Satel SOW-300 Series Bedienungsanleitung

SOW-300

INDOOR LED BEACON

sow300_en 11/09

The SOW-300 indoor LED beacon is offered in two versions differing by the color of optical

signal (red in SOW-300 R, blue in SOW-300 BL).

1. FEATURES

•Optical signaling by means of super bright LEDs.

•3 selectable signaling modes.

•Tamper protection against opening the housing.

Fig. 1. View of the indoor LED beacon.

Explanations for Figure 1:

1 - housing base.

2 - screw for fixing the electronics board to the cover.

3 - electronics board.

4 - transparent element of the cover for light diffusion.

5 - cover.

6 - LEDs.

2 SOW-300 SATEL

2. DESCRIPTION OF ELECTRONICS BOARD

TMP TMP COM +12V

JP1

DOUBLE FLASH - LONG BREAK

FAST FLASHING

SLOW FLASHING

JP1 SETTINGS

Fig. 2. View of the electronics board.

Explanations for Figure 2:

1 - way of placing jumpers for suitable signaling mode:

- slow flashing (once a second),

- fast flashing (twice a second),

- two flashes, followed by a 1-second pause.

2 - JP1 pins for selecting the signaling mode.

3 - tamper contact reacting to housing opening.

4 - terminals:

TMP - tamper contact.

COM - common ground.

+12V - power supply input.

5 - fixing screw hole.

3. INSTALLATION AND CONNECTION

•The LED beacon may only be used indoor.

•The LED beacon should be installed on a flat surface by means of screws and expansion

bolts.

•All connections should only be made after the alarm system power supply has been

disconnected.

SATEL SOW-300 3

Fig. 3. Removing the cover.

TMP TMP COM

12V

SOW-300

INTEGRA 32

Fig. 4. Way of connecting the LED beacon to the alarm control panel, when signaling is to be

triggered by applying +12 V voltage (activating the OUT1 normal polarity high-current output).

The Z1 zone should be programmed as 24 h tamper.

INTEGRA 32

TMP TMP COM

12V

SOW-300

Fig. 5. Way of connecting the SOW-300 R LED beacon to the alarm control panel, when

signaling is to be triggered by applying the common ground (activating the OUT8 normal

polarity low-current output). The Z1 zone should be programmed as 24 h tamper.

4 SOW-300 SATEL

4. SPECIFICATIONS

Power supply voltage......................................................................................... 12 V DC ±15%

Maximum current consumption

SOW-300 R ................................................................................................44 mA

SOW-300 BL...............................................................................................85 mA

Environmental class........................................................................................... II (EN50130-5)

Operating temperature range..................................................................................-10...+55 °C

Dimensions .......................................................................................................... ø 97 x 37 mm

Weight.................................................................................................................................48 g

The latest EC declaration of conformity and product approval certificates are

available for downloading on website www.satel.eu

SATEL sp. z o.o.

ul. Schuberta 79

80-172 Gdańsk

POLAND

tel. + 48 58 320 94 00

[email protected]

www.satel.eu

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Satel Sicherheitssystem Handbücher

Satel

Satel ASP-201 Bedienungsanleitung

Satel

Satel SPLZ-1011 Bedienungsanleitung

Satel

Satel ASP-100 Bedienungsanleitung

Satel

Satel SPL-5020 Bedienungsanleitung

Satel

Satel INT-TSG Betriebsanleitung

Satel

Satel SP-6500 Bedienungsanleitung

Satel

Satel SPL-2010 Bedienungsanleitung

Satel

Satel MSP-300 Bedienungsanleitung

Satel

Satel ASP-105 Bedienungsanleitung

Satel

Satel ASP-215 Bedienungsanleitung

Satel

Satel Versa Bedienungsanleitung

Satel

Satel ASP-105 Bedienungsanleitung

Satel

Satel SPW-150 Bedienungsanleitung

Satel

Satel CA-64 E Bedienungsanleitung

Satel

Satel ASP-200 Bedienungsanleitung

Satel

Satel MICRA Bedienungsanleitung

Satel

Satel SP-4001 Bedienungsanleitung

Satel

Satel ROP-101/EU Bedienungsanleitung

Satel

Satel ABAX 2 ASP-200 Bedienungsanleitung

Satel

Satel SILVER Bedienungsanleitung

Satel

Satel SP-4003 R Bedienungsanleitung

Satel

Satel SPW-100 Bedienungsanleitung

Satel

Satel ECAM22 Bedienungsanleitung

Satel

Satel CA-4M Bedienungs- und Wartungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung