Sartorius 16274 Bedienungsanleitung

80260-000-50

Operating Instructions | Betriebsanleitung

Stainless Steel In-Line Filter Holder |

Edelstahl-Druckfiltrationsgerät

Type | Typ 16274

80260-000-50

English page 

Deutsch Seite 37

Contents

Operating Instructions Stainless Steel In-Line Filter HolderType 16274 3

Contents

1 About these Instructions............................................................. 5

1.1 Scope ..............................................................................5

1.2 Accompanying Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.3 Target Groups......................................................................5

1.4 Symbols Used......................................................................6

1.4.1 Warnings in Operation Descriptions........................................6

1.4.2 Other Symbols..............................................................6

2 Safety Instructions ....................................................................7

2.1 Intended Use.......................................................................7

2.2 Personnel Qualification ............................................................7

2.3 Proper Working Order of the Device...............................................7

2.4 Components Under Pressure ......................................................8

2.4.1 Overpressure ...............................................................8

2.5 Compatibility of Media and Materials ..............................................8

2.6 Hot Surfaces .......................................................................8

2.7 Conduct in an Emergency .........................................................8

2.8 Accessories, Consumables, and Spare Parts .......................................9

2.9 Personal Protective Equipment....................................................9

3 Device Description..................................................................10

3.1 Device Overview ..................................................................10

3.2 Device Connections ..............................................................11

3.3 Functionality ......................................................................12

4 Installation ...........................................................................13

4.1 Scope of Delivery .................................................................13

4.2 Selecting an Installation Site ......................................................13

4.3 Unpacking ........................................................................14

4.4 Mounting the Device..............................................................14

5 Getting Started ......................................................................16

5.1 Preparing Device Connection.....................................................16

5.1.1 Dismantling the Device....................................................16

5.1.2 Cleaning the Device .......................................................17

5.1.3 Reassembling the Device..................................................17

5.2 Inserting a Membrane Filter.......................................................18

5.3 Sealing the Device ................................................................18

5.4 Sterilizing the Device..............................................................19

6 Operation...........................................................................20

6.1 Performing an IntegrityTest......................................................20

6.2 Filtering Liquids ...................................................................21

7 Maintenance Schedule..............................................................22

8 Malfunctions........................................................................22

9 Decommissioning ...................................................................23

Contents

4 Operating Instructions Stainless Steel In-Line Filter HolderType 16274

10 Storage and Shipping ...............................................................24

10.1 Storage...........................................................................24

10.2 Returning the Device and Parts .................................................. 24

11 Disposal.............................................................................25

11.1 Information on Decontamination ................................................25

11.2 Dismantling the Device ..........................................................25

11.3 Disposing of the Device and Parts ...............................................26

11.3.1 Information on Disposal ..................................................26

11.3.2 Disposal...................................................................26

12 Technical Data ......................................................................27

12.1 General Data......................................................................27

12.2 Dimensions and Weight...........................................................27

12.3 Ambient Conditions at the Installation Site .......................................27

12.4 Operating Conditions.............................................................27

12.5 Device Connections ..............................................................27

12.6 Materials .........................................................................28

12.7 Compatibility of Media and Materials ............................................28

13 Accessories and Spare Parts ........................................................34

13.1 Accessories ......................................................................34

13.1.1 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

13.1.2 Connectors, Pressure Tubes and Adapters ...............................34

13.1.3 Recommended Filters ....................................................34

13.1.4 Pressure Vessels with TC 50.5 Connection ...............................35

13.1.5 Other .....................................................................35

13.2 Spare Parts .......................................................................35

14 Sartorius Service ....................................................................36

Operating Instructions Stainless Steel In-Line Filter HolderType 16274 5

About these Instructions

1 About these Instructions

1.1 Scope

These instructions are part of the device. These instructions apply to the

device in the following version:

Device Model

Stainless steel pressure filtration device 16274

1.2 Accompanying Documents

t In addition to these instructions, observe the following documentation:

— Certificates on the device or its components

— Certificate of manufacture and pressure test

1.3 Target Groups

These instructions are addressed to the following target groups. The target

groups must possess the specified knowledge.

Target group Knowledge and responsibilities

User The user is familiar with the operation of the

device and the associated work processes. They

understand the hazards which may arise when

working with the device and know how to

prevent them.

The user is trained in the operation of the device.

The training is carried out by the operating

engineer | laboratory manager or the operator of

the device.

Operating engineer |

laboratory manager

The operating engineer | laboratory manager

makes decisions about the use and operating

conditions of the device.

Operator The operator of the device is responsible for

ensuring compliance with workplace health and

safety regulations.

The operator must ensure that all persons who

work with the device have access to the relevant

information and are trained in working with the

device.

6 Operating Instructions Stainless Steel In-Line Filter HolderType 16274

About these Instructions

1.4 Symbols Used

1.4.1 Warnings in Operation Descriptions

WARNING

Denotes a dangerwith the risk that death or severe injury may result if it is

not avoided.

CAUTION

Denotes a hazard that may result in moderate or minor injury if it is not

avoided.

NOTICE

Denotes a dangerwith the risk that property damage may result if it is not

avoided.

1.4.2 Other Symbols

t  Required action: Describes actions which must be carried out.

y Result: Describes the result of the actions carried out.

Operating Instructions Stainless Steel In-Line Filter HolderType 16274 7

Safety Instructions

2 Safety Instructions

2.1 Intended Use

The device was developed for sterile filtration of difficult-to-filter liquids

(e.g. serum) and particle removal from solvents or viscous liquids (e.g.

photoresist) and is intended for general laboratory use.

The device is exclusively designed for use in accordance with these

instructions. Any further use beyond this is considered improper.

If the device is not used properly:The device’s protective systems may be

impaired. This can lead to unforeseeable personal injury or property

damage.

Operating conditions for the device

Do not use the device in potentially explosive environments. Only use the

device indoors.

The device may only be used with the equipment and under the operating

conditions described in the Technical Data section of these instructions and

on the device’s type plate.

Modifications to the device

You may not modify or repair the device or make any technical changes.

Any retrofitting or technical changes to the device are only permitted with

prior written permission by Sartorius Stedim Biotech.

2.2 Personnel Qualification

Persons who do not possess adequate knowledge about how to use the

device safely may injure themselves and other persons.

If a particular qualification is required for an activity: The target group will be

specified. If no qualification is specified: The activity may be carried out by

the “operator” target group.

2.3 Proper Working Order of the Device

A damaged device or worn parts may lead to malfunctions or cause hazards

which are difficult to recognize.

t Only operate the device when it is safe and in proper working order.

t Complywith the maintenance intervals (for intervals and maintenance

work, see Chapter “7 Wartungsplan”, page 56).

t Have any malfunctions or damage repaired immediately by Sartorius

Service.

8 Operating Instructions Stainless Steel In-Line Filter HolderType 16274

Safety Instructions

2.4 Components Under Pressure

2.4.1 Overpressure

If the device is subjected to excessive pressure: The device may be

damaged. Liquids or gases may escape uncontrollably and cause serious

injuries to personnel.

t Stay within the permitted temperature ranges (for the permitted ranges,

Chapter “12 Technical Data”, page 27).

t Before the device is pressurized: Check all detachable connections are

fitted securely.

t Connect devices for pressure monitoring, e.g. a pressure gage.

2.5 Compatibility of Media and Materials

The media used must be suitable for the device, accessories, and

consumables. The media must not corrode the device and seals.

If the materials are corroded: Parts of the device may be damaged, e.g.

seals. Damaged seals can lead to the leakage of media.

t Only use accessories, consumables, and spare parts that are compatible

with the media used (for the device materials, see Chapter “12.6

Materials”, page 28, for the chemical resistance of the materials, see

Chapter “12.7.1 Chemical Resistance of the Device Materials”,

page 28 and Chapter “12.7.2 Chemical Resistance of the Seal

Materials”, page 30).

t Only use accessories, consumables, and spare parts that are in proper

working order.

t For special applications or ambiguities, request written approval for the

compatibility from Sartorius Stedim Biotech.

t When using chemical cleaning agents: Observe the manufacturer’s

material safety data sheets and the applicable legislation and accident

prevention laws.

2.6 Hot Surfaces

Depending on the application, parts of the device may heat up so much

during operation that surfaces become hot. There is a risk of burning if body

parts touch these surfaces.

t Avoid contact with hot surfaces.

t Before working on the device: Leave the device to cool down.

t Wear personal protective equipment.

2.7 Conduct in an Emergency

If there is immediate danger of personal injury or equipment damage, e.g.

due to malfunctions or dangerous situations, the device must be immedi-

ately taken out of operation.

Operating Instructions Stainless Steel In-Line Filter HolderType 16274 9

Safety Instructions

2.8 Accessories, Consumables, and Spare Parts

Unsuitable accessories, consumables, and spare parts can adversely affect

functionality and safety, and have the following consequences:

— Risk of injury to persons

— Damage to the device

— Device malfunctions

— Device failure

t You should only use approved accessories, consumables, and spare parts

supplied by Sartorius Stedim Biotech.

t Only use accessories, consumables, and spare parts that are in proper

working order.

2.9 Personal Protective Equipment

Personal protective equipment protects against risks arising from the device

and the material being processed. If the personal protective equipment is

missing or unsuitable: Personnel may be injured.

Protective Equipment

Designation Explanation/examples

Protective work clothing Tight-fitting work clothing with low tear

resistance, tight sleeves, and without any

projecting parts./ Protects against getting

caught in moving parts or chemicals, heat and

injuries.

Safety gloves Protect against chemicals, heat, and injuries.

Safety glasses Protect against substances escaping under

high pressure, and liquid spray and splashes.

t Wear appropriate personal protective equipment.

t If the workplace or the process in which the device is used requires

additional safety precautions: Additionally wear the appropriate personal

protective equipment.

10 Operating Instructions Stainless Steel In-Line Filter HolderType 16274

Device Description

3 Device Description

3.1 Device Overview

Fig.1: Stainless steel pressure filtration device

Pos. Designation Description

1 Upper part of device With lasered data (order number, serial number, pressure, volume)

2 O-ring Silicone

3 Backflow prevention device PTFE coated

4 Filter support PTFE coated

5 O-ring Silicone

Inhaltsverzeichnis

Sprachen:

Andere Sartorius Laborausrüstung Handbücher

Sartorius

Sartorius Secura Quintix 26 Bedienungsanleitung

Sartorius

Sartorius Sartocheck 4 plus Bedienungsanleitung

Sartorius

Sartorius Sartocheck 4 plus Bedienungsanleitung

Sartorius

Sartorius Picus 2 Bedienungsanleitung

Sartorius

Sartorius Andrew Alliance Stand+ Bedienungsanleitung

Sartorius

Sartorius Sartorius SWC Bedienungsanleitung

Sartorius

Sartorius Vivaspin 500 Bedienungsanleitung

Sartorius

Sartorius Biozym Picus Bedienungsanleitung

Sartorius

Sartorius Cubis MCE Series Bedienungsanleitung

Sartorius

Sartorius Proline Bedienungsanleitung

Sartorius

Sartorius Vivacon 500 Bedienungsanleitung

Sartorius

Sartorius WZG Series Bedienungsanleitung

Sartorius

Sartorius Cubis MCA Series Bedienungsanleitung

Sartorius

Sartorius Maxicaps MR Virosart HF Bedienungsanleitung

Sartorius

Sartorius PICUS Bedienungsanleitung

Sartorius

Sartorius Midi Plus Bedienungsanleitung

Sartorius

Sartorius Tacta Bedienungsanleitung

Sartorius

Sartorius Sterisart Universal Pump 16420 Bedienungsanleitung

Sartorius

Sartorius Cubis MSU116P Bedienungsanleitung

Sartorius

Sartorius ePET Bedienungsanleitung

Sartorius

Sartorius BioPAT Trace Bedienungsanleitung

Sartorius

Sartorius Vivaspin Turbo 15 RC Bedienungsanleitung

Sartorius

Sartorius Cubis MCA2.7S Bedienungsanleitung

Sartorius

Sartorius YCP06SQ Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung