Sanyo SC-CX910 Bedienungsanleitung

HOUSEHOLD USE ONLY

INSTRUCTION MANUAL

SC-CX910

VACUUM CLEANER

Hose Stopper /

Insert the hose stopper all the

way up to the air inlet.

To detach it, press button on

the hose stopper and pull the

hose toward you.

NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /

Air inlet

Button

Cord Rewind Button /

To pull the cord back into the unit, press the cord rewind button.

Caution:

Hold the plug when rewinding the

cord so that the plug does not

damage furniture, hands, the vacuum

cleaner or the cord by hitting them.

Holding the plug will make rewinding

smoother.

Cord rewind button

Switch

Start or stop vacuum cleaner by pushing on the switch.

Cord and Plug /

Pull out the cord and connect the wall outlet.

Do not extend the cord from the unit beyond the red

marker line.

Insert securely by turning

Dust Compartment

Power Control /

Set the POWER CONTROL to

+ / MAX for maximum

suction.

In the position - / MIN the

suction power is decreased.

+ / MAX

- / MIN

Attachments /

For vacuuming edges and gaps.

Crevice tool /

The head of the brush

can rotate for vacuuming fragile or easily scratched items.

Round brush /

Pull

Extension Pipe/

The pipe is adjustable according to the height of the user.

(How to expand / contract the pipe)

Adjust the length of the pipe while pushing the slider.

Make sure that you hear a click sound.

Caution

Please do not place your hand on the

expansion pipe slider during operation.

Please do push the slider in when

adjusting the length.

Slider

Pipe holder

Put the round

brush here

when not in use.

MAX

MIN

Clamp button

The two-way floor nozzle has lever with

two positions.

FLOOR:

For vacuuming wooden floors,

linoleum or plastic covered

floors.

RUG:

For vacuuming rugs and

carpets.

Floor Nozzle /

FLOOR

RUG

FLOOR

RUG

Hose

Connect the angled pipe

The full vacuum power of the cleaner may be too strong in certain cases, for

instance when vacuuming curtains and draperies. In these cases, turn the

vacuum power adjustment ring (on the hose) to control the vacuum power.

Match the hole in the ring with the hose hole to reduce the power.

Vacuum Power Adjustment Ring /

Vacuum power

adjustment ring

Angled pipe

DUST DISPOSAL /

Turn the vacuum cleaner off, pull

the hose out of the unit and empty

out the dirt as follows:

MAX

1. Press the clamp button

and take out the dust

compartment.

Empty the dust

compartment when

contents reach the

MAX mark.

2. In figure, push the

slider, open the dust

cover and empty the

dust compartment.

Use the garbage bags

to cover the dust cup

to prevent dust splash

when you empty the

compartment.

3. Clean the dust

compartment then

reattach the vacuum

cleaner.

Dust compartment

Clamp button

Dust compartment cover

MAX

Slider

CLEAR THE DUST COMPARTMENT /

Main filter

Pre-Filter

Remove the dust compartment

and empty dust compartment

as follows.

1. As the arrow shown, turn the

duster knod several times and

waste in dust compartment

will drop out.

2. In figure, push the duster

holder and take the pre-filter

and main filer.

3. Clean the pre-filter and main

filter with water.

Allow each parts to dry

completely after cleaning.

Do not attempt to dry with a

hair dryer or by placing in a

clothes dryer. Hot air may

cause the filters to warp.

Don't need to wash after

use each time.

Caution:

Pre-Filter

Duster holder

Duster Knod

4. Insert the main filter into

the pre-filter as shown.

5. Align the ribs of the main filter

to match the shape of the

hole in the dust compartment

and press firmly to insert.

Hole

Ribs

13.This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

1. Operating without the dust compartment in place will allow dust to enter

could damage the vacuum cleaner.the motor and

2. Keep the vacuum cleaner away from stoves and other heat sources.

Heat can deform and discolor the plastic parts of the unit.

3. Keep the vacuum cleaner free of insecticides. Do not wipe with benzene,

thinner, petrol or other oils which might cause discoloration or cracking.

To clean the body and hose, dampen a cloth with a mild detergent and

wipe clean.

4. Blocking the suction inlet or allowing the dust to clog the hose will

decrease the efficiency of the motor.

5. Be sure not to push the clamp button while carrying the vacuum cleaner.

6. Never try to vacuum the following objects. They may damage the unit or

cause a fire.

* Wet things, mud, soil, and fluids

* Burning cigarettes

* Needles and razor blades

* Inflammable materials such as gasoline and thinner

Construction waste.

9. Pull out the plug from the power source after use. Grasp the plug-not

the cord-when pulling out the plug.

Pulling on the cord may lead to short circuiting.

10. Long and continuous use causes the exhaust air and the body of the

vacuum cleaner to become warm. This, however, does not denote

malfunction.

11.When vacuuming places that are very dusty, and also when vacuuming

regularly, empty the dust compartment before it becomes completely

filled.

Frequent emptying lengthens the life of the motor and maintains strong

suction power.

12.If the supply cord of this appliance is damaged, it must only be replaced

by a repair shop appointed by the manufacturer, in order to avoid a

hazard.

14.Young children should be supervised to ensure that they do not play with the

appliance.

A FEW PRECAUTIONS

8. Please do not hold the hose to lift the vacuum cleaner and sway or move it,

otherwise, it will be caused the damage for human body or vacuum cleaner.

1. Open the filter cover.

2. Remove the HEPA Filter.

3. Insert a new HEPA Filter,

close the filter cover.

2. HEPA

3. HEPA

Caution:

Be sure the HEPA Filter is

facing the right direction.

HEPA Filter

HEPA

Under normal usage, the HEPA Filter will require replacement once every one year;

however, vacuuming large amounts of extremely fine dust, powder or similar material

over a long period of time may decrease airflow performance through the filter. If this

occurs, it may become necessary to replace the HEPA Filter more often. Only use

genuine Sanyo replacement filters.

REPLACING THE HEPA FILTER /

HEPA

Filter cover

Groove Jut

Please take the filter cover

jut insert into the groove,

then press the filter cover.

To assure the best results, we recommend cleaning the filters once every

one (1) year, depending on usage.

Filter

Take out the filter and

cleaned by water.

Caution:

Never insert the filter into

the vacuum cleaner unless

it is completely dry.

CLEANER OF FILTER /

Please do not use the vacuum cleaner without properly fixing the filter, otherwise, it may

cause the motor to smoke, even burn into fire since the filter is part of functional components.

CAUTION /

HOW TO USE THE HOSE STAND /

The vacuum cleaner with

the floor nozzle, wands and

hose can be stored while

still connected.

Insert the wand holder

into the wand-

holder hole.

Caution:

Do not carry the vacuum cleaner

while it is in the storage position.

(Injury or damage may result if

the hose or extonsion pipe

becomes unattached.)

9BF-D-P111-09604 1005-

E/CHN

CARE AND MAINTENANCE

If you have a problem with your vacuum cleaner, consult the handy guide below. If the

vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo

Service Center.

Wand holder

Wand-holder hole

Inhaltsverzeichnis

Andere Sanyo Staubsauger Handbücher

Sanyo

Sanyo SC Tc4000 Bedienungsanleitung

Sanyo

Sanyo SC-B1211 Bedienungsanleitung

Sanyo

Sanyo SC-U123 Bedienungsanleitung

Sanyo

Sanyo SC-TA3000 - Revo Upright Bagless Vacuum... Bedienungsanleitung

Sanyo

Sanyo SC-296T Bedienungsanleitung

Sanyo

Sanyo SC-X1000P Bedienungsanleitung

Sanyo

Sanyo SC-52 Bedienungsanleitung

Sanyo

Sanyo SC-JS2B Bedienungsanleitung

Sanyo

Sanyo SC 610 Bedienungsanleitung

Sanyo

Sanyo SC-TA3000 - Revo Upright Bagless Vacuum... Bedienungsanleitung

Sanyo

Sanyo SC-183L Bedienungsanleitung

Sanyo

Sanyo SC164R Bedienungsanleitung

Sanyo

Sanyo SC204C Bedienungsanleitung

Sanyo

Sanyo SC-27Y Bedienungsanleitung

Sanyo

Sanyo SC-150 Bedienungsanleitung

Sanyo

Sanyo SC 820 Bedienungsanleitung

Sanyo

Sanyo SC-35A Bedienungsanleitung

Sanyo

Sanyo SC-F1201 - Upright Bagless Vacuum Cleaner Bedienungsanleitung

Sanyo

Sanyo SC-18(L) Bedienungsanleitung

Sanyo

Sanyo 505 SERIES Bedienungsanleitung

Sanyo

Sanyo SC-B1221 Bedienungsanleitung

Sanyo

Sanyo SC-WP110 Bedienungsanleitung

Sanyo

Sanyo SC 25 Bedienungsanleitung

Sanyo

Sanyo SC-S700P - Powerhead Canister Vacuum Cleaner Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung