sauter CP P3 Bedienungsanleitung
Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern-sohn.com
Tel.: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction Manual / Data sheet
SAUTER CP P3
V. 2.0
06/2021
GB
CP P3-BA-e-2120.docx
2 CP P3-BA-e-2120.docx
GB
SAUTER CP P3
V. 2.0 06/2021
Instruction Manual / Data sheet
Summarize:
1Short description........................................................................................... 3
2Available models............................................................................................ 3
3Introduction.................................................................................................... 3
4Warning notes................................................................................................ 3
5Warranty......................................................................................................... 4
6Detailed specifications.................................................................................. 4
7Wiring.............................................................................................................. 5
8Dimensions in mm......................................................................................... 5
9Certificate of Compliance.............................................................................. 5
CP P3-BA-e-2120.docx 3
1 Short description
•Aluminum-alloy IP65 (acc. to EN 60529) single point load cell.
•Colorless anodized
•Suitable for platform scales, etc.
•Maximum platform size: 350 x 400 mm
•Accuracy OIML R60 C3
•Option on request accuracy C4
•RoHS conform
2 Available models
Capacity
Model
30kg
CP 30-3P3
40kg
CP 40-3P3
50kg
CP 50-3P3
75kg
CP 75-3P3
100kg
CP 100-3P3
3 Introduction
Please pay attention to the notes of the operating manual: read these operating manual
carefully before commissioning, even if you already have experience with SAUTER
measuring cells.
After receiving the measuring cell, it should be checked in advance whether no
transport damage has occurred, whether the outer packaging or other parts or even
the article itself has been damaged. If any damage is evident, please inform SAUTER
GmbH immediately.
4 Warning notes
Observe the national accident prevention regulations.
Not correct executed use of the measuring cell can lead to serious injuries, death,
material damage and personal injuries. Use only by trained and experienced people.
Never load more than the max. capacity to a measuring cell. Overloaded measuring
cells no longer have the required accuracy. Overloaded or deformed measuring cells
are no longer allowed to use and must be changed quickly.
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value when
shortened or extended the cable length.
4 CP P3-BA-e-2120.docx
5 Warranty
The warranty expires at:
•Disregard of the specifications of the operating manual
•Modification or opening the measuring cell
•Overload
•Mechanical damages
•Damage caused by liquids or media
•Natural loss
•Not correct installation
6 Detailed specifications
Output sensitivity ( FS )
mV/V
2.0 ± 0.2
Maximum capacity ( Emax )
kg
30, 40, 50, 75, 100
Max.number of load cell
intervals
nLC
3000
Ratio of min. LC verification
interval
Y = Emax
/ vmin
12000
Combined Error
%FS
≤± 0.0230
Minimum dead load
Of Emax
0%
Safe overload
of Emax
150 %
Ultimate overload
of Emax
300 %
Zero balance
of FS
< ± 2.0 %
Excitation, recommended
voltage
V
5 ~ 12
Excitation maximum
V
18
Input resistance
Ω
409 ± 6
Output resistance
Ω
350 ± 3
Insulation resistance
MΩ
≥5000 ( at 50VDC )
Compensated temperature
°C
-10 ~+40
Operating temperature
°C
-35 ~ +65
Storage temperature
°C
-40 ~ +70
Recommended torque on
fixation bolts
Nm
M6: 10
CP P3-BA-e-2120.docx 5
7 Wiring
Shielded, 6 conductor cable. Shield not connected to element.
Cable Diameter: Ø5mm Standard cable length: 3m Cable jacket is PVC.
6-wire diagram
Input(+)
Sense(+)
Output(-)
Sense(-)
Input(-)
Output(+)
Red
Blue
White
Brown
Black
Green
8 Dimensions in mm
9 Certificate of Compliance
To have a look at the CE Declaration of Conformity, please click onto the following link:
https://www.kern-sohn.com/shop/de/Downloads
Inhaltsverzeichnis
Andere sauter Messgerät Handbücher
sauter
sauter TC 1250-0.1 F Bedienungsanleitung
sauter
sauter TVP Bedienungsanleitung
sauter
sauter MFS-3202 Bedienungsanleitung
sauter
sauter TU-US Bedienungsanleitung
sauter
sauter FA Bedienungsanleitung
sauter
sauter SW 1000 Bedienungsanleitung
sauter
sauter HBA 100-0 Bedienungsanleitung
sauter
sauter FK 10 Bedienungsanleitung
sauter
sauter TC 1250-0.1F Bedienungsanleitung
sauter
sauter FC 10 Bedienungsanleitung
sauter
sauter FT 1K Bedienungsanleitung
sauter
sauter TC Series Bedienungsanleitung
sauter
sauter FC 1K-BT Bedienungsanleitung
sauter
sauter CT P1 Bedienungsanleitung
sauter
sauter LB Bedienungsanleitung
sauter
sauter TU 80-0.01US Bedienungsanleitung
sauter
sauter SP 200K Bedienungsanleitung
sauter
sauter FH Series Bedienungsanleitung
sauter
sauter FL Bedienungsanleitung
sauter
sauter FS Series Bedienungsanleitung
