch

Samsung

Samsung VAU5224S Bedienungsanleitung

Samsung

Samsung SR20H9050U Bedienungsanleitung

Samsung

Samsung Jet Bot VR50T95 Series Bedienungsanleitung

Samsung

Samsung SW75 Series Bedienungsanleitung

Samsung

Samsung DJ68-00330A Bedienungsanleitung

Samsung

Samsung SC07M25 Series Bedienungsanleitung

Samsung

Samsung VC-5853 Bedienungsanleitung

Samsung

Samsung Jet Bot VR50T95 Series Bedienungsanleitung

Samsung

Samsung SC6200 SERIES Bedienungsanleitung

Samsung

Samsung SU33 SERIES Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch